Download Free Grain Boundary Migration In Metals Book in PDF and EPUB Free Download. You can read online Grain Boundary Migration In Metals and write the review.

The behavior of adjacent materials at the boundary where they meet is an essential aspect of creating new engineering materials. Grain Boundary Migration in Metals is an authoritative account of the physics of grain boundary motion, written by two highly respected researchers. They provide a comprehensive overview of current knowledge regarding the migration process and how it affects microstructure evolution, focusing their treatment exclusively on the properties and behavior of grain boundaries with well defined geometry and crystallography. With their emphasis on applications-such as the characterization of microstructure and texture, recrystallization, and grain growth-the authors effectively fill the gap between the physics of grain boundary motion and its engineering practicality. The need for better microstructural design motivates permanent thrust for research in the field, and continued rapid progress appears inevitable. Grain Boundary Migration in Metals provides a solid foundation in the phenomena and serves as a valuable reference for professionals in materials science, solid state physics, and any industry engaged in metals production and the heat treatment of metals and alloys.
A major goal of materials science is to create new engineering materials and optimize their cost and performance. Understanding how adjacent materials behave at their borders is an essential part of this process. Grain boundaries are the longest-known crystal defects, but although they were discovered in the mid-eighteenth century, until quite rece
A major goal of materials science is to create new engineering materials and optimize their cost and performance. Understanding how adjacent materials behave at their borders is an essential part of this process. Grain boundaries are the longest-known crystal defects, but although they were discovered in the mid-eighteenth century, until quite rece
Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.
Diffusion in Crystalline Solids addresses some of the most active areas of research on diffusion in crystalline solids. Topics covered include measurement of tracer diffusion coefficients in solids, diffusion in silicon and germanium, atom transport in oxides of the fluorite structure, tracer diffusion in concentrated alloys, diffusion in dislocations, grain boundary diffusion mechanisms in metals, and the use of the Monte Carlo Method to simulate diffusion kinetics. This book is made up of eight chapters and begins with an introduction to the measurement of diffusion coefficients with radioisotopes. The following three chapters consider diffusion in materials of substantial technological importance such as silicon and germanium. Atomic transport in oxides of the fluorite structure is described, and diffusion in concentrated alloys, including intermetallic compounds, is analyzed. The next two chapters delve into diffusion along short-circuiting paths, focusing on the effect of diffusion down dislocations on the form of the tracer concentration profile. The book also discusses the mechanisms of diffusion in grain boundaries in metals by invoking considerable work done on grain-boundary structure. The last two chapters are concerned with computer simulation, paying particular attention to machine calculations and the Monte Carlo method. The book concludes by exploring the fundamental atomic migration process and presenting some state-of-the-art calculations for defect energies and the topology of the saddle surface. Students and researchers of material science will find this book extremely useful.
This one-of-a-kind reference examines conventional and advanced methodologies for the quantitative evaluation of properties and characterization of microstructures in metals. It presents methods for uncovering valuable information including precipitate mechanisms, kinetics, stability, crystallographic orientation, the effects of thermo-mechanical p
David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s