Download Free Heat Transfer And Flow Visualization Of Conventional And Swirling Impinging Jets Book in PDF and EPUB Free Download. You can read online Heat Transfer And Flow Visualization Of Conventional And Swirling Impinging Jets and write the review.

The heat transfer and analysis on laser beam, evaporator coils, shell-and-tube condenser, two phase flow, nanofluids, complex fluids, and on phase change are significant issues in a design of wide range of industrial processes and devices. This book includes 25 advanced and revised contributions, and it covers mainly (1) numerical modeling of heat transfer, (2) two phase flow, (3) nanofluids, and (4) phase change. The first section introduces numerical modeling of heat transfer on particles in binary gas-solid fluidization bed, solidification phenomena, thermal approaches to laser damage, and temperature and velocity distribution. The second section covers density wave instability phenomena, gas and spray-water quenching, spray cooling, wettability effect, liquid film thickness, and thermosyphon loop. The third section includes nanofluids for heat transfer, nanofluids in minichannels, potential and engineering strategies on nanofluids, and heat transfer at nanoscale. The forth section presents time-dependent melting and deformation processes of phase change material (PCM), thermal energy storage tanks using PCM, phase change in deep CO2 injector, and thermal storage device of solar hot water system. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.
Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.
O presente trabalho é um estudo experimental das características de um escoamento de ar em forma de jato espiralado, incidindo ortogonalmente sobre uma placa. Os objetivos do estudo são: avaliar a influência da presença de uma componente circunferencial de velocidade na distribuição dos coeficientes locais de troca de calor, obter campos de velocidade instantâneos no plano axissimétrico assim como informações sobre as características da turbulência no escoamento. Durante os experimentos se investigou a influência da distância jato/placa e da intensidade do escoamento espiralado (número de Swirl). Como etapa preliminar, foi conduzido um experimento de jato livre, para validação das técnicas de medição de velocidade utilizadas. Os resultados foram comparados com os da literartura e uma boa concordância foi obtida. A distribuição espacial dos coeficientes de troca de calor foi avaliada impondo-se um fluxo de calor constante na placa e medindo a distribuição radial de temperatura através de diversos termopares. Coeficientes locais puderam então ser estimados. Os campos de velocidades radial e axial instantâneos foram adquiridos experimentalmente através da utilização da técnica de Particle Image Velocimetry (PIV) e perfis de velocidade tangencial (média e flutuações) foram obtidos a partir da técnica Laser Doppler Velocimetry (LDV). Os resultados mostraram que os padrões de escoamento mudam significativamente quando a componente circunferencial de velocidade é introduzida. Para o valor mais alto do Número de Swirl foram verificadas fortes reversões do escoamento na região de estagnação.
This short book deals with the mathematical modeling of jets impinging porous media. It starts with a short introduction to models describing turbulences in porous media as well as turbulent heat transfer. In its main part, the book presents the heat transfer of impinging jets using a local and a non-local thermal equilibrium approach.
This book presents a significant and up-to-date review of various integrated approaches to food engineering. Distinguished food engineers and food scientists from key institutions worldwide have contributed chapters that provide a deep analysis of their particular subjects. Emerging technologies and biotechnology are introduced, and the book discusses predictive microbiology, packing materials for foods, and biodegradable films. This book is mainly directed to academics, and to undergraduate and postgraduate students in food engineering and food science and technology, who will find a selection of topics.
Flow characteristics of single jets impinging on flat surfaces have been studied by many investigators. The results of some of the numerous studies are summarized herein. Suggested methods for determining velocities and pressures on which to base heat-transfer correlations for use in impingement cooling design are presented.