Download Free Closed Loop Nominal And Abort Atmospheric Ascent Guidance For Rocket Powered Launch Vehicles Book in PDF and EPUB Free Download. You can read online Closed Loop Nominal And Abort Atmospheric Ascent Guidance For Rocket Powered Launch Vehicles and write the review.

An advanced ascent guidance algorithm for rocket-powered launch vehicles is developed. The ascent guidance function is responsible for commanding attitude, throttle and setting during the powered ascent phase of flight so that the vehicle attains target cutoff conditions in a near-optimal manner while satisfying path constraints such as maximum allowed bending moment and maximum allowed axial acceleration. This algorithm cyclically solves the calculus-of-variations two-point boundary-value problem starting at vertical rise completion through orbit insertion. This is different from traditional ascent guidance algorithms which operate in an open-loop mode until the high dynamic pressure portion of the trajectory is over, at which time there is a switch to a closed loop guidance mode that operates under the assumption of negligible aerodynamic forces. The main contribution of this research is an algorithm of the predictor-corrector type wherein the state/costate system is propagated with known (navigated) initial state and guessed initial costate to predict the state/costate at engine cutoff. The initial costate guess is corrected, using a multi-dimensional Newton?s method, based on errors in the terminal state constraints and the transversality conditions. Path constraints are enforced within the propagation process. A modified multiple shooting method is shown to be a very effective numerical technique for this application. Results for a single stage to orbit launch vehicle are given. In addition, the formulation for the free final time multi-arc trajectory optimization problem is given. Results for a two-stage launch vehicle burn-coast-burn ascent to orbit in a closed-loop guidance mode are shown. An abort to landing site formulation of the algorithm and numerical results are presented. A technique for numerically treating the transversality conditions is discussed that eliminates part of the analytical and coding burden associated with optimal control theory.
This dissertation focuses on the development of a closed-loop endo-atmospheric ascent guidance algorithm for the 2nd generation reusable launch vehicle. Special attention has been given to the issues that impact on viability, complexity and reliability in on-board implementation. The algorithm is called once every guidance update cycle to recalculate the optimal solution based on the current flight condition, taking into account atmospheric effects and path constraints. This is different from traditional ascent guidance algorithms which operate in a simple open-loop mode inside atmosphere, and later switch to a closed-loop vacuum ascent guidance scheme. The classical finite difference method is shown to be well suited for fast solution of the constrained optimal three-dimensional ascent problem. The initial guesses for the solutions are generated using an analytical vacuum optimal ascent guidance algorithm. Homotopy method is employed to gradually introduce the aerodynamic forces to generate the optimal solution from the optimal vacuum solution. The vehicle chosen for this study is the Lockheed Martin X-33 lifting-body reusable launch vehicle. To verify the algorithm presented in this dissertation, a series of open-loop and closed-loop tests are performed for three different missions. Wind effects are also studied in the closed-loop simulations. For comparison, the solutions for the same missions are also obtained by two independent optimization softwares. The results clearly establish the feasibility of closed-loop endo-atmospheric ascent guidance of rocket-powered launch vehicles. ATO cases are also tested to assess the adaptability of the algorithm to autonomously incorporate the abort modes.
Recent, interests in responsive launch have highlighted the need for rapid and fully automated ascent guidance planning and guidance parameter generation for launch vehicles. This dissertation aims at developing methodology and algorithms for on-demand generation of optimal launch vehicle ascent trajectories from lift-off to achieving targeting conditions outside the atmosphere. The entire ascent trajectory from lift-off to final target point is divided into two parts: atmospheric ascent portion and vacuum ascent portion. The two portions are integrated via a fixed-point iteration based on the continuity condition at the switch point between atmospheric ascent portion and vacuum ascent portion. The previous research works on closed-loop endo-atmospheric ascent guidance shows that the classical finite difference method is well suited for fast solution of the constrained optimal three-dimensional ascent problem. The exploitation of certain unique features in the integration procedure between the atmospheric portion and vacuum portion and the finite difference method, allows us to cast the atmospheric ascent problem into a nested fixed-point iteration problem. Therefore a novel Fixed-Point Iteration algorithm is presented for solving the endo-atmospheric ascent guidance problem. Several approaches are also provided for facilitating the convergence of the fixed-point iteration. The exo-atmospheric ascent portion allows an optimal coast in between the two vacuum powered stages. The optimal coast enables more efficient usage of the propellant. The Analytical Multiple-Shooting algorithm is developed to find the optimal trajectory for this portion. A generic launch vehicle model is adopted in the numerical simulation. A series of open-loop and closed-loop simulations are performed. The results verify the effectiveness, robustness and reliability of the Fixed-Point Iteration (FPI) algorithm and Analytical Multiple-Shooting (AMS) algorithm developed in this research. In comparison to Finite Difference (FD) algorithm, the Fixed-Point Iteration algorithm is more adaptive to the "cold start" case for endo-atmospheric ascent guidance. The simulations also validate the feasibility of the methodology presented in this research in rapid panning and guidance for ascent through atmosphere.
