Download Free Conducted Electromagnetic Interference In Power Converters Modeling Prediction And Reduction Book in PDF and EPUB Free Download. You can read online Conducted Electromagnetic Interference In Power Converters Modeling Prediction And Reduction and write the review.

This book belongs to the subject of electrical engineering. It focuses on the modeling, prediction and reduction of conducted EMI in power converters including the AC-DC rectifiers, DC-DC converters and DC-AC inverters and provides the analytical models and solutions to conducted EMI issues in practical applications. The theoretical analysis, simulation and experimental results are well presented with figures and tables. This book is an essential and valuable reference for the graduate students and academics majoring in power electronics and the engineers being engaged in solving the conducted EMI issues in power converters. Senior undergraduate students majoring in electrical engineering and automation engineering also find this book useful.
Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials.
Provides a concise and thorough reference for designing electrical and electronic systems that employ adjustable speed drives Electrical and electronic systems that employ adjustable speed drives are being increasingly used in present-day automation applications. They are considered by many application engineers as one of the most interfering components, especially in a contemporarily faced industrial environment. This book fills the gap between the high-level academic knowledge in the electromagnetic compatibility (EMC) field and the recommended practical rules for assuring electromagnetic compatibility margin. It focuses on finding and formulating the issues that often occur with the generation and propagation of conducted emission in AC motor drives fed by frequency converters, rather than proposing specific solutions for dealing with them. It also features explanations of selected academic backgrounds of EMC and presents practical case studies. The book starts with an introduction to conducted emission in adjustable speed drives. It then goes on to offer in-depth chapters covering conducted emission origins in switch-mode power converters; conducted emission generation by frequency converter in adjustable speed drives (ASD); propagation of motor side originated conducted emission towards the power grid; modeling of conducted emission in ASD; broadband behavior of ASD components; and impact of a motor feeding cable on CM currents generated in ASD. In addition, this resource: Presents state-of-the-art analysis of undesirable high frequency phenomena accompanying AC motor speed control Discusses the fundamentals of phenomena of electromagnetic interference (EMI) generation in switch mode static converters Provides methodology of modeling-conducted EMI generation and propagation in ASD High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters: Sources and Propagation Paths will appeal to scholars and a wide range of professionals who are involved in the stages of development, design, and application of adjustable speed drives in accordance with ever-increasing EMC requirements.
This book includes high-quality research papers presented at the Fourth International Conference on Communication, Computing and Electronics Systems (ICCCES 2022), held at the PPG Institute of Technology, Coimbatore, India, on September 15–16, 2022. The book focuses mainly on the research trends in cloud computing, mobile computing, artificial intelligence and advanced electronics systems. The topics covered are automation, VLSI, embedded systems, optical communication, RF communication, microwave engineering, artificial intelligence, deep learning, pattern recognition, communication networks, Internet of things, cyber-physical systems and healthcare informatics.
• Discusses about the basic principles of EMI/EMC including causes and events. • Makes reader understand the problems in different applications because of EMI/EMC and the reducing methods. • Explores real-world case studies with code to provide hands-on experience. • Reviews design strategies for mitigation of noise. • Includes MATLAB, PSPICE, ADS simulations for designing EMI Filter circuits.
This book is a technical publication for students, scholars and engineers in electrical engineering, focusing on the pulse-width-modulation (PWM) technologies in power electronics area. Based on an introduction of basic PWM principles this book analyzes three major challenges for PWM on system performance: power losses, voltage/current ripple and electromagnetic interference (EMI) noise, and the lack of utilization of control freedoms in conventional PWM technologies. Then, the model of PWM's impact on system performance is introduced, with the current ripple prediction method for voltage source converter as example. With the prediction model, two major advanced PWM methods are introduced: variable switching frequency PWM and phase-shift PWM, which can reduce the power losses and EMI for the system based on the prediction model. Furthermore, the advanced PWM can be applied in advanced topologies including multilevel converters and paralleled converters. With more control variables in the advanced topologies, performance of PWM can be further improved. Also, for the special problem for common-mode noise, this book introduces modified PWM method for reduction. Especially, the paralleled inverters with advanced PWM can achieve good performance for the common-mode noise reduction. Finally, the implementation of PWM technologies in hardware is introduced in the last part.
This book provides a sound grasp of the fundamental concepts, applications, and practice of EMC. Developments in recent years have resulted in further increases in electrical component density, wider penetration of wireless technologies, and a significant increase in complexity of electrical and electronic equipment. New materials, which can be customized to meet EMC needs, have been introduced. Considerable progress has been made in developing numerical tools for complete system EMC simulation. EMC is now a central consideration in all industrial sectors. Maintaining the holistic approach of the previous edition of Principles and Techniques of Electromagnetic Compatibility, the Third Edition updates coverage of EMC to reflects recent important developments. What is new in the Third Edition? A comprehensive treatment of new materials (meta- and nano-) and their impact on EMC Numerical modelling of complex systems and complexity reduction methods Impact of wireless technologies and the Internet of Things (IoT) on EMC Testing in reverberation chambers, and in the time-domain A comprehensive treatment of the scope and development of stochastic models for EMC EMC issues encountered in automotive, railway, aerospace, and marine applications Impact of EMC and Intentional EMI (IEMI) on infrastructure, and risk assessment In addition to updating material, new references, examples, and appendices were added to offer further support to readers interested in exploring further. As in previous editions, the emphasis is on building a sound theoretical framework, and demonstrating how it can be turned to practical use in challenging applications. The expectation is that this approach will serve EMC engineers through the inevitable future technological shifts and developments.
2016 International Conference on Electrical Engineering and Automation (EEA2016) was held in Hong Kong, China from June 24th-26th, 2016. EEA2016 has provided a platform for leading academic scientists, researchers, scholars and students around the world, to get together to compare notes, and share their results and findings, in areas of Electronics Engineering and Electrical Engineering, Materials and Mechanical Engineering, Control and Automation Modeling and Simulation, Testing and Imaging, Robotics, Actuating and Sensoring.The conference had received a total of 445 submissions. However, after peer review by the Technical Program Committee only 129 were selected to be included in this conference proceedings; based on their originality, ability to test ideas, and contribution to the understanding and advancement in Electronics and Electrical Engineering.