Download Free High Speed Serial Buses In Embedded Systems Book in PDF and EPUB Free Download. You can read online High Speed Serial Buses In Embedded Systems and write the review.

This book describes the most frequently used high-speed serial buses in embedded systems, especially those used by FPGAs. These buses employ SerDes, JESD204, SRIO, PCIE, Aurora and SATA protocols for chip-to-chip and board-to-board communication, and CPCIE, VPX, FC and Infiniband protocols for inter-chassis communication. For each type, the book provides the bus history and version info, while also assessing its advantages and limitations. Furthermore, it offers a detailed guide to implementing these buses in FPGA design, from the physical layer and link synchronization to the frame format and application command. Given its scope, the book offers a valuable resource for researchers, R&D engineers and graduate students in computer science or electronics who wish to learn the protocol principles, structures and applications of high-speed serial buses.
Revison of: Computers as components / Wayne Wolf. 2008.
Embedded systems are today, widely deployed in just about every piece of machinery from toasters to spacecraft. Embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but more importantly to satisfy numerous other constraints. To achieve the current goals of design, the designer must be aware with such design constraints and more importantly, the factors that have a direct effect on them.One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand; single-purpose, general-purpose or application specific. Microcontrollers are one member of the family of the application specific processors.The book concentrates on the use of microcontroller as the embedded system?s processor, and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontroller.The book is ideal for undergraduate students and also the engineers that are working in the field of digital system design.Contents• Preface;• Process design metrics;• A systems approach to digital system design;• Introduction to microcontrollers and microprocessors;• Instructions and Instruction sets;• Machine language and assembly language;• System memory; Timers, counters and watchdog timer;• Interfacing to local devices / peripherals;• Analogue data and the analogue I/O subsystem;• Multiprocessor communications;• Serial Communications and Network-based interfaces.
This book is intended to provide a senior undergraduate or graduate student in electrical engineering or computer science with a balance of fundamental theory, review of industry practice, and hands-on experience to prepare for a career in the real-time embedded system industries. It is also intended to provide the practicing engineer with the necessary background to apply real-time theory to the design of embedded components and systems. Typical industries include aerospace, medical diagnostic and therapeutic systems, telecommunications, automotive, robotics, industrial process control, media systems, computer gaming, and electronic entertainment, as well as multimedia applications for general-purpose computing. This updated edition adds three new chapters focused on key technology advancements in embedded systems and with wider coverage of real-time architectures. The overall focus remains the RTOS (Real-Time Operating System), but use of Linux for soft real-time, hybrid FPGA (Field Programmable Gate Array) architectures and advancements in multi-core system-on-chip (SoC), as well as software strategies for asymmetric and symmetric multiprocessing (AMP and SMP) relevant to real-time embedded systems, have been added. Companion files are provided with numerous project videos, resources, applications, and figures from the book. Instructors’ resources are available upon adoption. FEATURES: • Provides a comprehensive, up to date, and accessible presentation of embedded systems without sacrificing theoretical foundations • Features the RTOS (Real-Time Operating System), but use of Linux for soft real-time, hybrid FPGA architectures and advancements in multi-core system-on-chip is included • Discusses an overview of RTOS advancements, including AMP and SMP configurations, with a discussion of future directions for RTOS use in multi-core architectures, such as SoC • Detailed applications coverage including robotics, computer vision, and continuous media • Includes a companion disc (4GB) with numerous videos, resources, projects, examples, and figures from the book • Provides several instructors’ resources, including lecture notes, Microsoft PP slides, etc.
