Download Free Estudio De Los Efectos De Segundo Orden En Edificios De Gran Altura Con Estructura De Hormigon Armado Book in PDF and EPUB Free Download. You can read online Estudio De Los Efectos De Segundo Orden En Edificios De Gran Altura Con Estructura De Hormigon Armado and write the review.

Esta tesis propone una metodología de evaluación del daño sísmico basada en el método del espectro de capacidad pero con un enfoque probabilista que se apoya en simulaciones Monte Carlo. Así la acción sísmica, la estructura y el daño esperado se consideran y se analizan como variables aleatorias. La metodología, que se valida mediante el análisis dinámico incremental, es una nueva, robusta y potente herramienta de análisis de riesgo tanto a nivel de edificios individuales como a nivel urbano y regional. La validación mediante el análisis dinámico, de hecho, ha supuesto crear también una metodología probabilista basada en el análisis dinámico incremental. El daño esperado puede obtenerse para cualquier intervalo de confianza permitiendo así, a los gestores de la protección civil la elección de los niveles prioritarios o de interés. Como el análisis dinámico incremental requiere acelerogramas, se ha optado por usar registros de terremotos y se ha diseñado una técnica que, para una determinada base de datos, permite optimizar, minimizando la dispersión, el número de acelerogramas compatibles con un determinado espectro de respuesta; de esta forma la incertidumbre en la acción sísmica se considera de una manera adecuada. Aunque a efectos metodológicos, se ha estimado suficiente y adecuado considerar como variables aleatorias gaussianas sólo las propiedades resistentes del hormigón y el acero, con todo se ha introducido también una nueva e interesante forma de incorporar la variabilidad espacial de la resistencia de vigas y columnas. Los desarrollos metodológicos se ilustran con numerosos casos de estudio de edificios existentes y bien documentados. En particular, se han estudiado los edificios de hormigón armado con forjados reticulares, clasificados en altos, de altura mediana y bajos. Este estudio se ha realizado considerando acciones sísmicas compatibles con los espectros previstos en el eurocódigo EC8 para terremotos tipo 1 y tipo 2 y para suelos A, B, C, D y E. La aplicación del método a edificios irregulares ha confirmado la insuficiencia de modelos 2D en estructuras asimétricas. Así, el método probabilista se ha aplicado a dos edificios de especial importancia para escenarios sísmicos de interés. El primero es el hospital de Vielha, para la acción sísmica con un periodo de retorno de 475 años; el segundo es un edificio del Barrio de San Fernando en Lorca, que fue severamente dañado por el terremoto del mes de mayo de 2011. En este segundo caso la acción sísmica se ha definido de forma determinista mediante las dos componentes horizontales de aceleración registradas en la ciudad. En los análisis 3D se ha incorporado el efecto de direccionalidad, concluyendo que edificios del mismo tipo situados en un mismo lugar pueden sufrir daños significativamente distintos dependiendo sólo de su orientación azimutal. Los resultados obtenidos en el caso de Lorca son compatibles con los daños observados lo que contribuye a validar el método probabilista y los desarrollos implementados en esta tesis.
Proyecto y cálculo de estructuras/J.Calavera.V.2.
The Cal/OSHA Pocket Guide for the Construction Industry is a handy guide for workers, employers, supervisors, and safety personnel. This latest 2011 edition is a quick field reference that summarizes selected safety standards from the California Code of Regulations. The major subject headings are alphabetized and cross-referenced within the text, and it has a detailed index. Spiral bound, 8.5 x 5.5"
On October 14-19, 1990, the 6th International Conference on the Conservation of Earthen Architecture was held in Las Cruces, New Mexico. Sponsored by the GCI, the Museum of New Mexico State Monuments, ICCROM, CRATerre-EAG, and the National Park Service, under the aegis of US/ICOMOS, the event was organized to promote the exchange of ideas, techniques, and research findings on the conservation of earthen architecture. Presentations at the conference covered a diversity of subjects, including the historic traditions of earthen architecture, conservation and restoration, site preservation, studies in consolidation and seismic mitigation, and examinations of moisture problems, clay chemistry, and microstructures. In discussions that focused on the future, the application of modern technologies and materials to site conservation was urged, as was using scientific knowledge of existing structures in the creation of new, low-cost, earthen architecture housing.
In December 1996, the then CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. The Task Group consists of about 60 members, representing most European universities, research institutes and industrial companies working in the field of advanced composite reinforcement for concrete structures, as well as corresponding members from Canada, Japan and USA. Meetings are held twice a year and on the research level its work is supported by the EU TMR (European Union Training and Mobility of Researchers) Network "ConFibreCrete”. The work of fib TG 9.3 is performed by five working parties (WP): Material Testing and Characterization (MT&C) Reinforced Concrete (RC) Prestressed Concrete (PC) Externally Bonded Reinforcement (EBR) Marketing and Applications (M&A) This technical report constitutes the work conducted as of to date by the EBR party. This bulletin gives detailed design guidelines on the use of FRP EBR, the practical execution and the quality control, based on the current expertise and state-of-the-art knowledge of the task group members. It is regarded as a progress report since it is not the aim of this report to cover all aspects of RC strengthening with composites. Instead, it focuses on those aspects that form the majority of the design problems. several of the topics presented are subject of ongoing research and development, and the details of some modelling approaches may be subject to future revisions. as knowledge in this field is advancing rapidly, the work of the EBR WP will continue. Inspite of this limit in scope, considerable effort has been made to present a bulletin that is today’s state-of-art in the area of strengthening of concrete structures by means of externally bonded FRP reinforcement.