Download Free Federal Aviation Administrations Approach For Determining Future Air Traffic Controller Staffing Needs Book in PDF and EPUB Free Download. You can read online Federal Aviation Administrations Approach For Determining Future Air Traffic Controller Staffing Needs and write the review.

"TRB Special Report 314, The Federal Aviation Administration's Approach for Determining Future Air Traffic Controller Staffing Needs, examines the methods used by the Federal Aviation Administration (FAA) to estimate how many controllers are needed to staff its air traffic control facilities and FAA's processes for using these estimates to properly distribute controllers across facilities. According to the report, FAA's models for determining air traffic controller staffing needs are suitable for developing initial estimates of the number of controllers required at terminal areas and airport towers, but the models used for the centers controlling aircraft en route between airports can be improved. In addition, as a matter of priority, the FAA should collaborate with the National Air Traffic Controllers Association to develop and implement an enhanced tool for all facilities that is capable of creating efficient controller work schedules that incorporate fatigue mitigation strategies. The report recommends that the FAA analyze a wide range of data, such as accident and incident reports and voluntary reports by controllers, to identify relationships between staffing and safety. In addition, the controller workforce should be involved in staffing decisions, particularly as knowledge emerges about relevant safety issues. The report also says that FAA should ensure that staffing continue to be appropriate as FAA implements the new air traffic operations environment associated with the Next Generation Transportation System, a modernization initiative to shift air traffic management from ground-based radar to a satellite system"--Provided by publisher.
"TRB Special Report 314, The Federal Aviation Administration's Approach for Determining Future Air Traffic Controller Staffing Needs, examines the methods used by the Federal Aviation Administration (FAA) to estimate how many controllers are needed to staff its air traffic control facilities and FAA's processes for using these estimates to properly distribute controllers across facilities. According to the report, FAA's models for determining air traffic controller staffing needs are suitable for developing initial estimates of the number of controllers required at terminal areas and airport towers, but the models used for the centers controlling aircraft en route between airports can be improved. In addition, as a matter of priority, the FAA should collaborate with the National Air Traffic Controllers Association to develop and implement an enhanced tool for all facilities that is capable of creating efficient controller work schedules that incorporate fatigue mitigation strategies. The report recommends that the FAA analyze a wide range of data, such as accident and incident reports and voluntary reports by controllers, to identify relationships between staffing and safety. In addition, the controller workforce should be involved in staffing decisions, particularly as knowledge emerges about relevant safety issues. The report also says that FAA should ensure that staffing continue to be appropriate as FAA implements the new air traffic operations environment associated with the Next Generation Transportation System, a modernization initiative to shift air traffic management from ground-based radar to a satellite system"--Provided by publisher.
TRB has released the final version of Special Report 314: The Federal Aviation Administration’s Approach for Determining Future Air Traffic Controller Staffing Needs that examines the methods used by the Federal Aviation Administration (FAA) to estimate how many controllers are needed to staff its air traffic control facilities and its processes for using these estimates to properly distribute controllers across facilities. According to the report, the FAA’s models for determining air traffic controller staffing needs are suitable for developing initial estimates of the number of controllers required at terminal areas and airport towers, but the models used for the centers controlling aircraft en route between airports can be improved. In addition, as a matter of priority, the FAA should collaborate with the National Air Traffic Controllers Association to develop and implement an enhanced tool for all facilities that is capable of creating efficient controller work schedules that incorporate fatigue mitigation strategies. The report recommends that the FAA analyze a wide range of data, such as accident and incident reports and voluntary reports by controllers, to identify relationships between staffing and safety. In addition, the controller workforce should be involved in staffing decisions, particularly as knowledge emerges about relevant safety issues. The FAA also should ensure that staffing continues to be appropriate as it implements the new air traffic operations environment associated with the Next Generation Transportation System, a modernization initiative to shift air traffic management from ground-based radar to a satellite system, the report says. A press release on the report is available for download. A report summary has been published in TR News 297.
