Download Free Films On Solid Surfaces Book in PDF and EPUB Free Download. You can read online Films On Solid Surfaces and write the review.

Films on Solid Surfaces presents the physics and chemistry of physical adsorption. This book contains 10 chapters that are ordered according to the flow of a course given in a graduate study in University of Washington during 1973. The introductory chapter presents the motivation for the completion of the book. As the motivating factors are established, the book follows with the topic on atomic nature of physical adsorption and the states of single adsorbed atoms. A review of experimental techniques for the study of solid surfaces and films is given, as well as a discussion of substrate preparation and equilibrium thermodynamics. The various states of films and their phase transitions encompass four chapters. Lastly, the book also reviews thin film superfluidity. This book specifically caters to scientists in the fields of physics and biology working on physical adsorption and surface science.
This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. Compa- red to the earlier editions, which bore the title "Surfaces and Interfaces of Solid Materials", the book now places more emphasis on thin films, including also their superconducting and ferromagnetic properties. The present 4th edition thus presents techniques of preparing well-defined solid surfaces and interfaces, fundamental aspects of adsorption and layer growth, as well as basic models for the descripti- on of structural, vibronic and electronic properties of sur- faces, interfaces and thin films. Because of their importan- ce for modern information technology, significant attention is paid to the electronic properties of semiconductor inter- faces and heterostructures. Collective phenomena , such as superconductivity and ferromagnetism, also feature promi- nently. Experimental sections covering essential measurement and preparation techniques are presented in separate panels.
Surfaces and Interfaces of Solid Materials emphasises both experimental and theoretical aspects of surface and interface physics. Beside the techniques of preparing well-defined solid surfaces and interfaces basic models for the description of structural, vibronic and electronic properties of interfaces are described, as well as fundamental aspects of adsorption and layer growth. Because of its importance for modern microelectronics special emphasis is placed on the electronic properties of semiconductor interfaces and heterostructures. Experimental topics covering the basics of ultrahigh-vacuum technology, electron optics, surface spectroscopies and electrical interface characterization techniques are presented in the form of separate panels.
The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.
This book is a treatise on the thermodynamic and dynamic properties of thin liquid films at solid surfaces and, in particular, their rupture instabilities. For the quantitative study of these phenomena, polymer thin films (sometimes referred to as “ultrathin”) have proven to be an invaluable experimental model system. What is it that makes thin film instabilities special and interesting? First, thin polymeric films have an important range of applications. An understanding of their instabilities is therefore of practical relevance for the design of such films. The first chapter of the book intends to give a snapshot of current applications, and an outlook on promising future ones. Second, thin liquid films are an interdisciplinary research topic, which leads to a fairly heterogeneous community working on the topic. It justifies attempting to write a text which gives a coherent presentation of the field which researchers across their specialized communities might be interested in. Finally, thin liquid films are an interesting laboratory for a theorist to confront a well-established theory, hydrodynamics, with its limits. Thin films are therefore a field in which a highly fruitful exchange and collaboration exists between experimentalists and theorists. The book stretches from the more concrete to more abstract levels of study: we roughly progress from applications via theory and experiment to rigorous mathematical theory. For an experimental scientist, the book should serve as a reference and guide to what is the current consensus of the theoretical underpinnings of the field of thin film dynamics. Controversial problems on which such a consensus has not yet been reached are clearly indicated in the text, as well as discussed in a final chapter. From a theoretical point of view, the field of dewetting has mainly been treated in a mathematically ‘light’ yet elegant fashion, often making use of scaling arguments. For the untrained researcher, this approach is not always easy to follow. The present book attempts to bridge between the ‘light’ and the ‘rigorous’, always with the ambition to enhance insight and understanding - and to not let go the elegance of the theory.
