Download Free Design Studies Towards A 4 Mw 170 Ghz Coaxial Cavity Gyrotron Book in PDF and EPUB Free Download. You can read online Design Studies Towards A 4 Mw 170 Ghz Coaxial Cavity Gyrotron and write the review.

In this work the feasibility of a 4 MW 170 GHz coaxial-cavity gyrotron for continuous wave operation is demonstrated. For the first time complete physical designs of the major gyrotron components are elaborated. In a first step, one possible new operating mode is determined, followed by the development of detailed physical designs of the major gyrotron components: Diode and triode type electron gun, coaxial cavity, two-beam quasi-optical output coupler and depressed collector.
The physical design of cavity and magnetron injection gun (MIG) for a realistic, DEMO-compatible, coaxial-cavity 238 GHz 2 MW CW fusion gyrotron is developed in this work, having auxiliary frequencies at 170 GHz and 204 GHz. Novel systematic approaches towards multi-frequency mode selection, magnet requirements, and MIG design are presented. Mode deterioration and voltage depression variation due to insert misalignment versus cavity wall and/or versus electron beam are studied.
Magnetic fusion is one approach to generate thermonuclear fusion power in an environmental friendly way. The Electron Cyclotron Resonance Heating is considered as the major concept for startup, heating and control of the fusion plasma. Megawatt-class gyrotrons generate the required microwave power. This work focuses on advanced key components and technologies for a DEMO relevant 2 MW gyrotron. One major focus is on the development of advanced Magnetron Injection Guns. Another focus is on the red
Ein Gyrotron wird in magnetisch eingeschlossenen Plasmaexperimenten für Heizung, Stromtrieb, Plasmastabilisierung und Plasmadiagnostik verwendet. In dieser Arbeit wird der erste Entwurf und Bau eines Mehrfrequenz-/Mehrzweck Pre-Prototyp Gyrotrons in koaxialer Technologie vorgestellt, das bei (136)/170/204 GHz mit einer Ausgangsleistung von 2 MW arbeitet. Dies ist der erste Schritt zum Betrieb bei Frequenzen bis zu 240 GHz unter Verwendung der Koaxialhohlraum-Gyrotrontechnologie. - A gyrotron is used in magnetically confined plasma experiments for heating, current drive, plasma stabilization and plasma diagnostics. This work presents the first design and construction of a multi-frequency / multi-purpose coaxial-cavity pre-prototype gyrotron operating at (136)/170/204 GHz with an output power of 2 MW. It is the first step towards operating frequencies up to 240 GHz using the coaxial-cavity gyrotron technology.
The DEMOnstration fusion power plant (DEMO) will be the first fusion reactor, which is intended to generate net electrical power. For successful operation of DEMO, high-power gyrotrons with operating frequencies up to 240 GHz are required for plasma heating and stabilization. In this work, a systematic feasibility study and tolerance analysis are performed for the conventional-type hollow-cavity DEMO gyrotrons. The various approaches are also suggested to identify its operational limits.
Gyrotrons are high-power mm-wave tubes. Here, the design, construction and experimental investigation of a 20 kW, 28 GHz gyrotron (2nd harmonic) are reported. This tube was designed to evaluate new emitters for future highly efficient and reliable fusion gyrotrons and for material processing applications. Following experimental results have been achieved in CW operation: 22.5 kW output power at 23.4 kV electron beam voltage and 2.23 A beam current with the world record efficiency of 43 %.
Magnetic confinement fusion relies on plasma heating and plasma control using gyrotron oscillators providing at megawatt power levels. The operational reliability decreases when operating at the performance limits due to increasing parasitic mode activity. This work demonstrates for the first time the automated, fast recovery of nominal gyrotron operation during a pulse by exploiting the hysteretic gyrotron behaviour after a mode switch being in use at the Wendelstein 7-X ECRH facility.
Dynamic after-cavity interaction (ACI) in megawatt-class gyrotrons is investigated that could lead to lower output mode purity and increased level of internal stray radiation. The self-consistent KIT-IHM multi-mode-code SELFT has been modified to extend the simulation domain into the radius up-taper section of the gyrotron cavity where the probability of ACI exists. Studies on four different gyrotron configurations confirm that undesired interactions in the up-taper region can result in additional parasitic oscillations with relative power in the 1%-range.
The increasing demand for powerful, reliable, and efficient gyrotron oscillators for Electron Cyclotron Resonance Heating (ECRH) in fusion plasma experiments requires a close look at the various factors in gyrotrons that determine gyrotron performance. In this frame, the influence of emitter surface roughness, emission inhomogeneity, and secondary electron generation on gyrotron operation is presented, with focus on Low Frequency Oscillations (LFOs) and Electron Beam Halo (EBH) generation.