Download Free Guide For Developing And Using The Fao Thiaroye Processing Technique Ftt Thiaroye Book in PDF and EPUB Free Download. You can read online Guide For Developing And Using The Fao Thiaroye Processing Technique Ftt Thiaroye and write the review.

Owing to its devices that are the ember furnace, the fat collection tray, the indirect smoke generator system and the hot air distributor, the FAO-Thiaroye processing technique (FTT-Thiaroye), focus of this methodological guide, strengthens the functions of existing improved smoking techniques in small-scale fisheries. Superior and consistent quality and safe products, with a good value for money, and meeting food safety requirements are achieved in (i) complying with technical and sanitary engineering of the facilities to harbor it, (ii) following the instructions provided herewith regarding the design, construction and use of the assembled equipment, (iii) and applying good hygienic and good manufacturing practices. Indeed, the FTT-Thiaroye has the particular merit of overcoming the challenge linked to the polycyclic aromatic hydrocarbons (PAHs) given its feature which mainstreams the relevant code of practice of the Codex Alimentarius (CAC/RCP 68-2009). It further curbs the fuel consumption while reducing the exposure of the fish processor to the smoke and heat. After a general overview of the comparative advantages of the FTT-Thiaroye, detailed information are provided to any development practitioner or any interested person or entity on the different components/devices, the supply in fuel, how to use and operate the FTT Thiaroye, and how to care and maintain it.
The FAO-Thiaroye Processing Technique (FTT) is smoking technique, popularly used in many African countries for producing smoked fish. This method was successfully introduced to fish processers in Sri Lanka and the Federated States of Micronesia (FSM) in 2016 and 2018, respectively. The introduction of the FTT across different social, cultural, environmental and economic contexts comes with the need for adaptation. This manual incorporates the construction, operation and maintenance of the original FTT to the local FSM context.
The FAO-Thiaroye Processing Technique (FTT) was introduced in Ghana in 2014 following an earlier initiative by FAO, in collaboration with the Centre National de Formation des Techniciens de Pêche et de l’Aquaculture (National Training Centre for Fisheries and Aquaculture Technicians, CNFTPA) in Senegal, to reduce post-harvest losses in small-scale fisheries and support the production of healthy fishery products. Since its introduction to Ghana, and with continuous collaboration from the Fisheries Commission of Ghana, FAO has constructed or provided assistance for the construction of FTT units for 13 fish processor groups and 15 individuals in four regions of Ghana – Greater Accra, Central, Volta, Western and Western North. A gap analysis was undertaken to understand the extent of, and the barriers to, the adoption, development, introduction and dissemination of the FTT in Ghana. The assessment combined both desk survey and field study of some traditional and FTT smoking facilities. Both qualitative and quantitative methods were used in the study. The adoption of the FTT was determined and data from field surveys was analysed using simple graphs. From the results of the cost–benefit analysis, it was deduced that the FTT is better placed and superior to the Chorkor kilns in terms of economic profitability in ensuring the well-being of both processor and consumer; and financial profitability and return on investment. With the above inferences from the findings and lessons learned from visits to some of the FTT processing facilities, key recommendations were made and it is anticipated that these will enable future investments and the adoption and wider use of the FTT by more processors.
The FAO-Thiaroye fish processing technique (FTT) was developed in 2008–2009 by the Food and Agriculture Organization (FAO) of the United Nations in collaboration with the Centre National de Formation des Techniciens des Pêches et de l’Aquaculture in Senegal. The goal in developing this technique was to solve many issues inherent to traditional fish smoking methods in terms of health, safety and the environment. After the FTT was developed in Senegal, many other countries in sub-Saharan Africa have adopted this new method, while others are considering doing so. Using Côte d’Ivoire as the benchmark country for introducing the FTT in small-scale fisheries, this study was based on the assumption that it would be risky to increase the number of these kilns without first establishing their profitability. To do this, the field study combined qualitative and quantitative methods with institutional partners in Abidjan and with fish processors at three of the four pilot FTT processing facilities (Abobo-Doumé, Braffedon and Guessabo).
"More than 60 percent of global production of smoked fishery products occurs in Africa and Asia, highlighting their tremendous significance in food and nutrition security, as well as livelihood support in these regions. However, prevailing processing technologies present critical challenges, especially in terms of safety and quality aspects, and thus there is an urgent need for the development of more efficient and safer systems. The FAO-Thiaroye fish processing technique (FTT) was developed to address these challenges by yielding products that comply with international limits on polycyclic aromatic hydrocarbons in particular, while fostering many social, economic and environmental benefits. This document examines the conditions in which improved fish smoking systems in general, and the FTT in particular, have been adopted in the context of benefits, trade-offs and policy implications in selected developing countries. In fact, experience from some African and Asian countries points to the need for a context-driven balance that ensures that the gains associated with the use of this new technique can be realized without making expensive compromises, especially in terms of fisheries resources status and trade dynamics. Policy and regulatory frameworks need to be informed by a risk-based approach and supportive of consistent benchmarking and differentiation of FTT products. This document reviews the lessons from those countries, and makes the case for a hard, evidence-based, policy backbone to safeguard the sustainable, eco-friendly supply of safe smoked (and dried) fishery products to support food security, particularly in the developing world. It aims to enlighten policy makers, fisheries planners and decision makers and any development practitioner interested in developing small-scale fisheries or promoting sustainable food systems, as well as private sector entrepreneurs who wish to implement this technology to improve their products. It provides recommendations on how best to mainstream consumers' interests while supporting sustainable livelihoods interventions in fisheries communities."--Page 4 of cover.