The book is devoted to the consideration of the different processes taking place in thin films and at surfaces. Since the most important physico-chemical phenomena in such media are accompanied by the rearrangement of an intra- and intermolecular coordinates and consequently a surrounding molecular ensemble, the theory of radiationless multi-vibrational transitions is used for its description. The second part of the book considers the numerous surface phenomena. And in the third part is described the preparation methods and characteristics of different types of thin films. Both experimental and theoretical descriptions are represented. Media rearrangement coupled with the reagent transformation largely determines the absolute value and temperature dependence of the rate constants and other characteristics of the considered processes. These effects are described at the atomic or molecular level based on the multi-phonon theory, starting from the first pioneering studies through to contemporary studies.A number of questions are included at the end of many chapters to further reinforce the material presented.· Unified approach to the description of numerous physico-chemical phenomena in different materials· Based on the pioneering research work of the authors· Explantion of a variety of experimental observations· Material is presented at two levels of complexity for specialists and non-specialists · Identifies existing and potential applications of the processes and phenomena · Includes questions at the end of some chapters to further reinforce the material discussed
Principles of Adsorption and Reaction on Solid Surfaces As with other books in the field, Principles of Adsorption and Reaction on Solid Surfaces describes what occurs when gases come in contact with various solid surfaces. But, unlike all the others, it also explains why. While the theory of surface reactions is still under active development, the approach Dr. Richard Masel takes in this book is to outline general principles derived from thermodynamics and reaction rate theory that can be applied to reactions on surfaces, and to indicate ways in which these principles may be applied. The book also provides a comprehensive treatment of the latest quantitative surface modeling techniques with numerous examples of their use in the fields of chemical engineering, physical chemistry, and materials science. A valuable working resource and an excellent graduate-level text, Principles of Adsorption and Reaction on Solid Surfaces provides readers with: * A detailed look at the latest advances in understanding and quantifying reactions on surfaces * In-depth reviews of all crucial background material * 40 solved examples illustrating how the methods apply to catalysis, physical vapor deposition, chemical vapor deposition, electrochemistry, and more * 340 problems and practice exercises * Sample computer programs * Universal plots of many key quantities * Detailed, class-tested derivations to help clarify key results The recent development of quantitative techniques for modeling surface reactions has led to a number of exciting breakthroughs in our understanding of what happens when gases come in contact with solid surfaces. While many books have appeared describing various experimental modeling techniques and the results obtained through their application, until now, there has been no single-volume reference devoted to the fundamental principles governing the processes observed. The first book to focus on governing principles rather than experimental techniques or specific results, Principles of Adsorption and Reaction on Solid Surfaces provides students and professionals with a quantitative treatment of the application of principles derived from the fields of thermodynamics and reaction rate theory to the investigation of gas adsorption and reaction on solid surfaces. Writing for a broad-based audience including, among others, chemical engineers, chemists, and materials scientists, Dr. Richard I. Masel deftly balances basic background in areas such as statistical mechanics and kinetics with more advanced applications in specialized areas. Principles of Adsorption and Reaction on Solid Surfaces was also designed to provide readers an opportunity to quickly familiarize themselves with all of the important quantitative surface modeling techniques now in use. To that end, the author has included all of the key equations involved as well as numerous real-world illustrations and solved examples that help to illustrate how the equations can be applied. He has also provided computer programs along with universal plots that make it easy for readers to apply results to their own problems with little computational effort. Principles of Adsorption and Reaction on Solid Surfaces is a valuable working resource for chemical engineers, physical chemists, and materials scientists, and an excellent text for graduate students in those disciplines.
The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. - Provides a broad overview on modern coating and thin film deposition techniques, and their applications - Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films - Each chapter includes experimental results illustrating various models, mechanisms or theories
This book covers the experimental and theoretical understanding of surface and thin film processes. It presents a unique description of surface processes in adsorption and crystal growth, including bonding in metals and semiconductors. Emphasis is placed on the strong link between science and technology in the description of, and research for, new devices based on thin film and surface science. Practical experimental design, sample preparation and analytical techniques are covered, including detailed discussions of Auger electron spectroscopy and microscopy. Thermodynamic and kinetic models of structure are emphasised throughout. The book provides extensive leads into practical and research literature, as well as resources on the World Wide Web (see http://venables.asu.edu/book). Each chapter contains problems which aim to develop awareness of the subject and the methods used. Aimed as a graduate textbook, this book will also be useful as a sourcebook for graduate students, researchers and practitioners in physics, chemistry, materials science and engineering.
The Advanced Study Institute on Phase Transitions in Surface Films was held at the Ettore Majorana Centre for Scientific Cul ture in Erice, Sicily, during June 11 to June 25, 1979. This Institute was the second course of the International School of Low Temperature Physics which was established at the Centre in 1977, with the guidance and inspiration of T. Regge and A. Zichichi. The 1979 course selected a topic on one of the most rapidly advancing fields of condensed matter physics in the late 70's. The program of topics and speakers was developed with the advice of the Organizing Committee, composed of J. Friedel, N. D. Mermin, R. E. Peierls, T. Regge and J. Wheatley. These two weeks were memorable for the range and depth of the lectures and seminars, and the sustained high interest of the students and faculty through a damanding schedule of over 5 hours a day of formal sessions. A large fraction of the leading researchers in the field were there. It would have been impossible to gather such a large group five years earlier, for the field itself is hardly 10 years old. Although the foundations of the thermodynamics of surface films were laid down by Gibbs about 100 years ago, and experiments on oil/water monolayers were carried out by Pockels and Rayleigh at about the same time, the beginnings of the modern field were much more recent.