Download Free High Speed Low Power Analog To Digital Converters Book in PDF and EPUB Free Download. You can read online High Speed Low Power Analog To Digital Converters and write the review.

One of the main trends of microelectronics is toward design for integrated systems, i.e., system-on-a-chip (SoC) or system-on-silicon (SoS). Due to this development, design techniques for mixed-signal circuits become more important than before. Among other devices, analog-to-digital and digital-to-analog converters are the two bridges between the analog and the digital worlds. Besides, low-power design technique is one of the main issues for embedded systems, especially for hand-held applications. Modular Low-Power, High-Speed CMOS Analog-to-Digital Converter for Embedded Systems aims at design techniques for low-power, high-speed analog-to-digital converter processed by the standard CMOS technology. Additionally this book covers physical integration issues of A/D converter integrated in SoC, i.e., substrate crosstalk and reference voltage network design.
Pipelined architecture analog-to-digital converters (ADCs) have become the architecture of choice for high speed and moderate to high resolution devices. Subsequently, different techniques of the fault diagnosis by built in self-test (BIST) system have been developed. This book gives a rigorous, theoretical and mathematical analysis for the design of pipelined ADCs, along with detailed practical aspects of implementing it in very large-scale integration (VLSI). In each chapter a unique fault diagnosis technique for pipelined ADC has been proposed. Chapter 1 discusses a 1.8V 10-bit 500 mega samples-per-second parallel pipelined ADC, describing the design of high speed, low power, low voltage ADC in CMOS technology. Chapter 2 introduces a BIST system where both the circuit and its diagnosis tool are implemented on the same chip. Chapter 3 examines the design of an oscillation-based BIST system for a 1.8V 8-bit 125-mega samples per second pipelined ADC. Chapter 4 focuses on the evaluation of dynamic parameters of a pipelined ADC with an oscillation-based BIST. Chapter 5 covers reconfigurable BIST architecture for pipelined ADCs. The book is an ideal reference for graduate students and researchers within electrical, electronics and computer engineering.
With the fast advancement of CMOS fabrication technology, more and more signal-processing functions are implemented in the digital domain for a lower cost, lower power consumption, higher yield, and higher re-configurability. This has recently generated a great demand for low-power, low-voltage A/D converters that can be realized in a mainstream deep-submicron CMOS technology. However, the discrepancies between lithography wavelengths and circuit feature sizes are increasing. Lower power supply voltages significantly reduce noise margins and increase variations in process, device and design parameters. Consequently, it is steadily more difficult to control the fabrication process precisely enough to maintain uniformity. The inherent randomness of materials used in fabrication at nanoscopic scales means that performance will be increasingly variable, not only from die-to-die but also within each individual die. Parametric variability will be compounded by degradation in nanoscale integrated circuits resulting in instability of parameters over time, eventually leading to the development of faults. Process variation cannot be solved by improving manufacturing tolerances; variability must be reduced by new device technology or managed by design in order for scaling to continue. Similarly, within-die performance variation also imposes new challenges for test methods. In an attempt to address these issues, Low-Power High-Resolution Analog-to-Digital Converters specifically focus on: i) improving the power efficiency for the high-speed, and low spurious spectral A/D conversion performance by exploring the potential of low-voltage analog design and calibration techniques, respectively, and ii) development of circuit techniques and algorithms to enhance testing and debugging potential to detect errors dynamically, to isolate and confine faults, and to recover errors continuously. The feasibility of the described methods has been verified by measurements from the silicon prototypes fabricated in standard 180nm, 90nm and 65nm CMOS technology.
Time-interleaved Analog-to-Digital Converters describes the research performed on low-power time-interleaved ADCs. A detailed theoretical analysis is made of the time-interleaved Track & Hold, since it must be capable of handling signals in the GHz range with little distortion, and minimal power consumption. Timing calibration is not attractive, therefore design techniques are presented which do not require timing calibration. The design of power efficient sub-ADCs is addressed with a theoretical analysis of a successive approximation converter and a pipeline converter. It turns out that the first can consume about 10 times less power than the latter, and this conclusion is supported by literature. Time-interleaved Analog-to-Digital Converters describes the design of a high performance time-interleaved ADC, with much attention for practical design aspects, aiming at both industry and research. Measurements show best-inclass performance with a sample-rate of 1.8 GS/s, 7.9 ENOBs and a power efficiency of 1 pJ/conversion-step.
High Speed Data Converters covers high speed data converters from the perspective of a leading high speed ADC designer and architect, with a strong emphasis on high speed Nyquist A/D converters. For our purposes, the term "high speed" is defined as sampling rates that are greater than 10 MS/s. The book is intended for engineers and students who design, evaluate or use high speed data converters. A basic foundation in circuits, devices and signal processing is required. The book is meant to bridge the gap between analysis and design, theory and practice, circuits and systems. It covers basic analog circuits and digital signal processing algorithms. There is a healthy dose of theoretical analysis in this book, combined with the practical issues and intuitive perspectives. Topics covered include: * Introduction to high-speed data conversion * Performance Metrics * Data Converter Architectures * Sampling * Comparators * Amplifiers * Pipelined A/D Converters * Time-interleaved Converters * Digitally Assisted Converters * Evolution and Trends
This volume of Analog Circuit Design concentrates on 3 topics: High-Speed Analog-to-Digital Converters, Mixed Signal Design and PLLs and Synthesizers. The book comprises 6 papers on each topic written by internationally recognized experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into 3 parts: Part I, High-Speed Analog-to-Digital Converters, describes the latest techniques for producing analog-to-digital converters for applications in disk drives, radio circuits, XDSL and super HiFi audio conversion. Converters having resolutions between 7-bit and 12-bit using CMOS techniques are presented. A 13-bit bandpass sigma-delta modulator for IF signal conversion concludes this part. Part II, Mixed Signal Design, presents papers that detail nearly all known techniques and design issues for mixed signal circuits using CAD tools. Applications for telecom, sigma-delta converters, systems-on-a-chip and RF circuitry are described. Part III, PLLs and Synthesizers, illustrates up-to-date techniques for combination of inductors on a CMOS chip together with PLL techniques to obtain low-noise frequency synthesizers for telecom applications. Special attention is paid to fractional N synthesizers using sigma-delta algorithms. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced design course.
High-speed, power-efficient analog integrated circuits can be used as standalone devices or to interface modern digital signal processors and micro-controllers in various applications, including multimedia, communication, instrumentation, and control systems. New architectures and low device geometry of complementary metaloxidesemiconductor (CMOS) technologies have accelerated the movement toward system on a chip design, which merges analog circuits with digital, and radio-frequency components.
This comprehensive new handbook is a one-stop engineering reference covering data converter fundamentals, techniques, and applications. Beginning with the basic theoretical elements necessary for a complete understanding of data converters, the book covers all the latest advances made in this changing field. Details are provided on the design of high-speec ADCs, high accuracy DACs and ADCs, sample-and-hold amplifiers, voltage sources and current reference,noise-shaping coding, sigma-delta converters, and much more.
Offset Reduction Techniques in High-Speed Analog-to-Digital Converters analyzes, describes the design, and presents test results of Analog-to-Digital Converters (ADCs) employing the three main high-speed architectures: flash, two-step flash and folding and interpolation. The advantages and limitations of each one are reviewed, and the techniques employed to improve their performance are discussed.