Download Free Electron Microscopical Investigation Of Interdiffusion And Phase Formation At Gd2o3 Ceo2 And Sm2o3 Ceo2 Interfaces Book in PDF and EPUB Free Download. You can read online Electron Microscopical Investigation Of Interdiffusion And Phase Formation At Gd2o3 Ceo2 And Sm2o3 Ceo2 Interfaces and write the review.

Christian Rockenhäuser adresses phase formation and cation interdiffusion of the GdxCe1-xO2-x/2-and SmxCe1-xO2-x/2-material systems at temperatures ranging from 970 to 1270°C. Diffusion couples with CeO2/Sm2O3 and CeO2/Gd2O3 interfaces were fabricated for the investigations. The resulting reaction phases were investigated utilizing transmission electron microscopy (TEM) and allow conclusions regarding the phase diagrams in the examined temperature range. A miscibility gap can be ruled out for GdxCe1-xO2-x/2 across the whole composition range. Cation interdiffusion coefficients were determined for both material systems by measuring and evaluating concentration profiles at the material interfaces. The activation enthalpies for interdiffusion were calculated using the temperature dependence of the interdiffusion coefficients. The study for the first time compiles comprehensively the previous results regarding the phase diagrams of the two material systems since 1923.
Christian Rockenhäuser adresses phase formation and cation interdiffusion of the GdxCe1-xO2-x/2-and SmxCe1-xO2-x/2-material systems at temperatures ranging from 970 to 1270°C. Diffusion couples with CeO2/Sm2O3 and CeO2/Gd2O3 interfaces were fabricated for the investigations. The resulting reaction phases were investigated utilizing transmission electron microscopy (TEM) and allow conclusions regarding the phase diagrams in the examined temperature range. A miscibility gap can be ruled out for GdxCe1-xO2-x/2 across the whole composition range. Cation interdiffusion coefficients were determined for both material systems by measuring and evaluating concentration profiles at the material interfaces. The activation enthalpies for interdiffusion were calculated using the temperature dependence of the interdiffusion coefficients. The study for the first time compiles comprehensively the previous results regarding the phase diagrams of the two material systems since 1923.
Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
This book presents a broad, general introduction to the processing of Sol-Gel technologies. This updated volume serves as a general handbook for researchers and students entering the field. This new edition provides updates in fields that have undergone rapid developments, such as Ceramics, Catalysis, Chromatropgraphy, biomaterials, glass science, and optics. It provides a simple, compact resource that can also be used in graduate-level materials science courses.
This book presents the latest research on the area of nano-energetic materials, their synthesis, fabrication, patterning, application and integration with various MEMS systems and platforms. Keeping in mind the applications for this field in aerospace and defense sectors, the articles in this volume contain contributions by leading researchers in the field, who discuss the current challenges and future perspectives. This volume will be of use to researchers working on various applications of high-energy research.
Fuel cell technology is quite promising for conversion of chemical energy of hydrocarbon fuels into electricity without forming air pollutants. There are several types of fuel cells: polymer electrolyte fuel cell (PEFC), phosphoric acid fuel cell (PAFC), molten carbonate fuel cell (MCFC), solid oxide fuel cell (SOFC), and alkaline fuel cell (AFC). Among these, SOFCs are the most efficient and have various advantages such as flexibility in fuel, high reliability, simple balance of plant (BOP), and a long history. Therefore, SOFC technology is attracting much attention as a power plant and is now close to marketing as a combined heat and power generation system. From the beginning of SOFC development, many perovskite oxides have been used for SOFC components; for example, LaMnO -based oxide for the cathode and 3 LaCrO for the interconnect are the most well known materials for SOFCs. The 3 current SOFCs operate at temperatures higher than 1073 K. However, lowering the operating temperature of SOFCs is an important goal for further SOFC development. Reliability, durability, and stability of the SOFCs could be greatly improved by decreasing their operating temperature. In addition, a lower operating temperature is also beneficial for shortening the startup time and decreasing energy loss from heat radiation. For this purpose, faster oxide ion conductors are required to replace the conventional Y O -stabilized ZrO 2 3 2 electrolyte. A new class of electrolytes such as LaGaO is considered to be 3 highly useful for intermediate-temperature SOFCs.
The book summarizes the current state of the solid oxide fuel cell (SOFC) technology in power generation applications. It describes the single cells, SOFC stacks, micro-combined heat and power systems, large-scale stationary power generators and polygeneration units. The principles of modeling, simulation and controls of power systems with solid oxide fuel cells are presented and discussed. Authors provide theoretical background of the technology followed by the essential insights into the integrated power systems. Selected aspects of the design, construction and operation of power units in range from single kilowatts to hundreds of kilowatts are presented. Finally, the book reports the selected studies on prototype systems which have been constructed in Europe. The book discusses the theoretical and practical aspects of operation of power generators with solid oxide fuel cells including fabrication of cells, design of stacks, system modeling, simulation of stationary and non-stationary operation of systems, fuel preparation and controls.
This book provides readers with a comprehensive overview of the science of superconducting materials. It serves as a fundamental information source on the actual techniques and methodologies involved in superconducting materials growth, characterization and processing. This book includes coverage of several categories of medium and high-temperature superconducting materials: cuprate oxides, borides, and iron-based chalcogenides and pnictides. Provides a single-source reference on superconducting materials growth, characterization and processing; Bridges the gap between materials science and applications of superconductors; Discusses several categories of superconducting materials such as cuprate oxides, borides, and iron-based chalcogenides and pnictides; Covers synthesis, characterization, and processing of superconducting materials, as well as the nanoengineering approach to tailor the properties of the used materials at the nanoscale level.
The chapters covered in this book include emerging new techniques on sintering. Major experts in this field contributed to this book and presented their research. Topics covered in this publication include Spark plasma sintering, Magnetic Pulsed compaction, Low Temperature Co-fired Ceramic technology for the preparation of 3-dimesinal circuits, Microwave sintering of thermistor ceramics, Synthesis of Bio-compatible ceramics, Sintering of Rare Earth Doped Bismuth Titanate Ceramics prepared by Soft Combustion, nanostructured ceramics, alternative solid-state reaction routes yielding densified bulk ceramics and nanopowders, Sintering of intermetallic superconductors such as MgB2, impurity doping in luminescence phosphors synthesized using soft techniques, etc. Other advanced sintering techniques such as radiation thermal sintering for the manufacture of thin film solid oxide fuel cells are also described.