Download Free Determination Of Design Data For Heat Treated Titanium Alloy Sheet Volume I Summary Of Mechanical And Physical Property Data Collected Including Tensile Creep And Fatigue Book in PDF and EPUB Free Download. You can read online Determination Of Design Data For Heat Treated Titanium Alloy Sheet Volume I Summary Of Mechanical And Physical Property Data Collected Including Tensile Creep And Fatigue and write the review.

Mechanical and physical property data, necessary to fulfill the requirements of Phase II of the Department of Defense Titanium Alloy Sheet Rolling Program, were obtained for selected solution treated and aged titanium alloys in sheet form. Four alloys were investigated: BI20VCA, (Ti-13V-11Cr-3Al), Ti-6Al-4v, Ti-2.5Al-16V, and Ti-4Al-3Mo-1V. They were suppled by the producers in the heat treated condtion from fhree or more heats and three thicknesses of each alloy. Static mechanical property data for tension, compression, bearing, shear and crippling; creep and rupture data for tension, compression, bearing and shear; and axial-load fatigue data were obtained at room and elevated temperatures. Fastener and weld joint data from -320F to 80F and physical properties from -420F to 1200F were obtained. Volume 1 summarizes mechanical and physical properties in a form consistant within those given MIL-HDBK-5.
Mechanical and physical property data, necessary to fulfill the requirements of Phase II of the Department of Defense Titanium Alloy Sheet Rolling Program, were obtained for selected solution treated and aged titanium alloys in sheet form. Four alloys were investigated: BI20VCA, (Ti-13V-11Cr-3Al), Ti-6Al-4v, Ti-2.5Al-16V, and Ti-4Al-3Mo-1V. They were suppled by the producers in the heat treated condtion from fhree or more heats and three thicknesses of each alloy. Static mechanical property data for tension, compression, bearing, shear and crippling; creep and rupture data for tension, compression, bearing and shear; and axial-load fatigue data were obtained at room and elevated temperatures. Fastener and weld joint data from -320F to 80F and physical properties from -420F to 1200F were obtained. Volume 2b contains procedures and results for creep and fatigue tests.
Technical reports published by the Air Force Materials Laboratoy during the period 1 July 1962 - 30 June 1963 are abstracted herein. Reports on reseqrch conducted by the Air Force Materials Laboratory personnel as well as that conducted on contract are included. These reports cover basic and applied research in the materials area being conducted by the Metals and Ceramics Division, Non-metallic Materials Division, Materials Physics Division, Manufacturing Technology Division, and Materials Applications Division of the Air Force Materials Laboratory.