Download Free Formalisation De La Demarche De Conception Dun Systeme De Production Mobile Book in PDF and EPUB Free Download. You can read online Formalisation De La Demarche De Conception Dun Systeme De Production Mobile and write the review.

Dans cette thèse nous analysons dans quelle mesure le concept de mobilité peut être pris en compte dans la démarche d'analyse et de conception de systèmes de production. Notre apport vise à formaliser la démarche d'analyse et de conception de ce dernier, explicitant les décisions à prendre, les informations nécessaires et les critères de décision à mettre en place. Dans cet objectif, deux niveaux d'analyse ont été distingués : un niveau local concernant un site de production et un niveau global comprenant un ensemble de sites.Le premier niveau local considère un seul site de production. A ce niveau nous avons proposé une approche prenant en compte les caractéristiques du site de production. Dans notre contexte, le choix de la localisation géographique de production est imposé par le client. De ce fait, la conception du système de production doit s'adapter à cette contrainte. D'un point de vue conception, quatre questions sont abordées : (1) dans quelle mesure le concept de mobilité peut être intégré dans une démarche de conception de système de production mobile ? (2) quelles caractéristiques de l'environnement de production doivent être prises en compte ? (3) comment déterminer ce qu'il faut produire sur site ou ce qu'il serait opportun d'externaliser ? et (4) compte tenu des informations obtenues quelle est la meilleure configuration du SPM à envisager et selon quels critères de choix ? La réponse à ces questions conduit à la proposition d'une configuration du SPM adaptée pour un seul site de production.Le deuxième niveau global traite la problématique de mobilité successive multi sites. En effet, pour être rentabilisé le système de production doit être mobilisé sur plusieurs sites de production. A chaque changement de site de production, une reconfiguration du système de production s'impose en se basant sur la configuration existante (version i-1). LaThèse de Youssef BENAMAreconfigurabilité concerne d'une part l'architecture interne du système (choix des machines, recrutement de nouvelles équipes locales, etc) et d'autre part l'organisation de la chaîne d'approvisionnement du SPM (faire en interne ou externaliser, fournisseur local, etc.). A ce niveau global d'analyse, nous proposons deux modèles d'analyse : (1) un premier modèle pour l'analyse de la reconfigurabilité interne. Ce modèle d'analyse permet d'adapter le nombre de lignes de production et le nombre d'équipes en fonction d'un scénario de demande (localisations géographiques, capacité nécessaire par site). L'originalité de notre proposition consiste d'une part en l'évaluation des coûts de reconfiguration nécessaires et d'autre part l'appréciation du niveau d'adéquation de la configuration proposée avec le contexte du site de production via l'utilisation de l'indicateur de mobilité. (2) Le deuxième modèle d'analyse concerne la reconfigurabilité de la chaîne d'approvisionnement amont du SPM. Il consiste en une adaptation du modèle d'aide à la décision "faire ou faire faire" par l'intégration d'un côté de l'importance du site de production et d'un autre côté des spécificités de chaque site de production.La démarche d'analyse proposée est illustrée sur le cas industriel concernant la conception d'une usine mobile pour la fabrication et l'installation sur site de composants de centrales solaires thermodynamiques.
This book constitutes the refereed proceedings of the 18th International TRIZ Future Conference on Automated Invention for Smart Industries, held in Strasbourg, France, in October 2018 and sponsored by IFIP WG 5.4. The 27 full papers presented were carefully reviewed and selected from numerous submissions. They are organized in seven thematic sections: teaching of TRIZ; TRIZ and knowledge represenations; biomimicry; strategic company management; association between TRIZ and other methods; TRIZ and the functional approach; and the use of patent or text populations as a data source.
