Download Free Characterization Of Smoke Plume Emissions And Dynamics From Prescribed And Wildland Fires Using High Resolution Field Observations And A Coupled Fire Atmosphere Model Book in PDF and EPUB Free Download. You can read online Characterization Of Smoke Plume Emissions And Dynamics From Prescribed And Wildland Fires Using High Resolution Field Observations And A Coupled Fire Atmosphere Model and write the review.

Smoke plumes associated with wildland fires are difficult to characterize due to the non-linear behavior of the variables involved. Plume chemistry is largely modeled using emission factors to represent the relative trace gas and aerosol species emitted. Plume dynamics are modeled based on assumptions of plume vertical distribution and atmospheric dispersion. In the studies presented here, near and in-source measurements of emissions from prescribed burns are used to characterize the variability of emission factors from low-intensity fires. Emissions factors were found to be in the same range as those from other, similar studies in the literature and it appears that the emission factors may be sensitive to small differences in surface conditions such as fuel moisture, surface wind speed, and the ratio of live to dead fuels. We also used two coupled fire atmosphere models, which utilize the Weather Research and Forecasting (WRF) model called WRF-Fire and WRF-Sfire, to investigate the role that atmospheric stability plays in influencing plume rise as well as developing a technique for assessing plume rise and the vertical distribution of pollutants in regional air quality models. Plume heights, as well as rate of growth of the fire, were found to be sensitive to atmospheric stability while fire rate of spread was not. The plume center-of-mass technique was demonstrated to work well but has slightly low estimates compared to observations.
This publication of the AMS contains all the lectures that were presented at the AMS Workshop on Meteorology and Environmental Assessment held in Boston, MA on September 29-October 3, 1975. Topics include: The dispersion of materials in the atmospheric boundary layer, atmospheric dispersion models for environmental pollution applications, plume rise predictions, turbulent diffusion and pollutant transport in shoreline environments, urban diffusion problems, atmospheric transformations of pollutants, observational systems and techniques in air pollution meteorology, and federal government requirements for environmental impact assessment.
Landscape Fire, Smoke, and Health Linking Biomass Burning Emissions to Human Well-Being Where and when wildfires occur, what pollutants they emit, how the chemistry of smoke changes in the atmosphere, and what impact this air pollution has on human health and well-being are questions explored across different scientific disciplines. Landscape Fire, Smoke, and Health: Linking Biomass Burning Emissions to Human Well-Being is designed to create a foundational knowledge base allowing interdisciplinary teams to interact more effectively in addressing the impacts of air pollution from biomass burning on human health. Volume highlights include: Core concepts, principles, and terminology related to smoke and air quality used in different disciplines Observational and modeling tools and approaches in fire science Methods to sense, model, and map smoke in the atmosphere Impacts of biomass burning smoke on the health and well-being of children and adults Perspectives from researchers, modelers, and practitioners Case studies from different countries Information to support decision-making and policy The American Geophysical Union promotes discovery in Earth and space science for the benefit of humanity. Its publications disseminate scientific knowledge and provide resources for researchers, students, and professionals.
This open access book synthesizes current information on wildland fire smoke in the United States, providing a scientific foundation for addressing the production of smoke from wildland fires. This will be increasingly critical as smoke exposure and degraded air quality are expected to increase in extent and severity in a warmer climate. Accurate smoke information is a foundation for helping individuals and communities to effectively mitigate potential smoke impacts from wildfires and prescribed fires. The book documents our current understanding of smoke science for (1) primary physical, chemical, and biological issues related to wildfire and prescribed fire, (2) key social issues, including human health and economic impacts, and (3) current and anticipated management and regulatory issues. Each chapter provides a summary of priorities for future research that provide a roadmap for developing scientific information that can improve smoke and fire management over the next decade.
This state-of-knowledge review about the effects of fire on air quality can assist land, fire, and air resource managers with fire and smoke planning, and their efforts to explain to others the science behind fire-related program policies and practices to improve air quality. Chapter topics include air quality regulations and fire; characterization of emissions from fire; the transport, dispersion, and modeling of fire emissions; atmospheric and plume chemistry; air quality impacts of fire; social consequences of air quality impacts; and recommendations for future research.
Eulerian chemical transport models are extensively used to steer environmental policy, forecast air quality and study atmospheric processes. However, the ability of these models to simulate concentrated atmospheric plumes, including fire-related smoke, may be limited. Wildland fires are important sources of air pollutants and can significantly affect air quality. Emissions released in wildfires and prescribed burns have been known to substantially increase the air pollution burden at urban locations across large regions. Air quality forecasts generated with numerical models can provide valuable information to environmental regulators and land managers about the potential impacts of fires. Eulerian models present an attractive framework to simulate the transport and transformation of fire emissions. Still, the limitations inherent to chemical transport models when applied to replicate smoke plumes must be identified and well understood to adequately interpret results and further improve the models' predictive skills. Here, a modeling framework centered on the Community Multiscale Air Quality modeling system (CMAQ) is used to simulate several fire episodes that occurred in the Southeastern U.S. and investigate the sensitivity of fine particulate matter concentration predictions to various model inputs and parameters. Significant sources of uncertainty in the model are identified and discussed, including the spatiotemporal allocation of fire emissions and meteorological drivers. In addition, special attention is given to model grid resolution. Adaptive grid modeling is explored as a strategy to simulate fire-related plumes. An adaptive version of CMAQ, capable of dynamically restructuring the grid on which solution fields are estimated and providing refinement at the regions where accuracy is most dependent on resolution, is presented. The fully adaptive three-dimensional modeling technique can be applied to reach unprecedented levels of grid resolution and provide insight into plume dynamics unattainable with static grid models. Through this work the capability of current chemical transport models to replicate fire-related air quality impacts is evaluated, key research needs to achieve effective simulations are identified, and numerical tools designed to improve model performance are developed.
Land managers are increasingly implementing strategies that employ the use of fire in prescribed burns to sustain ecosystems and plan to sustain the rate of increase in its use over the next five years. In planning and executing expanded use of fire in wildland treatment it is important to estimate the human health and safety consequences, property damage, and the extent of visibility degradation from the resulting conflagration-pyrolysis gases, soot and smoke generated during flaming, smoldering and/or glowing fires. Traditional approaches have often employed the analysis of weather observations and forecasts to determine whether a prescribed burn will affect populations, property, or protected Class I areas. However, the complexity of the problem lends itself to advanced PC-based models that are simple to use for both calculating the emissions from the burning of wildland fuels and the downwind dispersion of smoke and other products of pyrolysis, distillation, and/or fuels combustion. These models will need to address the effects of residual smoldering combustion, including plume dynamics and optical effects. In this paper, we discuss a suite of tools that can be applied for analyzing dispersion. These tools include the dispersion models FIREPLUME and SMOKE, together with the meteorological preprocessor SEBMET.
Prescribed burning is an important tool throughout Southern forests, grasslands, and croplands. The need to control fire became evident to allow forests to regenerate. This manual is intended to help resource managers to plan and execute prescribed burns in Southern forests and grasslands. A new appreciation and interest has developed in recent years for using prescribed fire in grasslands, especially hardwood forests, and on steep mountain slopes. Proper planning and execution of prescribed fires are necessary to reduce detrimental effects, such as the impacts on air and downstream water quality. Check out these related products: Trees at Work: Economic Accounting for Forest Ecosystem Services in the U.S. South can be found here: https://bookstore.gpo.gov/products/trees-work-economic-accounting-forest-ecosystem-services-us-south Soil Survey Manual 2017 is available here: https://bookstore.gpo.gov/products/soil-survey-manual-march-2017 Quantifying the Role of the National Forest System Lands in Providing Surface Drinking Water Supply for the Southern United States is available here: https://bookstore.gpo.gov/products/quantifying-role-national-forest-system-lands-providing-surface-drinking-water-supply Fire Management Today print subscription is available here: https://bookstore.gpo.gov/products/fire-management-today Wildland Fire in Ecosystems: Fire and Nonnative Invasive Plants can be found here: https://bookstore.gpo.gov/products/wildland-fire-ecosystems-fire-and-nonnative-invasive-plants
Particulate Matter Science for Policy Makers: A NARSTO Assessment was commissioned by NARSTO, a cooperative public-private sector organization of Canada, Mexico and the United States. It is a concise and comprehensive discussion of the current understanding by atmospheric scientists of airborne particulate matter (PM). Its goal is to provide policy makers who implement air-quality standards with this relevant and needed scientific information. The primary audience for this volume will be regulators, scientists, and members of industry, all of whom have a stake in effective PM management. It will also inform exposure and health scientists, who investigate causal hypotheses of health impacts, characterize exposure, and conduct epidemiological and toxicological studies.