Due to the rapidly expanding market for digital media services and systems, there is a growing interest in real-time systems. Real-Time Embedded Systems and Components is a much-needed resource addressing this field for practicing engineers and students, particularly engineers moving from best-effort applications to hard or soft real-time applications. The book is written to teach practicing engineers how to apply real-time theory to the design of embedded components and systems in order to successfully build a real-time embedded system. It is also intended to provide a balance of fundamental theory, review of industry practice, and hands-on experience for undergraduate seniors or first-year grad students preparing for a career in the real-time embedded system industries. Throughout the book, you'll explore hard real-time theory and soft real-time concepts, real-time scheduling, debugging components, high availability and high reliability design, system lifecycles, and the processes for hardware, firmware, and software development for systems built from components. And you'll find a balance of theory, practice, and applications to help you learn the fundamental concepts needed to build your own real-time embedded system.
Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.
Debugging Embedded and Real-Time Systems: The Art, Science, Technology and Tools of Real-Time System Debugging gives a unique introduction to debugging skills and strategies for embedded and real-time systems. Practically focused, it draws on application notes and white papers written by the companies who create design and debug tools. Debugging Embedded and Real Time Systems presents best practice strategies for debugging real-time systems, through real-life case studies and coverage of specialized tools such as logic analysis, JTAG debuggers and performance analyzers. It follows the traditional design life cycle of an embedded system and points out where defects can be introduced and how to find them and prevent them in future designs. It also studies application performance monitoring, the execution trace recording of individual applications, and other tactics to debug and control individual running applications in the multitasking OS. Suitable for the professional engineer and student, this book is a compendium of best practices based on the literature as well as the author's considerable experience as a tools' developer. - Provides a unique reference on Debugging Embedded and Real-Time Systems - Presents best practice strategies for debugging real-time systems - Written by an author with many years of experience as a tools developer - Includes real-life case studies that show how debugging skills can be improved - Covers logic analysis, JTAG debuggers and performance analyzers that are used for designing and debugging embedded systems
Written by hundreds experts who have made contributions to both enterprise and academics research, these excellent reference books provide all necessary knowledge of the whole industrial chain of integrated circuits, and cover topics related to the technology evolution trends, fabrication, applications, new materials, equipment, economy, investment, and industrial developments of integrated circuits. Especially, the coverage is broad in scope and deep enough for all kind of readers being interested in integrated circuit industry. Remarkable data collection, update marketing evaluation, enough working knowledge of integrated circuit fabrication, clear and accessible category of integrated circuit products, and good equipment insight explanation, etc. can make general readers build up a clear overview about the whole integrated circuit industry. This encyclopedia is designed as a reference book for scientists and engineers actively involved in integrated circuit research and development field. In addition, this book provides enough guide lines and knowledges to benefit enterprisers being interested in integrated circuit industry.
Embedded systems are nearly ubiquitous, and books on individual topics or components of embedded systems are equally abundant. Unfortunately, for those designers who thirst for knowledge of the big picture of embedded systems there is not a drop to drink. Until now. The Embedded Systems Handbook is an oasis of information, offering a mix of basic a
Embedded Systems Design with Platform FPGAs introduces professional engineers and students alike to system development using Platform FPGAs. The focus is on embedded systems but it also serves as a general guide to building custom computing systems. The text describes the fundamental technology in terms of hardware, software, and a set of principles to guide the development of Platform FPGA systems. The goal is to show how to systematically and creatively apply these principles to the construction of application-specific embedded system architectures. There is a strong focus on using free and open source software to increase productivity. Each chapter is organized into two parts. The white pages describe concepts, principles, and general knowledge. The gray pages provide a technical rendition of the main issues of the chapter and show the concepts applied in practice. This includes step-by-step details for a specific development board and tool chain so that the reader can carry out the same steps on their own. Rather than try to demonstrate the concepts on a broad set of tools and boards, the text uses a single set of tools (Xilinx Platform Studio, Linux, and GNU) throughout and uses a single developer board (Xilinx ML-510) for the examples. - Explains how to use the Platform FPGA to meet complex design requirements and improve product performance - Presents both fundamental concepts together with pragmatic, step-by-step instructions for building a system on a Platform FPGA - Includes detailed case studies, extended real-world examples, and lab exercises