Download Free Ibm Linear Tape File System Enterprise Edition V1112 Installation And Configuration Guide Book in PDF and EPUB Free Download. You can read online Ibm Linear Tape File System Enterprise Edition V1112 Installation And Configuration Guide and write the review.

This IBM® Redbooks® publication helps you with the planning, installation, and configuration of the new IBM Linear Tape File SystemTM (LTFS) Enterprise Edition (EE) V1.1.1.2 for the IBM TS3310, IBM TS3500, and IBM TS4500 tape libraries. LTFS EE enables the use of LTFS for the policy management of tape as a storage tier in an IBM General Parallel File System (IBM GPFSTM) based environment and helps encourage the use of tape as a critical tier in the storage environment. LTFS EE can run any application that is designed for disk files on tape. LTFS EE supports IBM Linear Tape-Open (LTO) Ultrium 6 and 5 tape drives in IBM TS3310, TS3500, and TS4500 tape libraries. IBM TS1140 and IBM TS1150 tape drives are supported in TS3500 and TS4500 tape libraries. LTFS EE can play a major role in reducing the cost of storage for data that does not need the access performance of primary disk. The use of LTFS EE to replace disks with tape in Tier 2 and Tier 3 storage can improve data access over other storage solutions because it improves efficiency and streamlines management for files on tape. LTFS EE simplifies the use of tape by making it transparent to the user and manageable by the administrator under a single infrastructure. This publication is intended for anyone who wants to understand more about LTFS EE planning and implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists.
This IBM® Redbooks® publication helps you with the planning, installation, and configuration of the new IBM Spectrum® Archive Enterprise Edition (EE) Version 1.3.2.2 for the IBM TS4500, IBM TS3500, IBM TS4300, and IBM TS3310 tape libraries. IBM Spectrum Archive Enterprise Edition enables the use of the LTFS for the policy management of tape as a storage tier in an IBM Spectrum Scale based environment. It also helps encourage the use of tape as a critical tier in the storage environment. This edition of this publication is the tenth edition of IBM Spectrum Archive Installation and Configuration Guide. IBM Spectrum Archive EE can run any application that is designed for disk files on a physical tape media. IBM Spectrum Archive EE supports the IBM Linear Tape-Open (LTO) Ultrium 9, 8, 7, 6, and 5 tape drives. and the IBM TS1160, TS1155, TS1150, and TS1140 tape drives. IBM Spectrum Archive EE can play a major role in reducing the cost of storage for data that does not need the access performance of primary disk. The use of IBM Spectrum Archive EE to replace disks with physical tape in tier 2 and tier 3 storage can improve data access over other storage solutions because it improves efficiency and streamlines management for files on tape. IBM Spectrum Archive EE simplifies the use of tape by making it transparent to the user and manageable by the administrator under a single infrastructure. This publication is intended for anyone who wants to understand more about IBM Spectrum Archive EE planning and implementation. This book is suitable for IBM customers, IBM Business Partners, IBM specialist sales representatives, and technical specialists.
IBM® System z® servers offer a full range of connectivity options for attaching peripheral or internal devices for input and output to the server. At the other end of these connections are a variety of devices for data storage, printing, terminal I/O, and network routing. This combination of connectivity and hardware offer System z customers solutions to meet most connectivity requirements. However, to make use of these features, the System z server must be properly configured. This IBM Redbooks® publication takes a high-level look at the tools and processes involved in configuring a System z server. We provide an introduction to the System z channel subsystem and the terminology frequently used in the hardware definition process. We examine the features and functions of tools used in the hardware definition process, such as HCD, CHPID Mapping Tool, and HCM. We discuss the input and output of these tools (IODF, IOCP, IOCDS) and their relationship to one another. We also provide a high-level overview of the hardware configuration process (the flow of generating a valid I/O configuration). We provide configuration examples using both HCD and HCM. The book also discusses available new functions and guidelines for the effective use of HCD and HCM. This document is intended for system programmers and administrators who are responsible for defining and activating hardware changes to z/OS® and System z servers, and for the IBM representatives who need this information. General knowledge of z/OS and IOCP is assumed.
