Download Free Improving Quality Of Construction Demolition Waste Book in PDF and EPUB Free Download. You can read online Improving Quality Of Construction Demolition Waste and write the review.

A pre-demolition audit is a tool that can be used to both identify hazardous substances and assess the materials to be removed from the building or infrastructure, and consequently their potential value, prior to the demolition or renovation activity can be established. Audits are essential since they enable all stakeholders involved to get information on the composition of waste and make it easier to find markets for different waste types. It is likely that the European Commission will recommend all Member States to make this pre-demolition audit mandatory to increase high quality recycling of construction and demolition waste. The report presents the current pre-demolition audit systems and existing guidelines in Denmark, Finland and Sweden. The report gives recommendations on key elements to be included in audits for improving the quality of the construction and demolition waste.
Available online: https://pub.norden.org/temanord2021-508/ The national strategies for a circular economy set the overall targets for implementation of circular economy in the country. Putting theory into practice via local strategies can be a good means for the transition towards a circular economy in the construction sector. Municipalities can set demands for CE solutions by requiring, e.g. the use of recycled and/or recyclable construction materials, the application of design for disassembly principles in construction and requiring resource mapping, and reuse and recycling in the demolition phase. The study identifies and presents cases and experiences from the implementation of CE concepts at the local level in the Nordic communities with a focus on construction, renovation and demolition. Barriers and drivers for the uptake of CE solutions are analysed, and enabling factors that could support the implementation of circular economy concepts and identified barriers in norms, legislation and guidelines are described. As part of the project, the project group gave 10 policy recommendations.
This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.
The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals.Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates.Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field. - Summarises key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts and meet national, regional and global environmental targets - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste
This book offers a valuable tool for understanding current efforts to promote the reuse and enhancement of pre-consumer waste in the development of new products for the construction sector, as well as the financial and regulatory tools being used to support this trend. It explores the vast and complex topic of the circular economy from the perspective of strategies for the reuse/recycling of waste, and develops a number of key premises: waste reuse/recycling must be considered using a logic of cross-sectoriality, recognizing the need to enhance the “dialogue” between different sectors; pre-consumer waste is particularly interesting for the recycling market because the construction sector can reduce its environmental impacts by enhancing its capacity to use secondary raw materials and by-products from other sectors; and lastly, the manufacturing sector is currently experimenting with promising forms of reducing/recycling pre-consumer waste and is at the same time providing by-products that can be used in other production chains. As such, the book offers a valuable asset for professionals who are interested in sustainability in construction, and in the study of construction products; however, it will be equally useful for local decision-makers tasked with implementing development policies and innovations in the industrial sector.
This set of proceedings is based on the International Conference on Advances in Building Technology in Hong Kong on 4-6 December 2002. The two volumes of proceedings contain 9 invited keynote papers, 72 papers delivered by 11 teams , and 133 contributed papers from over 20 countries around the world. The papers cover a wide spectrum of topics across the three technology sub-themes of structures and construction, environment, and information technology. The variety within these categories spans a width of topics, and these proceedings provide readers with a good general overview of recent advances in building research.
Waste: A Handbook for Management, Second Edition, provides information on a wide range of hot topics and developing areas, such as hydraulic fracturing, microplastics, waste management in developing countries, and waste-exposure-outcome pathways. Beginning with an overview of the current waste landscape, including green engineering, processing principles and regulations, the book then outlines waste streams and treatment methods for over 25 different types of waste and reviews best practices and management, challenges for developing countries, risk assessment, contaminant pathways and risk tradeoffs. With an overall focus on waste recovery, reuse, prevention and lifecycle analysis, the book draws on the experience of an international team of expert contributors to provide reliable guidance on how best to manage wastes for scientists, managers, engineers and policymakers in both the private and public sectors. - Covers the assessment and treatment of different waste streams in a single book - Provides a hands-on report on each type of waste problem as written by an expert in the field - Highlights new findings and evolving problems in waste management via discussion boxes
Markets for many classes of recyclable materials are growing, but market failures and barriers are constraining some markets. This report presents the case for the use of 'industrial' policies which address such market failures and barriers.
Master's Thesis from the year 2014 in the subject Environmental Sciences, grade: Excellent, University of Alexandria (Faculty of Engineering-Production Department), course: Quality Improvement Tools and Techniques being used in the Analysis of an Environmental Problem, language: English, abstract: Environmental quality is a prime concern to sustain the development of Egypt. Solid wastes generated from human settlements are of the major environmental issues that concern and challenge Egypt today. SWM is a crucial public service issue affecting both environment and health. SWM in Egypt have always been, and will continue to be one of the most pressing challenges facing the Egyptian authorities for the coming decades unless appropriate solutions are derived. The intention of this search is to implement Quality Improvement Techniques in Environmental Engineering Field to analyze the Egyptian Waste Management problem and find applicable solutions according to the current situation givens. The main focus is on municipal solid wastes excluding hazardous wastes from it. SWM problem in Egypt can be summarized as the absence of a regular waste collection service; waste is dumped in open spaces, on access roads which are invaded by animals and waste pickers so, wastes are scattered and serve as breeding grounds for disease vectors and with the leachate from decomposing garbage nearby water sources and soil which results in food contamination, all this have serious environmental consequences. Alexandria, the second capital of Egypt is taken as practical case study of this search. The field of solid waste management is as old as human beings age. Since that waste is a product that is commonly developed due to human living. This sector has been of such concern for all cultures all along the history because of its significant effects on both the human health and his surrounding environment. The effects on health appears in terms of disease spread like cholera and plague; that were really developed due to poor means of handling solid wastes at this time. While the significant effects that could affect the environment appear in terms of land degradation and soil contamination. But a huge gap has occurred in the development and improvement of this field between developed and developing countries along time. In developing countries like Egypt, the situation is deteriorated in terms of inadequate waste collection service resulting in poor waste collection coverage efficiency that led to waste “garbage” spread on the access roads of the cities. [...]
Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste