Download Free Designing Physical Access Control Systems Book in PDF and EPUB Free Download. You can read online Designing Physical Access Control Systems and write the review.

Electronic Access Control introduces the fundamentals of electronic access control through clear, well-illustrated explanations. Access Control Systems are difficult to learn and even harder to master due to the different ways in which manufacturers approach the subject and the myriad complications associated with doors, door frames, hardware, and electrified locks. This book consolidates this information, covering a comprehensive yet easy-to-read list of subjects that every Access Control System Designer, Installer, Maintenance Tech or Project Manager needs to know in order to develop quality and profitable Alarm/Access Control System installations. Within these pages, Thomas L. Norman – a master at electronic security and risk management consulting and author of the industry reference manual for the design of Integrated Security Systems – describes the full range of EAC devices (credentials, readers, locks, sensors, wiring, and computers), showing how they work, and how they are installed. - A comprehensive introduction to all aspects of electronic access control - Provides information in short bursts with ample illustrations - Each chapter begins with outline of chapter contents and ends with a quiz - May be used for self-study, or as a professional reference guide
A practical reference written to assist the security professional in clearly identifying what systems are required to meet security needs as defined by a threat analysis and vulnerability assessment. All of the elements necessary to conduct a detailed survey of a facility and the methods used to document the findings of that survey are covered. Once the required systems are determined, the chapters following present how to assemble and evaluate bids for the acquisition of the required systems in a manner that will meet the most rigorous standards established for competitive bidding. The book also provides recommended approaches for system/user implementation, giving checklists and examples for developing management controls using the installed systems. This book was developed after a careful examination of the approved reference material available from the American Society for Industrial Security (ASIS International) for the certification of Physical Security Professionals (PSP). It is intended to fill voids left by the currently approved reference material to perform implementation of systems suggested in the existing reference texts. This book is an excellent "How To” for the aspiring security professional who wishes to take on the responsibilities of security system implementation, or the security manager who wants to do a professional job of system acquisition without hiring a professional consultant. * Offers a step-by-step approach to identifying the application, acquiring the product and implementing the recommended system. * Builds upon well-known, widely adopted concepts prevalent among security professionals. * Offers seasoned advice on the competitive bidding process as well as on legal issues involved in the selection of applied products.
Design and Evaluation of Physical Security Systems, Second Edition, includes updated references to security expectations and changes since 9/11. The threat chapter includes references to new threat capabilities in Weapons of Mass Destruction, and a new figure on hate crime groups in the US. All the technology chapters have been reviewed and updated to include technology in use since 2001, when the first edition was published. Garcia has also added a new chapter that shows how the methodology described in the book is applied in transportation systems. College faculty who have adopted this text have suggested improvements and these have been incorporated as well. This second edition also includes some references to the author's recent book on Vulnerability Assessment, to link the two volumes at a high level. - New chapter on transportation systems - Extensively updated chapter on threat definition - Major changes to response chapter
This essential resource for professionals and advanced students in security programming and system design introduces the foundations of programming systems security and the theory behind access control models, and addresses emerging access control mechanisms.
Addressing the rising security issues during the design stages of cyber-physical systems, this book develops a systematic approach to address security at early design stages together with all other design constraints. Cyber-attacks become more threatening as systems are becoming more connected with the surrounding environment, infrastructures, and other systems. Security mechanisms can be designed to protect against attacks and meet security requirements, but there are many challenges of applying security mechanisms to cyber-physical systems including open environments, limited resources, strict timing requirements, and large number of devices. Designed for researchers and professionals, this book is valuable for individuals working in network systems, security mechanisms, and system design. It is also suitable for advanced-level students of computer science.
