Download Free Energy Efficiency Refurbishments Book in PDF and EPUB Free Download. You can read online Energy Efficiency Refurbishments and write the review.

No detailed description available for "Energy efficiency refurbishments".
Buildings are one of the main causes of the emission of greenhouse gases in the world. Europe alone is responsible for more than 30% of emissions, or about 900 million tons of CO2 per year. Heating and air conditioning are the main cause of greenhouse gas emissions in buildings. Most buildings currently in use were built with poor energy efficiency criteria or, depending on the country and the date of construction, none at all. Therefore, regardless of whether construction regulations are becoming stricter, the real challenge nowadays is the energy rehabilitation of existing buildings. It is currently a priority to reduce (or, ideally, eliminate) the waste of energy in buildings and, at the same time, supply the necessary energy through renewable sources. The first can be achieved by improving the architectural design, construction methods, and materials used, as well as the efficiency of the facilities and systems; the second can be achieved through the integration of renewable energy (wind, solar, geothermal, etc.) in buildings. In any case, regardless of whether the energy used is renewable or not, the efficiency must always be taken into account. The most profitable and clean energy is that which is not consumed.
Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation
Climate change is one of the most important environmental problems faced by Planet Earth. The majority of CO2 emissions come from burning fossil fuels for energy production and improvements in energy efficiency shows the greatest potential for any single strategy to abate global greenhouse gas (GHG) emissions from the energy sector. Energy related emissions account for almost 80% of the EU's total greenhouse gas emissions. The building sector is the largest energy user responsible for about 40% of the EU's total final energy consumption. In Europe the number of installed air conditioning systems has increased 500% over the last 20 years, but in that same period energy cooling needs have increased more than 20 times. The increase in energy cooling needs relates to the current higher living and working standards. In urban environments with low outdoor air quality (the general case) this means that in summer-time one cannot count on natural ventilation to reduce cooling needs. Do not forget the synergistic effect between heat waves and air pollution which means that outdoor air quality is worse in the summer aggravating cooling needs. Over the next few years this phenomenon will become much worse because more people will live in cities, more than 2 billion by 2050 and global warming will aggravate cooling needs. - An overview of materials to lessen the impact of urban heat islands - Excellent coverage of building materials to reduce air condtioning needs - Innovative products discussed such as Thermo and Electrochromic materials
Cost-Effective Energy Efficient Building Retrofitting:Materials, Technologies, Optimization and Case Studies provides essential knowledge for civil engineers, architects, and other professionals working in the field of cost-effective energy efficient building retrofitting. The building sector is responsible for high energy consumption and its global demand is expected to grow as each day there are approximately 200,000 new inhabitants on planet Earth. The majority of electric energy will continue to be generated from the combustion of fossil fuels releasing not only carbon dioxide, but also methane and nitrous oxide. Energy efficiency measures are therefore crucial to reduce greenhouse gas emissions of the building sector. Energy efficient building retrofitting needs to not only be technically feasible, but also economically viable. New building materials and advanced technologies already exist, but the knowledge to integrate all active components is still scarce and far from being widespread among building industry stakeholders. - Emphasizes cost-effective methods for the refurbishment of existing buildings, presenting state-of-the-art technologies - Includes detailed case studies that explain various methods and Net Zero Energy - Explains optimal analysis and prioritization of cost effective strategies
This book examines energy management practices within a wide range of public and private sector organisations.
Buildings are the largest energy consuming sector in the world, and account for over one-third of total final energy consumption and an equally important source of carbon dioxide (CO2) emissions. Achieving significant energy and emissions reduction in the buildings sector is a challenging but achievable policy goal. Transition to Sustainable Buildings presents detailed scenarios and strategies to 2050, and demonstrates how to reach deep energy and emissions reduction through a combination of best available technologies and intelligent public policy. This IEA study is an indispensible guide for decision makers, providing informative insights on: cost-effective options, key technologies and opportunities in the buildings sector; solutions for reducing electricity demand growth and flattening peak demand; effective energy efficiency policies and lessons learned from different countries; future trends and priorities for ASEAN, Brazil, China, the European Union, India, Mexico, Russia, South Africa and the United States; implementing a systems approach using innovative products in a cost effective manner; and pursuing whole-building (e.g. zero energy buildings) and advanced-component policies to initiate a fundamental shift in the way energy is consumed.
The recast of the Energy Performance of Buildings Directive (EPBD) was adopted by the European Parliament and the Council of the European Union on 19 May 2010. For new buildings, the recast fixes 2020 as the deadline for all new buildings to be “nearly zero energy” (and even sooner for public buildings – by the end of 2018). This book gives practitioner an important tool to tackle the challenges of building refurbishment towards nearly zero energy. This book is welcome at this time and sets the scene for professionals whether practitioners or researchers to learn more about how we can make whether old or new buildings more efficient and effective in terms of energy performance.
This bibliography was prepared to assist participants in the 21st Air Force Academy Assembly to be held at the Academy on 16-21 April 1979. It represents a selected portion of the Air Force Academy Library's holdings on the topic indicated.
How to reimagine existing buildings to create a more sustainable future The construction and operation of buildings is responsible for 41 percent of all primary energy use and 48 percent of all carbon emissions, and the impact of the demolition and removal of an older building can greatly diminish the advantages of adding green technologies to new construction. In Building Reuse, Kathryn Rogers Merlino makes an impassioned case that truly sustainable design requires reusing and reimagining existing buildings. Additionally, Merlino calls for a more expansive view of preservation that goes beyond keeping only the most distinctive structures based on their historical and cultural significance to embrace the creative reuse of even unremarkable buildings for their environmental value. Building Reuse includes a compelling range of case studies—from a private home to an eighteen-story office building—all located in the Pacific Northwest, a region with a long history of sustainable design and urban growth policies that have made reuse projects feasible. Reusing existing buildings can be challenging to accomplish, but changing the way we think about environmentally conscious architecture has the potential to significantly reduce energy consumption, carbon emissions, and waste.