Download Free Fabrication And Characterization Of A Silicon Nanowire Based Schottky Barrier Field Effect Transistor Platform For Functional Electronics And Biosensor Applications Book in PDF and EPUB Free Download. You can read online Fabrication And Characterization Of A Silicon Nanowire Based Schottky Barrier Field Effect Transistor Platform For Functional Electronics And Biosensor Applications and write the review.

This book gathers the latest advances, innovations, and applications in the field of sensing technology, as presented by international researchers and engineers at the 15th International Conference on Sensing Technology (ICST), held in Sydney, Australia on December 5–7, 2022. Contributions include a wide range of topics such as: vision sensing, sensor signal processing, sensors phenomena and modelling, sensor characterization, smart sensors and sensor fusion, electromagnetic, chemical and physical sensors, electronic nose technology, biosensors, nano sensors, wireless sensors and WSN, Internet of Things, optical sensors, sensor arrays, intelligent sensing, Internet-based and remote data acquisition. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband spread spectrum transmitter, a neuron cell and a Field Programmable Gate Array (FPGA) platform in the digital domain, as well as high bandwidth single-stage and operational amplifiers, RF communication circuits in the analog domain, in order to show this technology’s true potential for the next generation VLSI.
Quasi one-dimensional (1-D) field-effect transistors (FET), such as Si nanowire FETs (Si NW-FETs), have shown promise for more aggressive channel length scaling, better electrostatic gate control, higher integration densities and low-power applications. At the same time, an accurate bench-marking of their performance remains a challenging task due to difficulties in definition of the exact channel length, gate capacitance and transconductance. In 1-D Si FETs, one also often observes a significant degradation of their mobility and on/off ratio. The goal of this study is to implement the idea of the FET performance enhancement while simultaneously performing a more rigorous data extraction. To achieve these goals, we fabricated dual-gate undoped Si NW-FETs with various NW diameters The Si NWs are grown by Au-catalyzed vapor-transport For our top-gate NW-FET, the subthreshold swing was determined to be 85-90 mV/decade, whereas the best subthreshold swings for Si NW-FETs until now were ~135-140 mV/decade. We achieved a ON/OFF current ratio of 10 7 due to improved electrostatic control and electron transport conditions inside the channel. This is on the higher end of any ON/OFF ratios thus far reported for NW FETs The hole mobility in our NW-FETs was around 250.400 cm[superscript 2] /Vs, according to different extraction procedures. In our mobility calculations we included the NW silicidation effect, which reduces the effective channel length. We calculated the top gate capacitance using Technology Computer Aided Design (TCAD) Sentaurus simulator, which gives more accurate value of capacitance of the NW over any analytical formulas. Thus we fabricate and rigorously study Si NW.s intrinsic properties which are very important for digital logic circuit application. In the second part of the study, we carried out simulation of Si NW FET devices to shed light on the carrier transport behavior that also explains experimental data.
In recent years, research on microelectronics has been specifically focused on the proposition of efficient alternative methodologies and materials to fabricate feasible integrated circuits. This book provides a general background of thin film transistors and their simulations and constructions. The contents of the book are broadly classified into two topics: design and simulation of FETs and construction of FETs. All the authors anticipate that the provided chapters will act as a single source of reference for the design, simulation and construction of FETs. This edited book will help microelectronics researchers with their endeavors and would be a great addition to the realm of semiconductor physics.