Download Free Gamma Scattering Density Meters Book in PDF and EPUB Free Download. You can read online Gamma Scattering Density Meters and write the review.

Collimated gamma rays from a Cs137 source were used as a means of determining the density of air (and other gases confined in an aluminum chamber) by measuring the intensity of the photons scattered by the Compton process at 90 degrees to the direction of the incident beam. The chamber was provided with thin 'windows' of beryllium, so that it was possible to study the effects of chamber wall material and thickness. It was found that (1) the count rate was always proportional to the gas density, (2) the experimental error in the net count rate (the difference between the count rate at one atmosphere pressure and the count rate at near vacuum) was 7.3% for chamber entrance and exit windows of 0.50 inch aluminum, and only 3.3% for windows of 0.25 inch beryllium, (3) the presence of the chamber provided scattering material for gamma photons, producing broad peaks at 370 keV, 182 keV, and 125 keV; using the thicker aluminum windows, the response across the entire energy spectrum was larger than in the case of the thinner beryllium windows, and (4) the presence of the chamber had no effect on the size of the sensitive volume. The technique may be used for measurements associated with jet, ramjet, and rocket engine research.
A method for direct density measurement of a gas without the use of material probes is proposed and the experimental investigation summarized. The operation of the gas density measuring instrument is based upon the interaction between a gamma-ray beam and the electrons in the gas as described by the Compton scattering principle. Experimental results indicate the practicability of this instrument for use in low density, high temperature wind tunnels and other high temperature gas flows such as rocket exhausts. (Author).