Download Free Indiana Timber Industry An Assessment Of Timber Product Output And Use 2005 Book in PDF and EPUB Free Download. You can read online Indiana Timber Industry An Assessment Of Timber Product Output And Use 2005 and write the review.

In 2005, the primary wood-using mills in Indiana processed 84.2 million cubic feet of industrial roundwood, a decrease of 8 percent from 2000. The amount of industrial roundwood harvested during the same period decreased by 10 percent, from 83.0 million cubic feet in 2000 to 74.2 million cubic feet in 2005. Saw logs accounted for over 90 percent of the total industrial roundwood produced in 2005. The most harvested species groups in 2005 were red oaks, yellow-poplar, white oaks, hard maple, and hickory. Between 2000 and 2005, the production of saw logs decreased by nearly 10 percent, veneer logs increased by 26 percent, and pulpwood decreased by more than 30 percent. In 2005, the harvesting of industrial roundwood resulted in 59.2 million cubic feet of harvest residues left unused, on the ground at the harvest site. During the processing of industrial roundwood at Indiana's primary wood-using mills, 1.3 million green tons of mill residue was produced. Most of the mill residues were used at pulp or particleboard mills, or for miscellaneous uses such as mulch, livestock bedding, and small dimension lumber. Only 1 percent of the mill residues were not used for a secondary use.
Excerpt from Indiana Timber Industry: An Assessment of Timber Product Output and Use Figure 1. - Active primary wood-using mills and Forest Survey nits in Indiana, 1984. Sawmills are classed by volume of lumber produced in 1984: large more than 1 million board feet; medium to 1 million board feet (smaller sawmills not shown). Forest Survey Units are the geographic areas used by the Forest Inventory and Analysis Project to report periodic inventories and use of the Nation's forest resources.operating in the Unit and several sawmills in that area expanded and modernized their operations. Saw logs increased their dominance in industrial roundwood production from 72 percent of the total in 1966 to 90 percent in 1984. Pulpwood was second in volume, followed by veneer logs. Red oak led all other species in output (production), followed by white oak, yellow-poplar, and ash. 'lb gether, these four species provided nearly two thirds of the roundwood harvest, and the oaks alone provided 46 percent. Other important species were hickory and hard maple. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
This report contains the findings of a 2005 canvass of all primary wood-using plains in Virginia, and presents changes in product output and residue use since 2003. It complements the forest Forest Inventory and Analysis periodic inventory of volume and removals from the State's timberland.
This report contains the findings of a 2005 canvass of all primary wood-using plains in the South, and presents changes in product output and residue use from 2002/2003 to 2005. It complements the forest Forest Inventory and Analysis periodic inventory of volume and removals from southern timberland.
This report contains the findings of a 2005 canvass of all primary wood-using plains in Florida, and presents changes in product output and residue use since 2003. It complements the forest Forest Inventory and Analysis periodic inventory of volume and removals from the State's timberland.
Excerpt from Indiana Timber Industry: An Assessment of Timber Product Output and Use, 1990 This bulletin discusses recent Indiana forest industry trends and contains the results of a detailed study of the forest industry. Industrial roundwood produc tion. And associated primary mill wood and bark residue in Indiana in 1990. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
In 2008, there were 184 primary wood-processing mills in Indiana, 52 fewer mills than in 2005. These mills processed 68.4 million cubic feet of industrial roundwood, of which 58 million cubic feet was harvested from within the State. Another 5.8 million cubic feet of the industrial roundwood harvested in Indiana was sent to primary wood-processing mills in other states and countries. Saw logs accounted for 89 percent of the total harvest. The harvesting of industrial roundwood products produced 50.6 million cubic feet of harvest residues. Primary wood-processing mills generated 1.03 million green tons of mill residues, with less than 1 percent of the mill residues generated not used for other products