Download Free Human Factors For The Design Operation And Maintenance Of Mining Equipment Book in PDF and EPUB Free Download. You can read online Human Factors For The Design Operation And Maintenance Of Mining Equipment and write the review.

Machines increasingly pervade the mining industry, reducing manual labor and raising production. While the use of new technologies such as remote control, vision enhancement technologies, continuous haulage, and automated equipment has grown, so has the potential for new health and safety risks. Written by leading experts from Australia and North A
Human-Centered Design for Mining Equipment and New Technology first introduces Human-Centered Design (HCD) and outlines the benefits of this approach for mining equipment and new technology: HCD is a process that aims to make equipment and systems more usable and acceptable by explicitly focusing on the end-user, their tasks and their work environment/use context. The book outlines three linked areas of mining HCD: key principles, examples of design processes, and what kinds of tools for data collection and evaluation are available. The possible future uses of Human-Centered Design in more fully automated mining are presented, and the role of HCD within wider human system integration are outlined. The ‘how to’ nature of this book makes it attractive to mining equipment manufacturers, technology developers, mine site personnel, human factors researchers, safety scientists and regulators. Features: Includes an introduction useful to anyone wanting to learn about the field Provides extensive case studies of HCD which also show failures when HCD was not considered Covers cutting edge mining technology- such as proximity detection devices and new mining automation systems Directly outlines the benefits of HCD for the minerals industry Human-Centered Design for Mining Equipment and New Technology, through case studies, provides a much needed guide to undertaking HCD for mining equipment and new technology.
The broad and developing scope of ergonomics - the application of scientific knowledge to improve people‘s interaction with products, systems and environments - has been illustrated for 25 years by the books which make up the Contemporary Ergonomics series. This book presents the proceedings of the international conference on Ergonomics and Human F
Acceptance of new technology and systems by drivers is an important area of concern to governments, automotive manufacturers and equipment suppliers, especially technology that has significant potential to enhance safety. To be acceptable, new technology must be useful and satisfying to use. If not, drivers will not want to have it, in which case it will never achieve the intended safety benefit. Even if they have the technology, drivers may not use it if it is deemed unacceptable, or may not use it in the manner intended by the designer. At worst, they may seek to disable it. This book brings into a single edited volume the accumulating body of thinking and research on driver and operator acceptance of new technology. Bringing together contributions from international experts from around the world, the editors have shaped a book that covers the theory behind acceptance, how it can be measured and how it can be improved. Case studies are presented that provide data on driver acceptance of a wide range of new and emerging vehicle technology. Although driver acceptance is the central focus of this book, acceptance of new technology by operators in other domains, and across cultures, is also investigated. Similarly, perspectives are derived from domains such as human computer interaction, where user acceptance has long been regarded as a key driver of product success. This book comes at a critical time in the history of the modern motor vehicle, as the number of new technologies entering the modern vehicle cockpit rapidly escalates. The goal of this book is to inspire further research and development of new vehicle technology to optimise user acceptance of it; and, in doing so, to maximise its potential to be useful, satisfying to use and able to save human life.
The mining industry has experienced important improvements with regard to its safety record and work environment. But there is still room for further improvement and the mining industry now faces the challenge of securing a future workforce: The current workforce is aging, and mining work increasingly requires a more qualified workforce. Designing Ergonomic, Safe, and Attractive Mining Workplaces seeks to give an understanding of what must be considered in the design of mining workplaces. By reviewing and discussing the historic and current development of the mining industry as well as problems related to the safety, ergonomics, and attractiveness of mining workplaces, it demonstrates that the challenges facing the mining industry often need to be solved on a case-to-case basis. The processes through which these issues are managed are of significant importance. To facilitate a proactive approach, the book covers the principles of systematic work environment management, together with examples of methods for risk management and work environment monitoring. It introduces a systematic and iterative design and planning method for the mining industry. This method acknowledges that all relevant stakeholders must be able to influence the design of ergonomic, safe, and attractive mining workplaces. Features Takes a holistic and sociotechnical approach to current and future problems of the mining industry, which normally are dealt with in isolation or through technology Reviews historic, current, and future issues in the mining industry with regards to workplace attractiveness, health, safety, mechanization, automation, and work organization Provides several examples of these issues and attempts to address them (successfully and unsuccessfully) Covers the principles of systematic work environment management together with examples of methods for risk management and work environment monitoring for pro-actively dealing with work environment issues Introduces a systematic and iterative design and planning method for the mining industry that aims to avoid problems of traditional planning approaches and increase stakeholder and employee participation
The broad and developing scope of ergonomics - the application of scientific knowledge to improve people‘s interaction with products, systems and environments - has been illustrated for 27 years by the books which make up the Contemporary Ergonomics series.This book presents the proceedings of the international conference on Contemporary Ergonomics
The Cambridge Workshops on Universal Access and Assistive Technology (CWUAAT) are a series of workshops held at a Cambridge University College every two years. The workshop theme: “Designing inclusion for real-world applications” refers to the emerging potential and relevance of the latest generations of inclusive design thinking, tools, techniques, and data, to mainstream project applications such as healthcare and the design of working environments. Inclusive Design Research involves developing tools and guidance enabling product designers to design for the widest possible population, for a given range of capabilities. There are five main themes: Designing for the Real-World Measuring Demand And Capabilities Designing Cognitive Interaction with Emerging Technologies Design for Inclusion Designing Inclusive Architecture In the tradition of CWUAAT, we have solicited and accepted contributions over a wide range of topics, both within individual themes and also across the workshop’s scope. We ultimately hope to generate more inter-disciplinary dialogues based on focused usage cases that can provide the discipline necessary to drive further novel research, leading to better designs. The aim is to impact industry and end-users as well governance and public design, thereby effectively reducing exclusion and difficulty in peoples’ daily lives and society.