The SSF Guidelines recognize the right of fishers and fishworkers, acting both individually and collectively, to improve their livelihoods through value chains, post-harvest operations and trade. To achieve this, the Guidelines recommend building capacity of individuals, strengthening organizations and empowering women; reducing post-harvest losses and adding value to small-scale fisheries production; and facilitating sustainable trade and equitable market access. This document includes nine studies showcasing applied practices and successful initiatives in support of enhancing small-scale fisheries value chains, post-harvest operations and trade, based on the recommendations contained in the SSF Guidelines. Cases presented have been chosen on the basis that they can be emulated elsewhere by small-scale fishery proponents including, but not limited to, national administrations, non-governmental organizations, civil society organizations, private enterprises, development agencies and intergovernmental bodies. An analysis of enabling conditions as well as related challenges and opportunities are discussed in each case. The document supports the 2030 Agenda for Sustainable Development – specifically SDG 14.b: “provide access for small-scale artisanal fishers to marine resources and markets”; and SDG 2.3: “by 2030 double the agricultural productivity and the incomes of small-scale food producers, particularly women, indigenous peoples, family farmers, pastoralists and fishers, including through secure and equal access to land, other productive resources and inputs, knowledge, financial services, markets and opportunities for value addition and non-farm employment”.
In Africa, women are critical agents of change in the fight against rural poverty, hunger and malnutrition. They are the backbone of their households, communities, and rural economies covering important roles in food production, processing and marketing, and also in the nutrition of the family. However, with food systems rapidly modernizing and dramatic effects of climate change and environmental degradation becoming the “new normal”, they continue to face multiple challenges due to persisting gender discriminations. Over the years, remarkable political commitments to improve women’s condition and status have been made, but substantial gender gaps still remain in the access and control over productive resources and assets, services and markets. Overcoming these challenges will require addressing the root causes of gender inequalities through innovative and gender-transformative approaches. According to FAO’s latest estimates (SOFI, 2019), the number of people suffering from hunger has been rising. Just this trend - and the awareness that we lost a decade of progress - is sufficient to underscore the immense challenge of achieving the Zero Hunger target by 2030. The situation is most alarming in sub-Saharan Africa, where the number of undernourished people has steadily increased since 2014, to 237 million in 2018. These findings are in line with the 2019 SDG report. It shows that we are still lagging behind in achieving the SDGs as the global response has not been ambitious enough.
TECA is an FAO online platform for the exchange and sharing of agricultural technologies and practices for smallholder farmers and producers. The platform facilitates the transformation process in rural areas by making relevant and innovative technologies available to farmers in the field. In doing so, TECA further enhances the access to knowledge of smallholder producers in rural areas increasing their capacity to innovate and contribute to achieving the Sustainable Development Goals (SDGs). This catalogue promotes a set of successful innovations for farmers on the occasion of the FAO International Symposium on Agricultural Innovation for Family Farmers: Unlocking the potential of agricultural innovation to achieve the Sustainable Development Goals, which will be celebrated in FAO Headquarters on 2123 November 2018. The technologies presented are concrete actions that have solved specific development challenges and promote sustainable and inclusive rural transformations. The technologies and practices are designed following the FAOTECA platform standards and have been tested and refined in the field. Each practice supports smallholder farmers and those providing advisory services to agricultural producers, to identify specific needs, select the correct practices and to implement technologies adequately. Developed with the help of FAO in cooperation with the FAO Departments of Agriculture and Consumer Protection, the Department of Fisheries and Aquaculture and other key partners, the GIZ, ICRAF, IFOAM and Swisscontact, this catalogue aims at illustrating how sharing knowledge may unlock innovation throughout the farming process.
Current Developments in Biotechnology and Bioengineering: Food and Beverages Industry provides extensive coverage of new developments, state-of-the-art technologies, and potential future trends compiled from the latest ideas across the entire arena of biotechnology and bioengineering. This volume reviews current developments in the application of food biotechnology and engineering for food and beverage production. As there have been significant advances in the areas of food fermentation, processing, and beverage production, this title highlights the advances in specific transformation processes, including those used for alcoholic beverage and fermented food production. Taking a food process and engineering point-of-view, the book also aims to select important bioengineering principles, highlighting how they can be quantitatively applied in the food and beverages industry. - Contains comprehensive coverage of food and beverage production - Covers all types of fermentation processes and their application in various food products - Includes unique coverage of the biochemical processes involved in beverages production
FAO recognizes the potential of rural women and men in achieving food security and nutrition and is committed to overcoming gender inequality, in line with the pledge to “leave no one behind”, which is at the heart of the Sustainable Development Goals (SDGs) and the 2030 Agenda. The publication illustrates the consistent and sustained work of FAO towards gender equality and women’s empowerment, which are at the core of the Organization’s work to eliminate hunger and rural poverty. Each chapter h ighlights the relevance of gender work to achieving the FAO Strategic Objectives, and describes main results achieved, showcasing activities implemented at country and international levels. Stories from the field demonstrate the impact of FAO’s work for beneficiaries, highlighting successes and significant insights gained.