Download Free Dtnsrdc Three Component Laser Doppler Velocimetry Mean Velocity Data Analysis Book in PDF and EPUB Free Download. You can read online Dtnsrdc Three Component Laser Doppler Velocimetry Mean Velocity Data Analysis and write the review.

This report describes how the columinous amount of data from Laser Doppler Velocimetry (LDV) experiments can be distilled to produce useful and comprehendable results. The procedures draw heavily on the experience and development work done in implementing three component LDV systems for the towing tanks and large wind tunnels of the David Taylor Naval Ship Research and Development Center. The standard procedures and computer software described are meant to reduce the time needed to analyze and report LDV experiments. The procedures address data collection, data calibration, measurement error estimation, data display graphics, and short and long term data storage. Keywords: Experimental techniques; Velocity measurements; Laser doppler velocimetry; Fluid flow; Error analysis; Three component fluid flow.
A three-component Laser Doppler Velocimetry (LDV) system is tested. Thirteen measurement errors are quantified in terms of: velocity field characteristics, LDV equipment design, and user - chosen system operating parameters. Operating parameter effects on measurement error are emphasized because usually they are the only way an experimenter can control errors. Background sections and appendixes explain in considerable detail, the origin of these measurement errors. First, the operating parameter choices for the towing tank LDV system are listed with a description of how they affect measurements. Then, each of the measurement errors is discussed, and this helps establish a functional relationship to operating parameters, LDV equipment design, and flow field characteristics. Keywords: Laser velocimeter; Three component velocity measurement; Towing tank; Bias errors.
In fluid mechanics, velocity measurement is fundamental in order to improve the behavior knowledge of the flow. Velocity maps help us to understand the mean flow structure and its fluctuations, in order to further validate codes. Laser velocimetry is an optical technique for velocity measurements; it is based on light scattering by tiny particles assumed to follow the flow, which allows the local fluid flow velocity and its fluctuations to be determined. It is a widely used non-intrusive technique to measure velocities in fluid flows, either locally or in a map. This book presents the various techniques of laser velocimetry, as well as their specific qualities: local measurements or in plane maps, mean or instantaneous values, 3D measurements. Flow seeding with particles is described with currently used products, as well as the appropriate aerosol generators. Post-processing of data allows us to extract synthetic information from measurements and to perform comparisons with results issued from CFD codes. The principles and characteristics of the different available techniques, all based on the scattering of light by tiny particles embedded in the flow, are described in detail; showing how they deliver different information, either locally or in a map, mean values and turbulence characteristics.
The contents of this volume reflect to a large extent the efforts made by a group of Institutes at the ETH Zürich to develop new techniques for measurements of flows in fluids in the last decade. The motivation came from the study of tr~sport and mixing processes in natural and industrial systems. One of the characteristic properties of turbulence is its high mixing efficiency. The techniques developed are therefore suitable, although not exclusively, for turbulence measurements. They can be subdivided into point-measurements and field-measurements. The aim of the point-measurements developed is to determine the three components of the velocity and all their first derivatives with good temporal resolution and accuracy in turbulent flows. The old and weIl established method of hot-wire anemometry was used for this purpose. One of the main achievements in this context is the construction of miniature multi-wire probes. This technique was introduced to the Institute of Hydromechanics and Water Resources Management of ETH Zürich by Profs. A. Tsinober and E. Kit from Tel-Aviv University. This was made possible by the generous financial support by ETH, for which I would like to express my gratitude on this occasion. In addition, Dr. F.E. Joergensen from DANTEC contributed an example of recent developments in the hardware ofConstant Temperature Anemometry (CTA), for which I am very thankful.
A water tunnel investigation was conducted to demonstrate the capabilities of a laser-based instrument that can measure velocity and fluorescence intensity simultaneously. Fluorescence intensity of an excited fluorescent dye is directly related to concentration level and is used to indicate the extent of mixing in flow. This instrument is a three-dimensional laser Doppler velocimeter (LDV) in combination with a fluorometer for measuring fluorescence intensity variations. This capability allows simultaneous flow measurements of the three orthogonal velocity components and mixing within the same region. Two different flows which were generated by two models were studied: a generic nonaxisymmetric nozzle propulsion simulation model with an auxiliary internal water source that generated a jet flow and an axisymmetric forebody model with a circular sector strake that generated a vortex flow. The off-body flow fields around these models were investigated in the Langley 16- by 24-Inch Water Tunnel. The experimental results were used to calculate 17 quantities that included mean and fluctuating velocities, Reynolds stresses, mean and fluctuating dye fluorescence intensities (proportional to concentration), and fluctuating velocity and dye concentration correlations. An uncertainty analysis was performed to establish confidence levels in the experimental results. In general, uncertainties in mean velocities varied between 1 and 7 percent of free-stream velocity; uncertainties in fluctuating velocities varied between 1 and 5 percent of reference values. The results show characteristics that are unique to each type of flow. Neuhart, Dan H. and Wing, David J. and Henderson, Uleses C., Jr. Langley Research Center...