Download Free Cnca 00c 004 2013 China Compulsory Certification Ccc Regulations Cnca 00c 004 2013 Cnca 00c 0042013 Cnca 00c 0042013 Translated English Book in PDF and EPUB Free Download. You can read online Cnca 00c 004 2013 China Compulsory Certification Ccc Regulations Cnca 00c 004 2013 Cnca 00c 0042013 Cnca 00c 0042013 Translated English and write the review.

In order to shorten the compulsory product certification and testing cycle, reduce the cost of certification testing, reduce the burden on the factory, and avoid repeated evaluation, under the premise that the certification risk is controllable and the certification quality is guaranteed, if the specific requirements are met, and the testing resources (such as personnel, facilities, etc.) of laboratory of manufacturing enterprise have the testing ability of corresponding products and specific items, and the products applying for compulsory certification may have obtained other certifications or the factory has obtained system certification, compulsory product certification can use the factory own testing resources to replace all or part of the test items for sample testing in the laboratory designated by CCC, or to recognize the evaluation results (test, inspection, or review results) of the same content of other certifications. To standardize the above two types of activities, this Implementation Rules is formulated.
In accordance with the requirements of Administrative Measures for China Compulsory Certification, the certification body shall implement classification management and effective follow-up inspection of certified products and their manufacturing enterprises, control and verify the consistency of the certified products and the type test samples, and that the quality assurance capability of manufacturing enterprises continues to meet certification requirements. To avoid large deviations in the manufacturing enterprise classification management and certification mode selection when implementing compulsory certification by different certification bodies, this Implementation Rules is formulated to clarify relevant requirements, and to ensure that certification bodies, when preparing certification implementation detailed-rules and implementing compulsory certification and after-certification supervision, accurately grasp the basic working principles and requirements for manufacturing enterprise classification management and certification mode selection and determination.
According to the requirements of the China Compulsory Certification Management Method, in the factory inspection activities, the designated certification body shall check the quality assurance capacity of the product manufacturing enterprise, the consistency of the products with the type test samples. This Implementation Rules is formulated for the purpose of regulating compulsory certification factory inspection activities, guiding the consistency of the implementation of factory inspection work by the designated certification body, and ensuring the pertinence and effectiveness of factory inspection activities.
This Rules is established based on the safety risk and certification risk of automobile products; stipulates the basic principles and requirements for compulsory certification of all vehicles within its scope of application. Its purpose is to ensure that certified vehicles continue to comply with laws, regulations, and standards.
According to the requirements of the China Compulsory Certification Management Method, the manufacturing enterprise shall control the consistency of the certified products, and its quality assurance capacity shall sustain the compliance with the certification requirements. This Implementation Rules is formulated for the purpose of normatively guiding the manufacturing enterprise of the products in the China Compulsory Certification (CCC certification) catalog to establish quality assurance capacity to ensure that the products sustain the compliance with the CCC certification requirements.
This Rules applies to products that are assessed by self-declaration in China Compulsory Certification catalogue. This Rules stipulates the definitions, self-declaration procedures, conformity information submission and self-declaration requirements, CCC mark, post-market supervision, and responsibilities and obligations of related parties, etc. for the self-declaration assessment method of China Compulsory Certification.
In order to ensure the standardization and effectiveness of compulsory certification, this is formulated according to Compulsory Product Certification Implementation Rules - Interior Trim Parts for Motor Vehicle (CNCA-C11-09:2014) (hereinafter refers to as the Implementation Rules) and CNCA Compulsory Product General Implementation Rules, including Compulsory Product Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination (CNCA-00C-003), Compulsory Product Certification Implementation Rules - Utilization of Manufacturing Enterprise Test Resources and Other Certification Results (CNCA-00C-004), Compulsory Product Certification Implementation Rules - Factory Quality Assurance Capability Requirements (CNCA-00C-005), and Compulsory Product Certification Implementation Rules - Factory Inspection General Requirements (CNCA-00C-006) and quality manuals, procedure documents and operation instructions of China Certification Centre for Automotive Products (CCAP). It is used to support the Implementation Rules as a supportive document.
This Provisions applies to the implementation and management of ODM model compulsory product certification (excluding security and fire protection products). The related definitions of ODM model are as follows: ODM factory: A factory which designs, processes, and produces the same products for one or more manufacturers by using the same quality assurance capability requirements, the same product design, production process control and inspection requirements, etc. ODM initial certification certificate holder: An organization which holds the initial CCC certification certificate of ODM product. ODM model: A commissioned manufacturing model where the ODM factory, in accordance with the documents such as relevant agreements with the manufacturer, designs, processes, and produces products for the manufacturer.
This standard is established based on the safety risk and certification risk of safety-belts of motor vehicles. It stipulates the basic principles and requirements for the implementation of China Compulsory Certification for safety-belts of motor vehicles.
This Rules is applicable to motorcycle products on Chinese highways and urban roads. Due to the adjustment of the scope of application caused by changes in laws, regulations, or relevant product standards, technical and industrial policies, etc., the announcements released by CNCA shall be final and conclusive.