Download Free Handbook For Power Plant Training Book in PDF and EPUB Free Download. You can read online Handbook For Power Plant Training and write the review.

We’ve all lived through long hot summers with power shortages, brownouts, and blackouts. But at last, all the what-to-do and how-to-do it information you’ll need to handle a full range of operation and maintenance tasks at your fingertips. Written by a power industry expert, Power Generation Handbook: Selection, Applications, Operation, Maintenance helps you to gain a thorough understanding of all components, calculations, and subsystems of the various types of gas turbines, steam power plants, co-generation, and combined cycle plants. Divided into five sections, Power Generation Handbook: Selection, Applications, Operation, Maintenance provides a thorough understanding of co-generation and combined cycle plants. Each of the components such as compressors, gas and steam turbines, heat recovery steam generators, condensers, lubricating systems, transformers, and generators are covered in detail. The selection considerations, operation, maintenance and economics of co-generation plants and combined cycles as well as emission limits, monitoring and governing systems will also be covered thoroughly. This all-in-one resource gives you step-by-step guidance on how to maximize the efficiency, reliability and longevity of your power generation plant.
THE DEFINITIVE GUIDE TO SELECTING, OPERATING, AND MAINTAINING POWER PLANT EQUIPMENT Power Plant Equipment Operation and Maintenance Guide provides detailed coverage of different types of power plants such as modern co-generation, combined-cycle, and integrated gasification combined cycle (IGCC) plants. The book describes the design, selection, operation, maintenance, and economics of all these power plants. The best available power enhancement options are discussed, including duct burners, evaporative cooling, inlet-air chilling, absorption chilling, steam and water injection, and peak firing. This in-depth resource addresses the sizing, selection, calculations, operation, diagnostic testing, troubleshooting, maintenance, and refurbishment of all power plant equipment, including steam turbines, steam generators, boilers, condensers, heat exchangers, gas turbines, compressors, pumps, advanced sealing mechanisms, magnetic bearings, and advanced generators. Coverage includes: Methods for enhancing the reliability and maintainability of all power plants Economic analysis of modern co-generation and combined-cycle plants Selection of the best emission-reduction method for power plants Preventive and predictive maintenance required for power plants Gas turbine applications in power plants, protective systems, and tests
Covers the aspects of power plant design, operation, and maintenance. This title discusses cycle optimization and reliability, technical details on sizing, plant layout, fuel selection, types of drives, and performance characteristics of the major components in a cogeneration or combined cycle power plant.
The Best On-the-Job Guide to Industrial Plant Equipment and Systems This practical, one-of-a-kind field manual explains how equipment in industrial facilities operates and covers all aspects of commissioning relevant to engineers and project managers. Plant Equipment and Maintenance Engineering Handbook contains a data log of all major industrial and power plant components, describes how they function, and includes rules of thumb for operation. Hundreds of handy reference materials, such as calculations and tables, plus a comprehensive listing of electrical parts with common supplier nomenclature are also included in this time-saving resource. FEATURES DETAILED COVERAGE OF: Compressors * Air conditioning * Ash handling * Bearings and lubrication * Boilers * Chemical cleaning and Flushing * Condensers and circulating water systems * Controls * Conveyor systems * Cooling towers * Corrosion Deaerators * Diesel and gas turbines * Electrical * Fans * Fire protection * Fuels and combustion * Piping * Pumps Turbines * Vibration * Water treatment
Covers aspects of power generation from all known sources of energy that are in use around the globe. It contains power and energy sources such as solar, wind, hydro, tidal and wave power, bio energy including bio-mass and bio-fuels, waste-material, geothermal, fossil, petroleum, gas and nuclear. Experts were also invited to cover the role of nano-technology and the role of NASA in photovoltaic and wind energy in power generation.
The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Handbook of Generation IV Nuclear Reactors, Second Edition is a fully revised and updated comprehensive resource on the latest research and advances in generation IV nuclear reactor concepts. Editor Igor Pioro and his team of expert contributors have updated every chapter to reflect advances in the field since the first edition published in 2016. The book teaches the reader about available technologies, future prospects and the feasibility of each concept presented, equipping them users with a strong skillset which they can apply to their own work and research. - Provides a fully updated, revised and comprehensive handbook dedicated entirely to generation IV nuclear reactors - Includes new trends and developments since the first publication, as well as brand new case studies and appendices - Covers the latest research, developments and design information surrounding generation IV nuclear reactors
This publication addresses inspection basics, concepts and methods on how to plan inspection activities, perform inspections of safety related structures, systems and components, evaluate the safety significance of inspection findings, and document the results. It presents high level considerations for the inspection of selected programmatic areas including plant operations, radiation protection, fire protection and maintenance activities at nuclear power plants (NPPs). The publication focuses on the regulatory inspection of operating NPPs and, when applicable, describes how the same inspection techniques can be applied to facilities undergoing construction, preoperational testing, and decommissioning. The general techniques described may be also used in the inspection of other types of nuclear facilities.
Liquefied natural gas (LNG) is a commercially attractive phase of the commodity that facilitates the efficient handling and transportation of natural gas around the world. The LNG industry, using technologies proven over decades of development, continues to expand its markets, diversify its supply chains and increase its share of the global natural gas trade. The Handbook of Liquefied Natural Gas is a timely book as the industry is currently developing new large sources of supply and the technologies have evolved in recent years to enable offshore infrastructure to develop and handle resources in more remote and harsher environments. It is the only book of its kind, covering the many aspects of the LNG supply chain from liquefaction to regasification by addressing the LNG industries' fundamentals and markets, as well as detailed engineering and design principles. A unique, well-documented, and forward-thinking work, this reference book provides an ideal platform for scientists, engineers, and other professionals involved in the LNG industry to gain a better understanding of the key basic and advanced topics relevant to LNG projects in operation and/or in planning and development. - Highlights the developments in the natural gas liquefaction industries and the challenges in meeting environmental regulations - Provides guidelines in utilizing the full potential of LNG assets - Offers advices on LNG plant design and operation based on proven practices and design experience - Emphasizes technology selection and innovation with focus on a "fit-for-purpose design - Updates code and regulation, safety, and security requirements for LNG applications