Download Free Hybride Und Energieeffiziente Antriebe Fuer Mobile Arbeitsmaschinen 7 Fachtagung 20 Februar 2019 Karlsruhe Book in PDF and EPUB Free Download. You can read online Hybride Und Energieeffiziente Antriebe Fuer Mobile Arbeitsmaschinen 7 Fachtagung 20 Februar 2019 Karlsruhe and write the review.

In this book, a new three-dimensional approach for the process simulation of SMC is developed. This approach takes into account both, the core layer that is dominated by the extensional viscosity and the thin lubrication layer. In order to transfer the information from the process to the structure simulation, a CAE chain is further developed. In addition, a new rheological tool is developed to analyze flow behavior experimentally and to provide the required material parameters.
Fiber-reinforced materials offer a huge potential for lightweight design of load-bearing structures. However, high-volume production of such parts is still a challenge in terms of cost efficiency and competitiveness. Numerical process simulation can be used to analyze underlying mechanisms and to find a suitable process design. In this study, the curing process of the resin is investigated with regard to its influence on RTM mold filling and process-induced distortion.
In this work, contributes to the optimization of local continuous fiber reinforcement patches, under consideration of manufacturing constraints. This approach requires specific optimization strategies. Therefore, an multi-objective optimization strategy for the placement of local reinforcement patches, under consideration of manufacturing constraints, has been developed. During the multi objective optimization, structural and process related objectives are considered.
In this work, initially, the requirements on a simulation model of the non-isothermal stamp forming process of unidirectional fiber-reinforced, and thermoplastic tape laminates are investigated experimentally. On this basis, different isothermal as well as a fully coupled thermomechanical simulation model under consideration of the crystallization kinetics are developed. For validation, a complex shaped geometry is simulated and compared to experimental forming results.
A weave reinforced composite material with a thermoplastic matrix is investigated by using a multiscale chain to predict the macroscopic material behavior. A large-strain framework for constitutive modeling with focus on material non-linearities, i.e. plasticity and damage is defined. The ability of the geometric and constitutive models to predict the deformation and failure behavior is demonstrated by means of selected examples.
This work aims at improving the energy consumption forecast of electric vehicles by enhancing the prediction with a notion of uncertainty. The algorithm itself learns from driver and traffic data in a training set to generate accurate, driver-individual energy consumption forecasts.
This work focuses on the development of a quantification method for GHG (CO2e) emissions from construction machines. The method considers CO2e reduction potentials in the time past-present–future, through influencing factors from six pillars: Machine efficiency, process efficiency, energy source, operating efficiency, material efficiency and CCS. In addition, transformation solutions are proposed to reduce GHG emissions from construction machines like liquid methane, fuel cell drive or CCS.
The work provides novel methods to process inertial sensor and acoustic sensor data for road condition estimation and monitoring with application in vehicles, which serve as sensor platforms. Furthermore, methods are introduced to combine the results from various vehicles for a more reliable estimation.
Der Tagungsband enthält die Beiträge zu den Vorträgen der 9. Fachtagung vom 28. Februar 2023 in Karlsruhe. In 12 Artikeln wird über den Stand der Forschung und neue Entwicklungen auf dem Gebiet der Antriebstechnik für mobile Arbeitsmaschinen berichtet. Der Tagungsband zeichnet sich durch Fachbeiträge zu klimaneutralen, effizienzoptimierten und elektrifizierten Antrieben in verschiedensten Maschinen aus. Neben Fahrantrieben werden auch nachhaltige und innovative Arbeitsantriebe thematisiert. - This book contains the conference proceedings to the lectures of the 9th symposium on 28th February 2023 in Karlsruhe. The state of research and new developments in the field of drive technology for mobile machines are reported in 12 articles. The conference proceedings are characterized by technical contributions on climate-neutral, efficiency-optimized and electrified drives in a variety of machines. In addition to traction drives, drive systems for performing work tasks are also addressed.