Download Free Fundamentals Of Polymer Clay Nanocomposites Book in PDF and EPUB Free Download. You can read online Fundamentals Of Polymer Clay Nanocomposites and write the review.

Written for graduate students, researchers, and practitioners, this book provides a complete introduction to the science, engineering, and commercial applications of polymer-clay nanocomposites. Starting with a discussion of general concepts, the authors define specific terms used in the field, providing newcomers with a strong foundation to the area. The physical and mechanical properties of polymer-clay nanocomposites are then described, with chapters on thermodynamics and kinetics, engineering properties, barrier properties, and flame retardancy. Mechanisms underpinning observed effects, such as UV resistance, solvent resistance, and hardness, are also explained. In-depth discussions of clay and clay surface treatment, fabrication, and characterization of nanocomposites are provided, and particular emphasis is placed on the proper use and interpretation of analytical techniques, helping readers to avoid artifacts in their own work. With commercial applications discussed throughout, and experimental results connected with theory, this is an ideal reference for those working in polymer science.
Written for graduate students, researchers, and practitioners, this book provides a complete introduction to the science, engineering, and commercial applications of polymer-clay nanocomposites. Starting with a discussion of general concepts, the authors define specific terms used in the field, providing newcomers with a strong foundation to the area. The physical and mechanical properties of polymer-clay nanocomposites are then described, with chapters on thermodynamics and kinetics, engineering properties, barrier properties, and flame retardancy. Mechanisms underpinning observed effects, such as UV resistance, solvent resistance, and hardness, are also explained. In-depth discussions of clay and clay surface treatment, fabrication, and characterization of nanocomposites are provided, and particular emphasis is placed on the proper use and interpretation of analytical techniques, helping readers to avoid artifacts in their own work. With commercial applications discussed throughout, and experimental results connected with theory, this is an ideal reference for those working in polymer science.
This book focuses on polymer-clay nanocomposite materials. It introduces readers to polymers, clays, and organo-clay and discusses the nature of interparticle interactions and physical adsorption, which are predominant in the synthesis of organo-clay; conversion of clay to organo-clay; interactions between functional groups in the interlayer region
Clay-Containing Polymer Nanocomposites covers everything from fundamental understanding to real applications of clay-containing polymer nanocomposites, including environmental considerations. The book's coverage of fundamentals and generalities, in addition to in-depth coverage of polymer layered silicate nanocomposites, make it a valuable companion for beginners in the field as well as more seasoned researchers. This book provides a rare coherent approach to this class of materials. This title is ideal for polymer and material scientists, researchers, and engineers, including under- and post-graduate students who are interested in this exciting field of research. This book will also help industrial researchers and R&D managers who want to bring advanced polymeric material based products into the market. Details crystallization behavior and kinetics to aid in applications such as injection molding Covers melt-state rheological properties, aiding understanding of the processability of materials Presents applications and market potential, supporting R&D managers who want to bring advanced polymeric material-based products into the market.
Polymer-clay nanocomposites are formed through the union of two very different materials with organic and mineral pedigrees. The hybrid compositions, however, exhibit large increases in tensile strength, modulus, and heat distortion temperature as compared with the pristine polymer. The composites also have lower water sensitivity, reduced permeability to gases, and a similar thermal coefficient of expansion. All of these property improvements can be realized without a loss of clarity in the polymer. Further, it has been found that nanocomposites impart a level of flame retardance and UV resistance not present in the pure polymer. These improvements in performance properties at relatively low clay loading (typically 2 -10wt %) have stimulated intensive research in both industry and academia over the past decade. Polymer-Clay Nanocomposites presents the first comprehensive overview of the state of the art of these materials since they were first reported a decade ago. Covering both the theory and practical applications, this volume in the 'Wiley Series in Polymer Science' covers the key aspects of these important materials including: * Polymer-clay intercalates * The preparation and general properties of special practical and commercial significance (including strength, stiffness, toughness, permeability, fire retardation and chemical stability) * The elucidation of the structural and rheological factors influencing performance and processing properties Polymer-Clay Nanocomposites is an indispensable text for polymer scientists, composites formulators, materials engineers, resin producers, filters and additive producers as well as university lecturers, and organic and inorganic chemists working in this important and fascinating area.
Discusses polymer nanocomposites composed of a family of polymeric materials whose properties are capable of being tailored to meet specific applications.
Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more