Download Free In Situ Thermal Technologies For Site Remediation Book in PDF and EPUB Free Download. You can read online In Situ Thermal Technologies For Site Remediation and write the review.

In Situ Thermal Technologies for Site Remediation is a comprehensive volume covering the state-of-the-art in the field. The book begins with a basic review of the thermodynamics of heat transfer and contaminant behavior in soils and is followed by summaries of data on various soil heating technologies. Technologies covered include steam injection, radio frequency (RF), Joule resistance, passive and active solar heating, and hot gas injection. For each technology, actual applications, costs, discussions of advantages and disadvantages, and a thorough literature review are provided. In Situ Thermal Technologies for Site Remediation can help engineers in selecting and implementing the appropriate technologies for specific situations. The book will assist managers in their review and evaluation of technologies. Regulators will gain a better understanding of the applicability of available technologies after reading this volume.
At hundreds of thousands of commercial, industrial, and military sites across the country, subsurface materials including groundwater are contaminated with chemical waste. The last decade has seen growing interest in using aggressive source remediation technologies to remove contaminants from the subsurface, but there is limited understanding of (1) the effectiveness of these technologies and (2) the overall effect of mass removal on groundwater quality. This report reviews the suite of technologies available for source remediation and their ability to reach a variety of cleanup goals, from meeting regulatory standards for groundwater to reducing costs. The report proposes elements of a protocol for accomplishing source remediation that should enable project managers to decide whether and how to pursue source remediation at their sites.
Environmental remediation technologies to control or prevent pollution from hazardous waste material is a growing research area in academia and industry, and is a matter of utmost concern to public health, to improve ecology and to facilitate the redevelopment of a contaminated site. Recently, in situ and ex situ remediation technologies have been developed to rectify the contaminated sites, utilizing various tools and devices through physical, chemical, biological, electrical, and thermal processes to restrain, remove, extract, and immobilize mechanisms to minimize the contamination effects. This handbook brings altogether classical and emerging techniques for hazardous wastes, municipal solid wastes and contaminated water sites, combining chemical, biological and engineering control methods to provide a one-stop reference. This handbook presents a comprehensive and thorough description of several remediation techniques for contaminated sites resulting from both natural processes and anthropogenic activities. Providing critical insights into a range of treatments from chemical oxidation, thermal treatment, air sparging, electrokinetic remediation, stabilization/solidification, permeable reactive barriers, thermal desorption and incineration, phytoremediation, biostimulation and bioaugmentation, bioventing and biosparging through ultrasound-assisted remediation methods, electrochemical remediation methods, and nanoremediation, this handbook provides the reader an inclusive and detailed overview and then discusses future research directions. Closing chapters on green sustainable remediation, economics, health and safety issues, and environmental regulations around site remediation will make this a must-have handbook for those working in the field.
There may be nearly 300,000 waste sites in the United States where ground water and soil are contaminated. Yet recent studies question whether existing technologies can restore contaminated ground water to drinking water standards, which is the goal for most sites and the result expected by the public. How can the nation balance public health, technological realities, and cost when addressing ground water cleanup? This new volume offers specific conclusions, outlines research needs, and recommends policies that are technologically sound while still protecting health and the environment. Authored by the top experts from industry and academia, this volume: Examines how the physical, chemical, and biological characteristics of the subsurface environment, as well as the properties of contaminants, complicate the cleanup task. Reviews the limitations of widely used conventional pump-and-treat cleanup systems, including detailed case studies. Evaluates a range of innovative cleanup technologies and the barriers to their full implementation. Presents specific recommendations for policies and practices in evaluating contamination sites, in choosing remediation technologies, and in setting appropriate cleanup goals.
This volume provides comprehensive up-to-date descriptions of the principles and practices of in situ chemical oxidation (ISCO) for groundwater remediation based on a decade of intensive research, development, and demonstrations, and lessons learned from commercial field applications.
This book presents a comprehensive, up-to-date review of technologies for cleaning up contaminants in groundwater and soil. It provides a special focus on three classes of contaminants that have proven very difficult to treat once released to the subsurface: metals, radionuclides, and dense nonaqueous-phase liquids such as chlorinated solvents. Groundwater and Soil Cleanup was commissioned by the Department of Energy (DOE) as part of its program to clean up contamination in the nuclear weapons production complex. In addition to a review of remediation technologies, the book describes new trends in regulation of contaminated sites and assesses DOE's program for developing new subsurface cleanup technologies.
Reviews of Environmental Contamination and Toxicology provides concise, critical reviews of timely advances, philosophy and significant areas of accomplished or needed endeavor in the total field of xenobiotics, in any segment of the environment, as well as toxicological implications.
In the late 1970s and early 1980s, our nation began to grapple with the legacy of past disposal practices for toxic chemicals. With the passage in 1980 of the Comprehensive Envir- mental Response, Compensation, and Liability Act (CERCLA), commonly known as Sup- fund, it became the law of the land to remediate these sites. The U. S. Department of Defense (DoD), the nation’s largest industrial organization, also recognized that it too had a legacy of contaminated sites. Historic operations at Army, Navy, Air Force, and Marine Corps facilities, ranges, manufacturing sites, shipyards, and depots had resulted in widespread contamination of soil, groundwater, and sediment. While Superfund began in 1980 to focus on remediation of heavily contaminated sites largely abandoned or neglected by the private sector, the DoD had already initiated its Installation Restoration Program in the mid-1970s. In 1984, the DoD began the Defense Environmental Restoration Program (DERP) for contaminated site assessment and remediation. Two years later, the U. S. Congress codified the DERP and directed the Secretary of Defense to carry out a concurrent program of research, development, and demonstration of innovative remediation technologies. As chronicled in the 1994 National Research Council report, “Ranking Hazardous-Waste Sites for Remedial Action,” our early estimates on the cost and suitability of existing techn- ogies for cleaning up contaminated sites were wildly optimistic. Original estimates, in 1980, projected an average Superfund cleanup cost of a mere $3.
Environmental Treatment Technologies for Municipal, Industrial and Medical Wastes will provide the reader with a simple and clear path to analyze the full range of options to manage/treat any solid, hazardous, or medical waste problems/issues at hand. This book aims to disseminate information on available remediation treatment technologies to developing and developed countries. It also includes adequate information on all available treatment technologies for different types and categories of waste (hazardous, non-hazardous municipal solid waste, and medical waste). The technologies are grouped into the following categories: Containment technology; Soil washing; Thermal treatment; Vapor extraction; Bioremediation including Phytoremediation; Plasma/Incineration; Other Physical/Chemical treatments. It enlightens the effect of emissions during remediation activities on climate change and suggests measures to identify and control such emissions. It also covers the application of remote sensing technologies with examples and the impending issues of proper disinfection and disposal of COVID-19 related waste pertaining to the current pandemic. It is intended for almost anyone — ranging from college students and early career professionals interested in environmental pollution control, to graduate students, researchers and experienced professionals. This book will: cover several recent developments on various treatment technologies, including in situ applications and their emission/migration control methods including remote sensing technologies; deal with municipal solid waste, their treatment/disposal methods, recycling, and reuse in addition to the hazardous and medical waste management program; assist civil/environmental engineering students and local community organizations in evaluating the impact of an industry and its associated waste produced on-site; and cover how best to treat/manage the waste to arrive at a safe operation without impacting human health and the local environment.