"This project sets out to identify and address the need for adaptive ascent guidance techniques necessary for responsive launch. This report provides comprehensive details to two recent advanced ascent guidance algorithms, tailored to endo-atmospheric and exo-atmospheric optimal ascent with possibly multiple stages, respectively. These algorithms generate optimal ascent guidance commands based on the current state of the vehicle, the currently selected targeting condition, and available vehicle/environment modeling and wind information. The algorithms depend on no vehicle-specific characteristics therefore are applicable to different types of launch vehicles without the need for significantly modifying the software. Verification, validation and extensive testing of the algorithms are performed with many mission scenarios and a number of different launch vehicle configurations, including winged reusable and conventional expandable, single-stage and multiple-stage, launch vehicles. This work demonstrates that promising techniques and algorithms have reached a level where launch ascent planning can benefit from automation based on these advances to significantly reduce ascent guidance planning time and potential realization of fully closed-loop optimal ascent guidance from liftoff to orbital insertion is possible."--Report documentation page.
Inhaltsangabe:Abstract: This thesis presents improvements to FLOAT, a hybrid analytical/numerical algorithm for rapid generation of three dimensional, optimal launch vehicle ascent trajectories. Improvements have been made to the terminal constraints, which are now available in a more general form to allow for an optimal attachment point to the target orbit.The existing algorithm also has been extended with logic that allows for vehicles with low thrust to weight ratios in the upper stage and successful convergence of problems with path constraints for normal force and angle of attack Another major extension made to the code is the introduction of coasting arcs. Coasting arcs are implemented using a completely analytical solution for the prediction of states and costates as well as for the required sensitivity matrix. This allows for a very fast and accurate calculation even with long coasting arcs. Finally, an approach for the optimization of start and end time of coast arcs is presented.This approach was implemented and the results of a test case compare very well with results generated with OTIS for the same case. At the end, suggestions for future development are made. Inhaltsverzeichnis:Table of Contents: Summaryi Acknowledgementsii Contentsiii Nomenclaturev Figuresviii Introduction1 1.Problem description3 1.1Describing the final orbit3 1.2Coordinate frame5 1.3Dynamic system6 1.4Initial conditions7 1.5Path constraints7 1.6Performance index7 1.7Terminal constraints8 1.8Solution method8 1.9Non-dimensionalization of the variables9 2.Solving the two-point boundary value problem10 2.1Vacuumsolution10 2.1.1Simplified model equations10 2.1.2Optimal control for vacuum solution11 2.1.3Thrust integrals and closed form solution for ascent in vacuum12 2.2Atmospheric solution13 2.2.1Dynamic system and collocation variables13 2.2.2Optimality condition to solve for 1b14 2.2.3Differential equations for the costate variables16 2.3Terminal constraints16 2.3.1Attaching at perigee17 2.3.2Free attachment point17 2.4Transversality conditions18 2.4.1Final costates for attaching at perigee18 2.4.2Final costates for free attachment point19 2.4.3Equatorial orbits22 2.5Adjusting final time22 2.6Computation procedure23 2.7Numerical results24 3.Low thrust upper stages27 3.1Typical low thrust case27 3.2Problems with low thrust upper stages28 3.3Upper stage modification30 3.4Advantage of free attachment point for low thrust [...]