Download Free Experimental Investigation Of Condensation On Mechanically Treated And Superhydrophobic Coated Surfaces Book in PDF and EPUB Free Download. You can read online Experimental Investigation Of Condensation On Mechanically Treated And Superhydrophobic Coated Surfaces and write the review.

During the past decade, the superhydrophobic surfaces, bio-inspired non-wettable surfaces, have aroused worldwide interest. The super water-repellant surface has special characteristics such as low surface energy as well as hierarchical micro/nano surface roughness. These surfaces have many practical applications, from industrial to biomedical applications, including water/oil separation, self-cleaning, drag reduction, anti-fogging, anti-bacterial, anti-fouling, anti-icing, corrosion resistance, as well as many applications in industries such as marine, oil, and gas, aerospace, biomedicine etc. This book presents knowledge on the field of application of superhydrophobic surfaces. Superhydrophobicity has become a hot topic in the academics as well as industries in different engineering and biomedicine research fields.
With its uncommon presentation of instructional material regarding mathematical modeling, measurements, and solution of inverse problems, Thermal Measurements and Inverse Techniques is a one-stop reference for those dealing with various aspects of heat transfer. Progress in mathematical modeling of complex industrial and environmental systems has e
This unique book presents ways to mitigate the disastrous effects of snow/ice accumulation and discusses the mechanisms of new coatings deicing technologies. The strategies currently used to combat ice accumulation problems involve chemical, mechanical or electrical approaches. These are expensive and labor intensive, and the use of chemicals raises serious environmental concerns. The availability of truly icephobic surfaces or coatings will be a big boon in preventing the devastating effects of ice accumulation. Currently, there is tremendous interest in harnessing nanotechnology in rendering surfaces icephobic or in devising icephobic surface materials and coatings, and all signals indicate that such interest will continue unabated in the future. As the key issue regarding icephobic materials or coatings is their durability, much effort is being spent in developing surface materials or coatings which can be effective over a long period. With the tremendous activity in this arena, there is strong hope that in the not too distant future, durable surface materials or coatings will come to fruition. This book contains 20 chapters by subject matter experts and is divided into three parts— Part 1: Fundamentals of Ice Formation and Characterization; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered include: factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; icephobicities of superhydrophobic surfaces; anti-icing using microstructured surfaces; icephobic surfaces: features and challenges; bio-inspired anti-icing surface materials; durability of anti-icing coatings; durability of icephobic coatings; bio-inspired icephobic coatings; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.
This book presents the proceedings of CIRATM-9. The papers present the latest scientific concepts and technological developments in textile and materials of worldwide researchers and practitioners. The conference promotes sharing ideas and emerging technologies and fosters research and development collaborations amongst academia, research institutions and relevant industries. CIRATM is the first international conference applied on textiles in Tunisia and all Maghreb. It is a regular conference organized every two year since 2004. It focuses on all textile and materials fields. It joints together all actors of textile field and share research with many international collaborators. This edition is organized with the collaboration of 4 Tunisian partners and 6 international associates and institutions · Laboratory of Textile Engineering (LGTex, Tunisia), · Monastir university (Tunisia) · Tunisian Association of Textile Researchers (ATCTex, Tunisia) · Le pôle de compétitivité Monastir-El Fejja (mfcpole, Tunisia) · Association of the universities for textiles (AUTEX, International) · Balkan Society of textile engineering (BASTE) · National research & development institute for textile and leather (INCDTP, Bucharest- Romania) · Yazid University (Iran) · Centre d'Essais Textile (Cetelor, Lorraine - France) · Center of Textile Science and Technology (2C2T – University of Minho, Portugal)
The book focuses on new analytical, experimental, and computational developments in the field of research of heat and mass transfer phenomena. The generation, conversion, use, and exchange of thermal energy between physical systems are considered. Various mechanisms of heat transfer such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes are presented. Theory and fundamental research in heat and mass transfer, numerical simulations and algorithms, experimental techniques, and measurements as they applied to all kinds of applied and emerging problems are covered.
Surface sciences elucidate the physical and chemical aspects of the surfaces and interfaces of materials. Of great interest in this field are nanomaterials, which have recently experienced breakthroughs in synthesis and application. As such, this book presents some recent representative achievements in the field of surface science, including synthesis techniques, surface modifications, nanoparticle-based smart coatings, wettability of different surfaces, physics/chemistry characterizations, and growth kinetics of thin films. In addition, the book illustrates some of the important applications related to silicon, CVD graphene, graphene oxide, transition metal dichalcogenides, carbon nanotubes, carbon nanoparticles, transparent conducting oxide, and metal oxides.
This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.
This book is open access under a CC BY 4.0 license.This book presents results relevant in the manufacturing research field, that are mainly aimed at closing the gap between the academic investigation and the industrial application, in collaboration with manufacturing companies. Several hardware and software prototypes represent the key outcome of the scientific contributions that can be grouped into five main areas, representing different perspectives of the factory domain:1) Evolutionary and reconfigurable factories to cope with dynamic production contexts characterized by evolving demand and technologies, products and processes.2) Factories for sustainable production, asking for energy efficiency, low environmental impact products and processes, new de-production logics, sustainable logistics.3) Factories for the People who need new kinds of interactions between production processes, machines, and human beings to offer a more comfortable and stimulating working environment.4) Factories for customized products that will be more and more tailored to the final user’s needs and sold at cost-effective prices.5) High performance factories to yield the due production while minimizing the inefficiencies caused by failures, management problems, maintenance.This books is primarily targeted to academic researchers and industrial practitioners in the manufacturing domain.