Download Free Heat Pump Fundamentals Book in PDF and EPUB Free Download. You can read online Heat Pump Fundamentals and write the review.

The text describes the main features of currently available heat pumps, focusing on system operation and interactions with external heat sources. In fact, before choosing a heat pump, several aspects must be assessed in detail: the actual climate of the installation site, the building’s energy requirements, the heating system, the type of operation etc. After discussing the general working principles, the book describes the main components of compression machines – for EHPs, GHPs and CO2 heat pumps. It then addresses absorption heat pumps and provides additional details on the behavior of two-fluid mixtures. The book presents a performance comparison for the different types, helping designers choose the right one for their needs, and discusses the main refrigerants. Notes on helpful additional literature, websites and videos, also concerning relevant European regulations, round out the coverage. This book will be of interest to all engineers and technicians whose work involves heat pumps. It will also benefit students in energy engineering degree programs who want to deepen their understanding of heat pumps.
Ground-Source Heat Pumps presents the theory and some of the most recent advances of GSHPs and their implementation in the heating/cooling system of buildings. The authors explore the thermodynamic cycle with calculation, operation regimes and economic indicators and GHG emissions of a vapor compression heat pump. They go on to examine substitution strategies of non-ecological refrigerants and types of compressors and heat pumps, before delving into the different GSHP systems, as well as their compared economic, energy and environmental performances using classical and optimized adjustment for various operating modes. Surface water heat pumps and ground water heat pumps are covered, and special focus is given to both vertical and horizontal ground-coupled heat pump systems, for which modelling and simulation is discussed, and experimental systems are described. Due to its advanced approach to the subject, this book will be especially valuable for researchers, graduate students and academics, and as reference for engineers and specialists in the varied domains of building services. Explores fundamentals and state-of-the-art research, including ground-coupled heat pump (GCHP) systems. Includes performance assessment and comparison for different types of GSHP, numerical simulation models, practical applications of GSHPs with details on the renewable energy integration, information on refrigerants, and economic analysis.
Refrigeration, Air Conditioning and Heat Pumps, Fifth Edition, provides a comprehensive introduction to the principles and practice of refrigeration. Clear and comprehensive, it is suitable for both trainee and professional HVAC engineers, with a straightforward approach that also helps inexperienced readers gain a comprehensive introduction to the fundamentals of the technology. With its concise style and broad scope, the book covers most of the equipment and applications professionals will encounter. The simplicity of the descriptions helps users understand, specify, commission, use, and maintain these systems. It is a must-have text for anyone who needs thorough, foundational information on refrigeration and air conditioning, but without textbook pedagogy. It includes detailed technicalities or product-specific information. New material to this edition includes the latest developments in refrigerants and lubricants, together with updated information on compressors, heat exchangers, liquid chillers, electronic expansion valves, controls, and cold storage. In addition, efficiency, environmental impact, split systems, retail refrigeration (supermarket systems and cold rooms), industrial systems, fans, air infiltration, and noise are also included. - Full theoretical and practical treatment of current issues and trends in refrigeration and air conditioning technology - Meets the needs of industry practitioners and system designers who need a rigorous, but accessible reference to the latest developments in refrigeration and AC that is supported by coverage at a level not found in typical course textbooks - New edition features updated content on refrigerants, microchannel technology, noise, condensers, data centers, and electronic control
This volume introduces the fundamentals of adsorption heat pumps, beginning with the simplest cycle and building to the most complex. Selection of adsorbents and refrigerants, design of adsorption beds and auxiliary heat exchangers, and applications for different designs are all discussed. The book educates engineering students, engineers, and researchers about an environmentally friendly alternative to vapor compression refrigeration systems promising for many applications. The authors cover thermodynamic cycles, working materials for the cycles, and aspects of designing and modeling adsorption heat pumps. Elucidates the various applications of adsorption heat pumps; Illustrates modeling techniques for quickly screening new working materials early in their development; Provides comprehensive review of cycle types, with discussion of the applications for which they are best suited; Appropriate for graduate courses on advanced thermodynamics, design of thermal systems, sustainable energy technology, refrigeration technologies, and thermal control of electronics.
This book contains the texts of the lectures which were givenat the Nato Advanced Study Institute on Advanced Heat Pumns which was heldat Espinho, Portugal in September 1980. Aprevious NATO Advanced Study Institute on the topic of heat pumps had been held in 1975. The significance of heat pumps with respect to energy conservation was the main topic of this Institute. In 1980it was felt that considerable research had to be done in order to be able to produce more energy efficient, less costly and more widely ap~licableheat ~umos. This requires a good understanding of the functioning of the types of heat pumps available. The simultaneous coverage of the basic funda mentals of heat pumps of different drive in one lecture series therefore was the goal of the 1980 Advanced Study Institute. Only a few lectures were devoted to heat pump applications. The lectures on heat pump applications were intended to ~ive only a short overview. They were supplemented by lectures on the latest developments on vapour compression as well as sorption systems.
Amidst tightening requirements for eliminating CFC's, HCFC's, halons, and HFC's from use in air conditioning and heat pumps, the search began for replacements that are environmentally benign, non-flammable, and similar to the banned refrigerants in system-level behavior. Although refrigerant mixtures have long been used in commercial products to improve environmental impact, there are few resources available that address the use of fluid mixtures in vapor compression systems. Vapor Compression Heat Pumps with Refrigerant Mixtures provides a comprehensive background and thorough discussion of the thermodynamics of working fluid mixtures and their applications. It covers the fundamentals of various refrigeration cycles as well as a basic background in the thermodynamics related to these mixtures. It also provides important data on heat transfer and pressure drop correlations as well as critical operational issues related to refrigerant mixtures.
Fundamentals of Geothermal Heat Pump Systems: Design and Application is written for upper-level undergraduate and graduate courses in renewable energy and heat transfer. This classroom-tested text covers ground heat exchanger modeling, secondary loop ground-source system design, pumping energy, thermal response testing, commercial building applications, and horizontal and groundwater ground heat exchangers. The book is oriented to practical applications, including the economic analysis of ground source heat pump (GSHP) systems, but more theoretical sections are provided covering research-related geothermal applications. Chapters on heat transfer fundamentals and heat pump concepts are included for readers less familiar with thermal engineering concepts. A chapter covering the economic analysis of GSHP systems is also included. All of the examples and problems in the book are solved using the open-source Python programming language. The book will provide students in geothermal energy courses with a solid understanding of the subject. It will also be a valuable reference for professionals working in the field of renewable energy.
Air source heat pumps are mainly used for space heating, and have the advantages of environmental protection, energy saving, and comfort. Written by leading heat pump technology expert Hui Huang, this book summarizes the research and applications of variable volume ratio two-stage vapor compression air source heat pump technology, and its use in cold climate regions. This book can be used for reference by scientific researchers and engineers engaged in research on air source heat pump technology, product development and popularization; and by energy management and policy researchers. It will also be of value to undergraduate and graduate students studying these areas of technology.
Activities are designed to help students review content and develop critical thinking skills. A wide variety of activities is provided for various learning styles.
Significantly revised and updated since its first publication in 1996, Absorption Chillers and Heat Pumps, Second Edition discusses the fundamental physics and major applications of absorption chillers. While the popularity of absorption chillers began to dwindle in the United States in the late 1990's, a shift towards sustainability, green buildin