This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
LE SYSTEME D'EXPLOITATION DE PRODUCTION CONSTITUE L'INTERFACE ENTRE LE PROCESSUS DE PRODUCTION DANS L'ATELIER ET LE SYSTEME DE GESTION DE CETTE PRODUCTION A MOYEN ET LONG TERME. LE TRAVAIL DE RECHERCHE REALISE VISE A PROPOSER UN SYSTEME D'AIDES POUR LA CONCEPTION DE CES SYSTEMES D'EXPLOITATION DE PRODUCTION, DEDIE A L'INGENIERIE PRODUCTIQUE. CE SYSTEME COMPREND QUATRE COMPOSANTES QUE NOUS AVONS FORMALISEES: UNE DEMARCHE DE CONCEPTION PROPOSANT DIFFERENTS NIVEAUX D'ABSTRACTION ET UNE ETUDE DE LA STRUCTURE DECISIONNELLE DU SYSTEME D'EXPLOITATION; UNE BASE DE CONNAISSANCES POUR LAQUELLE NOUS AVONS DEFINI DES MODELES A DIFFERENTS NIVEAUX DE SPECIALISATION ET QUE NOUS AVONS STRUCTUREE A L'AIDE DU FORMALISME DES TYPES ABSTRAITS DE DONNEES; UNE BASE DE PROPRIETES QUI A PROPOSE QUELQUES REGLES D'ANALYSE ET DE VALIDATION DES MODELES D'OBJETS DE LA BASE DE CONNAISSANCES, A DIFFERENTS NIVEAUX DE GENERICITE ET LEUR UTILISATION AU SEIN DU PROCESSUS DE CONCEPTION. NOUS LES AVONS FORMALISEES A L'AIDE DE TECHNIQUES DE REPRESENTATION DES CONNAISSANCES EN INTELLIGENCE ARTIFICIELLE (LOGIQUE MODALE DES PREDICATS, OBJETS STRUCTURES, REGLES CONDITION ACTION); UNE BASE DE PROJECTION QUI CONSTITUE L'INTERFACE GRAPHIQUE PERMETTANT LA COMMUNICATION AU SEIN DE L'ACTIVITE DE CONCEPTION. NOUS AVONS FAIT LE CHOIX ICI DE REPRENDRE DES FORMALISMES EXISTANTS DONT NOUS ASSURONS SIMPLEMENT LA COHERENCE
This textbook presents the core of recent advances in design theory and its implications for design methods and design organization. Providing a unified perspective on different design methods and approaches, from the most classic (systematic design) to the most advanced (C-K theory), it offers a unique and integrated presentation of traditional and contemporary theories in the field. Examining the principles of each theory, this guide utilizes numerous real life industrial applications, with clear links to engineering design, industrial design, management, economics, psychology and creativity. Containing a section of exams with detailed answers, it is useful for courses in design theory, engineering design and advanced innovation management. "Students and professors, practitioners and researchers in diverse disciplines, interested in design, will find in this book a rich and vital source for studying fundamental design methods and tools as well as the most advanced design theories that work in practice". Professor Yoram Reich, Tel Aviv University, Editor-in-Chief, Research In Engineering Design. "Twenty years of research in design theory and engineering have shown that training in creative design is indeed possible and offers remarkably operational methods - this book is indispensable for all leaders and practitioners who wish to strengthen theinnovation capacity of their company." Pascal Daloz, Executive Vice President, Dassault Systèmes
Through a number of case studies from the West African Sahel, this book links and explores natural resources management from the perspectives of politics, property and production.
Reliability-based design is the only engineering methodology currently available which can ensure self-consistency in both physical and probabilistic terms. It is also uniquely compatible with the theoretical basis underlying other disciplines such as structural design. It is especially relevant as geotechnical design becomes subject to incre
The history of documentary has been one of adaptation and change, as docu-mentarists have harnessed the affordances of emerging technology. In the last decade interactive documentaries (i-docs) have become established as a new field of practice within non-fiction storytelling. Their various incarnations are now a focus at leading film festivals (IDFA DocLab, Tribeca Storyscapes, Sheffield DocFest), major international awards have been won, and they are increasingly the subject of academic study. This anthology looks at the creative practices, purposes and ethics that lie behind these emergent forms. Expert contributions, case studies and interviews with major figures in the field address the production processes that lie behind interactive documentary, as well as the political, cultural and geographic contexts in which they are emerging and the media ecology that supports them. Taking a broad view of interactive documentary as any work which engages with 'the real' by employing digital interactive technology, this volume addresses a range of platforms and environments, from web-docs and virtual reality to mobile media and live performance. It thus explores the challenges that face interactive documentary practitioners and scholars, and proposes new ways of producing and engaging with interactive factual content.
"Building accurate geodatabases is the foundation for meaningful and reliable GIS. By documenting actual case studies of successful ArcGIS implementations, Designing Geodatabases makes it easier to envision your own database plan."--Jacket.