The IBM® Linear Tape File System (LTFS) is the first file system that works in conjunction with Linear Tape-Open (LTO) tape technology to set a new standard for ease of use and portability for open systems tape storage. In 2011, LTFS won an Engineering Emmy Award for Innovation from the Academy of Television Arts & Sciences. This IBM Redbooks® publication helps you install, tailor, and configure the new IBM Linear Tape File System Single Drive Edition (LTFS SDE), Library Edition (LTFS LE), and Storage Manager (LTFS SM). LTFS is a file system that is implemented on dual-partition linear tape (IBM LTO Ultrium 5 tape drives (LTO-5), IBM LTO Ultrium 6 tape drives (LTO-6), and IBM TS1140 tape drives). LTFS makes tape look and work like any removable media, for example, a USB drive. Files and directories appear on the desktop as a directory listing. It is now simple to drag files to and from tape. Any application that is written to use disk files works with the same files on tape. LTFS SDE supports stand-alone drives only. LTFS LE supports tape libraries. LTFS LE presents each cartridge in the library as a subdirectory in the LTFS file system. With LTFS LE, you can list the contents and search all of the volumes in the library without mounting the volumes by using an in-memory index. The LTFS SM software solution provides storage lifecycle management of archive files. Although both the LTFS SDE and the LTFS LE can write data on tape, LTFS SM provides the interface to manage files of all types in a file system structure. This file system structure makes the control of the tape library transparent to the user. LTFS SM also provides policy-based management, job scheduling, and automated file management. It provides an integrated solution to tape library users that is designed to easily manage archives at a reduced cost. It provides the tools to manage the archived files on the LTFS tapes, to group tapes into pools, and to use multiple LTFS LE nodes to scale out the LTFS archive. Metadata can be used to arrange, search, and manage the files at convenience of the users according to the policies that they choose. This publication is intended for anyone who wants to understand more about IBM Linear Tape System products and their implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists.
This IBM® Redbooks® publication describes the concepts, architecture, and implementation of the IBM System Storage® DS8700 storage subsystem. This book has reference information that will help you plan for, install, and configure the DS8700 and also discusses the architecture and components. The DS8700 is the most advanced model in the IBM System Storage DS8000® series. It includes IBM POWER6®-based controllers, with a dual 2-way or dual 4-way processor complex implementation. Its extended connectivity, with up to 128 Fibre Channel/FICON® ports for host connections, make it suitable for multiple server environments in both open systems and IBM System z® environments. If desired, the DS8700 can be integrated in an LDAP infrastructure. The DS8700 supports thin provisioning. Depending on your specific needs, the DS8700 storage subsystem can be equipped with SATA drives, FC drives, and Solid® State Drives (SSDs). The DS8700 can now automatically optimize the use of SSD drives through its no charge Easy Tier feature. The DS8700 also supports Full Disk Encryption (FDE) feature. Its switched Fibre Channel architecture, dual processor complex implementation, high availability design, and the advanced Point-in-Time Copy and Remote Mirror and Copy functions that incorporates make the DS8700 storage subsystem suitable for mission-critical business functions.
Note: This is a republication of IBM Spectrum Archive Enterprise Edition V1.2.6: Installation and Configuration Guide with new book number SG24-8445 to keep the content available on the Internet along with the recent publication IBM Spectrum Archive Enterprise Edition V1.3.0: Installation and Configuration Guide, SG24-8333. This IBM® Redbooks® publication helps you with the planning, installation, and configuration of the new IBM SpectrumTM Archive V1.2.6 for the IBM TS3310, IBM TS3500, IBM TS4300, and IBM TS4500 tape libraries. IBM Spectrum ArchiveTM EE enables the use of the LTFS for the policy management of tape as a storage tier in an IBM Spectrum ScaleTM based environment. It helps encourage the use of tape as a critical tier in the storage environment. This is the sixth edition of IBM Spectrum Archive Installation and Configuration Guide. IBM Spectrum Archive EE can run any application that is designed for disk files on a physical tape media. IBM Spectrum Archive EE supports the IBM Linear Tape-Open (LTO) Ultrium 8, 7, 6, and 5 tape drives in IBM TS3310, TS3500, TS4300, and TS4500 tape libraries. In addition, IBM TS1155, TS1150, and TS1140 tape drives are supported in TS3500 and TS4500 tape library configurations. IBM Spectrum Archive EE can play a major role in reducing the cost of storage for data that does not need the access performance of primary disk. The use of IBM Spectrum Archive EE to replace disks with physical tape in tier 2 and tier 3 storage can improve data access over other storage solutions because it improves efficiency and streamlines management for files on tape. IBM Spectrum Archive EE simplifies the use of tape by making it transparent to the user and manageable by the administrator under a single infrastructure. This publication is intended for anyone who wants to understand more about IBM Spectrum Archive EE planning and implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists.