Within the Federal Aviation Administration (FAA), the Airway Transportation System Specialists ATSS) maintain and certify the equipment in the National Airspace System (NAS).In fiscal year 2012, Technical Operations had a budget of $1.7B. Thus, Technical Operations includes approximately 19 percent of the total FAA employees and less than 12 percent of the $15.9 billion total FAA budget. Technical Operations comprises ATSS workers at five different types of Air Traffic Control (ATC) facilities: (1) Air Route Traffic Control Centers, also known as En Route Centers, track aircraft once they travel beyond the terminal airspace and reach cruising altitude; they include Service Operations Centers that coordinate work and monitor equipment. (2) Terminal Radar Approach Control (TRACON) facilities control air traffic as aircraft ascend from and descend to airports, generally covering a radius of about 40 miles around the primary airport; a TRACON facility also includes a Service Operations Center. (3) Core Airports, also called Operational Evolution Partnership airports, are the nation's busiest airports. (4) The General National Airspace System (GNAS) includes the facilities located outside the larger airport locations, including rural airports and equipment not based at any airport. (5) Operations Control Centers are the facilities that coordinate maintenance work and monitor equipment for a Service Area in the United States. At each facility, the ATSS execute both tasks that are scheduled and predictable and tasks that are stochastic and unpredictable in. These tasks are common across the five ATSS disciplines: (1) Communications, maintaining the systems that allow air traffic controllers and pilots to be in contact throughout the flight; (2) Surveillance and Radar, maintaining the systems that allow air traffic controllers to see the specific locations of all the aircraft in the airspace they are monitoring; (3) Automation, maintaining the systems that allow air traffic controllers to track each aircraft's current and future position, speed, and altitude; (4) Navigation, maintaining the systems that allow pilots to take off, maintain their course, approach, and land their aircraft; and (5) Environmental, maintaining the power, lighting, and heating/air conditioning systems at the ATC facilities. Because the NAS needs to be available and reliable all the time, each of the different equipment systems includes redundancy so an outage can be fixed without disrupting the NAS. Assessment of Staffing Needs of Systems Specialists in Aviation reviews the available information on: (A) the duties of employees in job series 2101 (Airways Transportation Systems Specialist) in the Technical Operations service unit; (B) the Professional Aviation Safety Specialists (PASS) union of the AFL-CIO; (C) the present-day staffing models employed by the FAA; (D) any materials already produced by the FAA including a recent gap analysis on staffing requirements; (E) current research on best staffing models for safety; and (F) non-US staffing standards for employees in similar roles.
Reviews the methodologies by which Federal Aviation Administration (FAA) estimates and applies its staffing standards, examines the feasibility and cost of modifying agency staffing standards and developing alternative approaches for application to individual facilities, and recommends an improvement strategy.
Within the Federal Aviation Administration (FAA), the Airway Transportation System Specialists ATSS) maintain and certify the equipment in the National Airspace System (NAS).In fiscal year 2012, Technical Operations had a budget of $1.7B. Thus, Technical Operations includes approximately 19 percent of the total FAA employees and less than 12 percent of the $15.9 billion total FAA budget. Technical Operations comprises ATSS workers at five different types of Air Traffic Control (ATC) facilities: (1) Air Route Traffic Control Centers, also known as En Route Centers, track aircraft once they travel beyond the terminal airspace and reach cruising altitude; they include Service Operations Centers that coordinate work and monitor equipment. (2) Terminal Radar Approach Control (TRACON) facilities control air traffic as aircraft ascend from and descend to airports, generally covering a radius of about 40 miles around the primary airport; a TRACON facility also includes a Service Operations Center. (3) Core Airports, also called Operational Evolution Partnership airports, are the nation's busiest airports. (4) The General National Airspace System (GNAS) includes the facilities located outside the larger airport locations, including rural airports and equipment not based at any airport. (5) Operations Control Centers are the facilities that coordinate maintenance work and monitor equipment for a Service Area in the United States. At each facility, the ATSS execute both tasks that are scheduled and predictable and tasks that are stochastic and unpredictable in. These tasks are common across the five ATSS disciplines: (1) Communications, maintaining the systems that allow air traffic controllers and pilots to be in contact throughout the flight; (2) Surveillance and Radar, maintaining the systems that allow air traffic controllers to see the specific locations of all the aircraft in the airspace they are monitoring; (3) Automation, maintaining the systems that allow air traffic controllers to track each aircraft's current and future position, speed, and altitude; (4) Navigation, maintaining the systems that allow pilots to take off, maintain their course, approach, and land their aircraft; and (5) Environmental, maintaining the power, lighting, and heating/air conditioning systems at the ATC facilities. Because the NAS needs to be available and reliable all the time, each of the different equipment systems includes redundancy so an outage can be fixed without disrupting the NAS. Assessment of Staffing Needs of Systems Specialists in Aviation reviews the available information on: (A) the duties of employees in job series 2101 (Airways Transportation Systems Specialist) in the Technical Operations service unit; (B) the Professional Aviation Safety Specialists (PASS) union of the AFL-CIO; (C) the present-day staffing models employed by the FAA; (D) any materials already produced by the FAA including a recent gap analysis on staffing requirements; (E) current research on best staffing models for safety; and (F) non-US staffing standards for employees in similar roles.