Prepared by the Task Committee on Structural Design for Physical Security of the Structural Engineering Institute of ASCE. This report provides guidance to structural engineers in the design of civil structures to resist the effects of terrorist bombings. As dramatized by the bombings of the World Trade Center in New York City and the Murrah Building in Oklahoma City, civil engineers today need guidance on designing structures to resist hostile acts. The U.S. military services and foreign embassy facilities developed requirements for their unique needs, but these the documents are restricted. Thus, no widely available document exists to provide engineers with the technical data necessary to design civil structures for enhanced physical security. The unrestricted government information included in this report is assembled collectively for the first time and rephrased for application to civilian facilities. Topics include: determination of the threat, methods by which structural loadings are derived for the determined threat, the behavior and selection of structural systems, the design of structural components, the design of security doors, the design of utility openings, and the retrofitting of existing structures. This report transfers this technology to the civil sector and provides complete methods, guidance, and references for structural engineers challenged with a physical security problem.
Market_Desc: Software and systems developers and engineers and technical managers looking at how to build in security to systems they are building; for students to learn good security practices. Special Features: · Essential for designers who are building large-scale, possibly enterprise systems who want best practice solutions to typical security problems· Real world case studies illustrate how to use the patterns in specific domains· Focussed on developers viewpoint and needs About The Book: Most security books are targeted at security engineers and specialists. Few show how build security into software. None breakdown the different concerns facing security at different levels of the system: the enterprise, architectural and operational layers. This book addresses the full engineering spectrum. It extends to the larger enterprise context and shows engineers how to integrate security in the broader engineering process.
This publication provides comprehensive detailed guidance for States, competent authorities and operators on how to implement the recommendations and implementing guidance of existing IAEA Nuclear Security Series publications for an effective physical protection system (PPS) for nuclear facilities and nuclear materials in use and storage. It provides further technical detail on how to design and evaluate a PPS, with respect to the selection and integration of appropriate, effective physical protection measures (including equipment). The publication is intended to serve as a general reference, pointing users to other complementary guidance on specific topics.
A practical reference written to assist the security professional in clearly identifying what systems are required to meet security needs as defined by a threat analysis and vulnerability assessment. All of the elements necessary to conduct a detailed survey of a facility and the methods used to document the findings of that survey are covered. Once the required systems are determined, the chapters following present how to assemble and evaluate bids for the acquisition of the required systems in a manner that will meet the most rigorous standards established for competitive bidding. The book also provides recommended approaches for system/user implementation, giving checklists and examples for developing management controls using the installed systems. This book was developed after a careful examination of the approved reference material available from the American Society for Industrial Security (ASIS International) for the certification of Physical Security Professionals (PSP). It is intended to fill voids left by the currently approved reference material to perform implementation of systems suggested in the existing reference texts. This book is an excellent "How To for the aspiring security professional who wishes to take on the responsibilities of security system implementation, or the security manager who wants to do a professional job of system acquisition without hiring a professional consultant.* Offers a step-by-step approach to identifying the application, acquiring the product and implementing the recommended system.* Builds upon well-known, widely adopted concepts prevalent among security professionals.* Offers seasoned advice on the competitive bidding process as well as on legal issues involved in the selection of applied products.
Effective Physical Security, Fifth Edition is a best-practices compendium that details the essential elements and latest developments in physical security protection. This new edition is completely updated, with new chapters carefully selected from the author's work that set the standard. This book contains important coverage of environmental design, security surveys, locks, lighting, and CCTV, the latest ISO standards for risk assessment and risk management, physical security planning, network systems infrastructure, and environmental design. - Provides detailed coverage of physical security in an easily accessible format - Presents information that should be required reading for ASIS International's Physical Security Professional (PSP) certification - Incorporates expert contributors in the field of physical security, while maintaining a consistent flow and style - Serves the needs of multiple audiences, as both a textbook and professional desk reference - Blends theory and practice, with a specific focus on today's global business and societal environment, and the associated security, safety, and asset protection challenges - Includes useful information on the various and many aids appearing in the book - Features terminology, references, websites, appendices to chapters, and checklists