Download Free Ergonomics And Mining Book in PDF and EPUB Free Download. You can read online Ergonomics And Mining and write the review.

The mining industry has experienced important improvements with regard to its safety record and work environment. But there is still room for further improvement and the mining industry now faces the challenge of securing a future workforce: The current workforce is aging, and mining work increasingly requires a more qualified workforce. Designing Ergonomic, Safe, and Attractive Mining Workplaces seeks to give an understanding of what must be considered in the design of mining workplaces. By reviewing and discussing the historic and current development of the mining industry as well as problems related to the safety, ergonomics, and attractiveness of mining workplaces, it demonstrates that the challenges facing the mining industry often need to be solved on a case-to-case basis. The processes through which these issues are managed are of significant importance. To facilitate a proactive approach, the book covers the principles of systematic work environment management, together with examples of methods for risk management and work environment monitoring. It introduces a systematic and iterative design and planning method for the mining industry. This method acknowledges that all relevant stakeholders must be able to influence the design of ergonomic, safe, and attractive mining workplaces. Features Takes a holistic and sociotechnical approach to current and future problems of the mining industry, which normally are dealt with in isolation or through technology Reviews historic, current, and future issues in the mining industry with regards to workplace attractiveness, health, safety, mechanization, automation, and work organization Provides several examples of these issues and attempts to address them (successfully and unsuccessfully) Covers the principles of systematic work environment management together with examples of methods for risk management and work environment monitoring for pro-actively dealing with work environment issues Introduces a systematic and iterative design and planning method for the mining industry that aims to avoid problems of traditional planning approaches and increase stakeholder and employee participation
Work-related injuries, such as back injuries and carpal tunnel syndrome, are the most prevalent, most EXPENSIVE, and most preventable workplace injuries, accounting for more than 647,000 lost days of work annually (according to OSHA estimates). Such injuries, and many others, can be prevented in your facility by establishing an ergonomic design. This book shows you how to apply simple Ergonomic tools and procedures in your plant.Challenging worldwide regulations are forcing some companies to spend thousands of dollars per affected employee in order to comply. This book shows you how to comply with these regulations at a fraction of the cost, in the most timely, efficient method possible.*Learn how to use the Human Factors/Ergonomics tools in process industries*Identify and prioritize Ergonomic issues, develop interventions, and measure their effects*Apply Ergonomics to the design of new facilities
Environmental Ergonomics addresses the problems of maintaining human comfort, activity and health in stressful environments. Its subject areas include thermal environments, illumination, noise and hypo- and hyperbaric environments. The book concentrates fundamentally on the way the thermal environment has affected human comfort, health and performance from the age of cave-dwellings to our age of skyscrapers. This book contains only papers selected from the 10th ICEE held in Japan 23-27 September 2002. The ICEE has been held biannually since 1982, and has firmly established itself as the world's most distinguished conference in its field, offering the ideal forum for research scientists, medical doctors, engineers, administrators, technicians, healthcare professionals and students to share their work and ideas. - Selected papers from the 10th International Conference on Environmental Ergonomics held in Japan, 23-27 September 2002. They have been revised and peer-reviewed. - Papers included in this text have been widely recognised as the catalyst for the recent advances witnessed in Environmental Ergonomics in Asia. They strike a balance between academia and industries' views on environmental ergonomics. - Add this volume to your copy of the Elsevier Ergonomics Book Series.
The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
The approach to the book is analogous to a toolkit. The user will open the book and locate the tool that best fits the ergonomic assessment task he/she is performing. The chapters of the book progress from the concept of ergonomics, through the various assessment techniques, and into the more complex techniques. In addition to discussing the techniques, this book presents them in a form that the readers can readily adapt to their particular situation. Each chapter, where applicable, presents the technique discussed in that chapter and demonstrates how it is used. The supporting material at the end of each chapter contains exercises, case studies and review questions. The case study section of the book presents how to use techniques to analyze a range of workplace scenarios. Topics include: The Basics of Ergonomics; Anthropometry; Office Ergonomics; Administrative Controls; Biomechanics; Hand Tools; Vibration; Workstation Design; Manual Material Handling; Job Requirements and Physical Demands Survey; Ergonomic Survey Tools; Work-related Musculoskeletal Disorders; How to Conduct an Ergonomics Assessment; and Case Studies
Industrially developing countries have the largest populations, the highest levels of poverty, poor health, and illiteracy, and the greatest need for improvement in working conditions. And as the marketplace and the workforce goes increasingly global, accountability with regard to the abuse of cheap labor in developing countries is becoming an issu
p="" This highly informative and carefully presented book focuses on the fields of ergonomics/human factors and discusses the future of the community vis-à-vis health problems, productivity, aging, etc. Ergonomic intercession must be seen in light of its effect on productivity because ergonomic solutions will improve productivity as the reduction of environmental stressors, awkward postures and efforts lead to a reduction in task execution time. The book provides promising evidence that the field of ergonomics continues to thrive and develop deeper insights into how work environments, products and systems can be developed to meet needs, demands and limitations of humans and how they can support productivity improvements. Some of the themes covered are anthropometry and workplace design, biomechanics and modelling in ergonomics, cognitive and environmental ergonomics, ergonomic intervention and productivity, ergonomics in transport, mining, agriculture and forestry, health systems, work physiology and sports ergonomics, etc. This book is beneficial to academicians, policymakers and the industry alike. ^
The consideration of human factors issues is vital to the mining industry. As in other safety-critical domains, human performance problems constitute a significant threat to system safety, making the study of human factors an important field for improving safety in mining operations. The primary purpose of this book is to provide the reader with a much-needed overview of human factors within the mining industry, in particular to understand the role of human error in mine safety, explaining contemporary risk management and safety systems approaches. The approach taken is multidisciplinary and holistic, based on a model of the systems of work in the mining industry domain. The ingredients in this model include individual operators, groups/teams, technology/equipment, work organisation and the physical environment. Throughout the book, topics such as human error and safety management are covered through the use of real examples and case studies, allowing the reader to see the practical significance of the material presented while making the text rigorous, useful and enjoyable. Understanding Human Error in Mine Safety is written for professionals in the field, researchers and students of mining engineering, safety or human factors.
Machines increasingly pervade the mining industry, reducing manual labor and raising production. While the use of new technologies such as remote control, vision enhancement technologies, continuous haulage, and automated equipment has grown, so has the potential for new health and safety risks. Written by leading experts from Australia and North America, Human Factors for the Design, Operation, and Maintenance of Mining Equipment covers the impact of new mining technology on human work performance and safety. Ergonomics experts Tim John Horberry, Robin Burgess-Limerick, and Lisa J. Steiner draw on their personal experience to provide up-to-date research, case studies, and examples, making the book useful, accurate, informative, and easy to read. They set the scene with a general, yet fundamental review of human factors information related to equipment. They then examine the physical environment and the importance of key concerns such as vibration, noise, heat, and dust in maintaining and operating mining equipment. The authors expand their scope by examining wider organizational and task factors related to mining equipment, including the long-standing issues of operator fatigue and stress as well as newer concerns such as distraction and information overload. A synthesis of available human factors knowledge and research, the book describes human factors principles applied to mining equipment from a multidisciplinary perspective and combines it into one volume. The authors combine their in-the-trenches experience and academic expertise to present a treatment that balances breadth with depth. The book supplies a much-needed overview of the human element in the journey to optimal equipment design of mining equipment.