This IBM® Redbooks® publication provides guidance about how to configure, monitor, and manage your IBM DS8880 storage systems to achieve optimum performance, and it also covers the IBM DS8870 storage system. It describes the DS8880 performance features and characteristics, including hardware-related performance features, synergy items for certain operating systems, and other functions, such as IBM Easy Tier® and the DS8000® I/O Priority Manager. The book also describes specific performance considerations that apply to particular host environments, including database applications. This book also outlines the various tools that are available for monitoring and measuring I/O performance for different server environments, and it describes how to monitor the performance of the entire DS8000 storage system. This book is intended for individuals who want to maximize the performance of their DS8880 and DS8870 storage systems and investigate the planning and monitoring tools that are available. The IBM DS8880 storage system features, as described in this book, are available for the DS8880 model family with R8.0 release bundles (Licensed Machine Code (LMC) level 7.8.0).
The Definitive Guide to File System Analysis: Key Concepts and Hands-on Techniques Most digital evidence is stored within the computer's file system, but understanding how file systems work is one of the most technically challenging concepts for a digital investigator because there exists little documentation. Now, security expert Brian Carrier has written the definitive reference for everyone who wants to understand and be able to testify about how file system analysis is performed. Carrier begins with an overview of investigation and computer foundations and then gives an authoritative, comprehensive, and illustrated overview of contemporary volume and file systems: Crucial information for discovering hidden evidence, recovering deleted data, and validating your tools. Along the way, he describes data structures, analyzes example disk images, provides advanced investigation scenarios, and uses today's most valuable open source file system analysis tools—including tools he personally developed. Coverage includes Preserving the digital crime scene and duplicating hard disks for "dead analysis" Identifying hidden data on a disk's Host Protected Area (HPA) Reading source data: Direct versus BIOS access, dead versus live acquisition, error handling, and more Analyzing DOS, Apple, and GPT partitions; BSD disk labels; and Sun Volume Table of Contents using key concepts, data structures, and specific techniques Analyzing the contents of multiple disk volumes, such as RAID and disk spanning Analyzing FAT, NTFS, Ext2, Ext3, UFS1, and UFS2 file systems using key concepts, data structures, and specific techniques Finding evidence: File metadata, recovery of deleted files, data hiding locations, and more Using The Sleuth Kit (TSK), Autopsy Forensic Browser, and related open source tools When it comes to file system analysis, no other book offers this much detail or expertise. Whether you're a digital forensics specialist, incident response team member, law enforcement officer, corporate security specialist, or auditor, this book will become an indispensable resource for forensic investigations, no matter what analysis tools you use.
The IBM® Linear Tape File SystemTM (LTFS) is the first file system that works along with Linear Tape-Open (LTO) tape technology to set a new standard for ease of use and portability for open systems tape storage. In 2011, LTFS won an Engineering Emmy Award for Innovation from the Academy of Television Arts & Sciences. This IBM Redbooks® publication helps you install, tailor, and configure the IBM SpectrumTM Archive Single Drive Edition (SDE) and the IBM Spectrum ArchiveTM Library Edition (LE) products. LTFS is a file system that was originally implemented on dual-partition linear tape (IBM LTO Ultrium 5 tape drives (LTO-5) and IBM TS1140 tape drives). Now IBM Spectrum Archive SDE and LE support IBM LTO Ultrium 8, 7, 6, or 5 tape drives, and IBM TS1155, IBM TS1150, and IBM TS1140 tape drives. IBM Spectrum Archive LE supports the IBM TS4500 tape library, IBM TS3500 tape library, IBM TS3310 tape library, IBM TS3200 tape library express, IBM TS3100 tape library express, and IBM TS2900 tape autoloader express. IBM Spectrum Archive makes tape look and work like any removable media, such as a USB drive. Files and directories appear on the desktop as a directory listing. It is now simple to drag files to and from tape. Any application that is written to use disk files works with the same files on tape. IBM Spectrum Archive SDE supports stand-alone drives only. IBM Spectrum Archive LE supports tape libraries. IBM Spectrum Archive LE presents each cartridge in the library as a subdirectory in the LTFS file system. With IBM Spectrum Archive LE, you can list the contents and search all of the volumes in the library without mounting the volumes by using an in-memory index. This publication is intended for anyone who wants to understand more about IBM Linear Tape System products and their implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists.