Download Free Characterization Of Radio Propagation Channel In Industrial Systems Book in PDF and EPUB Free Download. You can read online Characterization Of Radio Propagation Channel In Industrial Systems and write the review.

[ANGLÈS] Wireless sensing is increasingly demanded, especially in harsh industrial environments. Within the presented work a measurement prototype to check the feasibility of wireless sensing in harsh industrial environments was developed. Therefore appropriate antennas were designed to transmit and receive the wireless measurement signal. A software program was developed for data acquisition and controlling the measurement equipment. Furthermore algorithms for data analysis were implemented.
While there are numerous books describing modern wireless communication systems that contain overviews of radio propagation and radio channel modelling, there are none that contain detailed information on the design, implementation and calibration of radio channel measurement equipment, the planning of experiments and the in depth analysis of measured data. The book would begin with an explanation of the fundamentals of radio wave propagation and progress through a series of topics, including the measurement of radio channel characteristics, radio channel sounders, measurement strategies, data analysis techniques and radio channel modelling. Application of results for the prediction of achievable digital link performance would be discussed with examples pertinent to single carrier, multi-carrier and spread spectrum radio links. This work would address specifics of communications in various different frequency bands for both long range and short range fixed and mobile radio links.
A comprehensive reference giving a thorough explanation of propagation mechanisms, channel characteristics results, measurement approaches and the modelling of channels Thoroughly covering channel characteristics and parameters, this book provides the knowledge needed to design various wireless systems, such as cellular communication systems, RFID and ad hoc wireless communication systems. It gives a detailed introduction to aspects of channels before presenting the novel estimation and modelling techniques which can be used to achieve accurate models. To systematically guide readers through the topic, the book is organised in three distinct parts. The first part covers the fundamentals of the characterization of propagation channels, including the conventional single-input single-output (SISO) propagation channel characterization as well as its extension to multiple-input multiple-output (MIMO) cases. Part two focuses on channel measurements and channel data post-processing. Wideband channel measurements are introduced, including the equipment, technology and advantages and disadvantages of different data acquisition schemes. The channel parameter estimation methods are then presented, which include conventional spectral-based estimation, the specular-path-model based high-resolution method, and the newly derived power spectrum estimation methods. Measurement results are used to compare the performance of the different estimation methods. The third part gives a complete introduction to different modelling approaches. Among them, both scattering theoretical channel modelling and measurement-based channel modelling approaches are detailed. This part also approaches how to utilize these two modelling approaches to investigate wireless channels for conventional cellular systems and some new emerging communication systems. This three-part approach means the book caters for the requirements of the audiences at different levels, including readers needing introductory knowledge, engineers who are looking for more advanced understanding, and expert researchers in wireless system design as a reference. Presents technical explanations, illustrated with examples of the theory in practice Discusses results applied to 4G communication systems and other emerging communication systems, such as relay, CoMP, and vehicle-to-vehicle rapid time-variant channels Can be used as comprehensive tutorial for students or a complete reference for engineers in industry Includes selected illustrations in color Program downloads available for readers Companion website with program downloads for readers and presentation slides and solution manual for instructors Essential reading for Graduate students and researchers interested in the characteristics of propagation channel, or who work in areas related to physical layer architectures, air interfaces, navigation, and wireless sensing
Ultra Wide Band (UWB) technology consists of transmitting radio signals over frequency bandwidths from 500 MHz to several GHz. Its unique characteristics may be exploited for the design of high data rate wireless communication systems, as well as localization and imaging applications. The development and optimization of such systems require a precise knowledge of the radio transmission medium. This book examines all aspects of the propagation channel for UWB systems. UWB technology is first presented, with a particular emphasis being placed on its applications, spectrum regulation issues, and the different communication techniques. The authors introduce the theoretical bases of radioelectric propagation and give an overview of the channel sounding techniques adapted for UWB signals. The two main principles of UWB channel modeling are finally exposed and illustrated: deterministic channel modeling, based on the simulation of the propagation phenomena in a given environment, and statistical channel modeling, which relies on the experimental analysis of the main channel characteristics.
This book offers comprehensive, practical guidance on RF propagation channel characterization at mmWave and sub-terahertz frequencies, with an overview of both measurement systems and current and future channel models. It introduces the key concepts required for performing accurate mmWave channel measurements, including channel sounder architectures, calibration methods, channel sounder performance metrics and their relationship to propagation channel characteristics. With a comprehensive introduction to mmWave channel models, the book allows readers to carefully review and select the most appropriate channel model for their application. The book provides fundamental system theory accessible in a step by step way with clear examples throughout. With inter- and multidisciplinary perspectives, the reader will observe the tight interaction between measurements and modeling for these frequency bands and how different disciplines interact. This is an excellent reference for researchers, including graduate students, working on mmWave and sub-THz wireless communications, and for engineers developing communication systems.
Radio frequency (RF) propagation measurements were conducted at three facilities representing a cross-section of different classes of industrial environments. Selected sites included a multi-acre transmission assembly factory typical of the automotive industry; a medium-sized machine shop primarily engaged in metalworking located on the NIST campus in Gaithersburg; and a steam generation plant located on the NIST campus in Boulder. A spread spectrum correlation sounder was used to take the measurements at a continuum of points throughout the facility by fixing the transmitter and moving the receiver at a constant rate throughout each facility. We analyzed the data collected from the RF propagation measurements of each site. Analysis is based on channel impulse response (CIR) measurements collected during the measurement using equipment developed by the National Institute of Standards and Technology. The results of our analysis includes a tabulated summary and detailed exploration of various industry accepted channel metrics such as path loss, delay spread, and K factor. Our interpretation of the measurements contributes to an improved understanding of radio frequency propagation in factories and an additional perspective on deploying wireless communication devices within factories. The raw measurement data and analysis software is made freely available for public download.
A comprehensive reference giving a thorough explanation of propagation mechanisms, channel characteristics results, measurement approaches and the modelling of channels Thoroughly covering channel characteristics and parameters, this book provides the knowledge needed to design various wireless systems, such as cellular communication systems, RFID and ad hoc wireless communication systems. It gives a detailed introduction to aspects of channels before presenting the novel estimation and modelling techniques which can be used to achieve accurate models. To systematically guide readers through the topic, the book is organised in three distinct parts. The first part covers the fundamentals of the characterization of propagation channels, including the conventional single-input single-output (SISO) propagation channel characterization as well as its extension to multiple-input multiple-output (MIMO) cases. Part two focuses on channel measurements and channel data post-processing. Wideband channel measurements are introduced, including the equipment, technology and advantages and disadvantages of different data acquisition schemes. The channel parameter estimation methods are then presented, which include conventional spectral-based estimation, the specular-path-model based high-resolution method, and the newly derived power spectrum estimation methods. Measurement results are used to compare the performance of the different estimation methods. The third part gives a complete introduction to different modelling approaches. Among them, both scattering theoretical channel modelling and measurement-based channel modelling approaches are detailed. This part also approaches how to utilize these two modelling approaches to investigate wireless channels for conventional cellular systems and some new emerging communication systems. This three-part approach means the book caters for the requirements of the audiences at different levels, including readers needing introductory knowledge, engineers who are looking for more advanced understanding, and expert researchers in wireless system design as a reference. Presents technical explanations, illustrated with examples of the theory in practice Discusses results applied to 4G communication systems and other emerging communication systems, such as relay, CoMP, and vehicle-to-vehicle rapid time-variant channels Can be used as comprehensive tutorial for students or a complete reference for engineers in industry Includes selected illustrations in color Program downloads available for readers Companion website with program downloads for readers and presentation slides and solution manual for instructors Essential reading for Graduate students and researchers interested in the characteristics of propagation channel, or who work in areas related to physical layer architectures, air interfaces, navigation, and wireless sensing
Comprehensive resource describing both fundamentals and practical industry applications of antennas and radio propagation employed in modern wireless communication systems The newly revised and thoroughly updated Third Edition of this classic and popular text, Antennas and Propagation for Wireless Communication Systems addresses fundamentals and practical applications of antennas and radio propagation commonly used in modern wireless communication systems, from the basic electromagnetic principles to the characteristics of the technology employed in the most recent systems deployed, with an outlook of forthcoming developments in the field. Core topics include fundamental electromagnetic principles underlying propagation and antennas, basic concepts of antennas and their application to specific wireless systems, propagation measurement, modelling, and prediction for fixed links, macrocells, microcells, femtocells, picocells, megacells, and narrowband and wideband channel modelling with the effect of the channel on communication system performance. Worked examples and specific assignments for students are presented throughout the text (with a solutions manual available for course tutors), with a dedicated website containing online calculators and additional resources, plus details of simple measurements that students can perform with off-the-shelf equipment, such as their laptops and a Wi-Fi card. This Third Edition of Antennas and Propagation for Wireless Communication Systems has been thoroughly revised and updated, expanding on and adding brand new coverage of sample topics such as: Maxwell’s equations and EM theory, multiple reflections as propagation mechanisms, and waveguiding HAPS (High Altitude Platforms) propagation, design and noise considerations of earth stations, macrocell models, and cellular base station site engineering FSS (frequency selective surfaces), adaptive antenna theory developments (massive and distributed MIMO in particular), and how to process raw data related to channel measurements for mobile radio systems The techniques used in mobile systems spanning the latest 4G, 5G and 6G technology generations A wider range of frequencies, extending from HF, VHF and UHF up to the latest millimetre wave and sub terahertz bands With comprehensive coverage of foundational subject matter as well as major recent advancements in the field, Antennas and Propagation for Wireless Communication Systems is an essential resource for undergraduate and postgraduate students, researchers, and industry engineers in related disciplines.
Inclusive Radio Communication Networks for 5G and Beyond is based on the COST IRACON project that consists of 500 researchers from academia and industry, with 120 institutions from Europe, US and the Far East involved. The book presents state-of-the-art design and analysis methods for 5G (and beyond) radio communication networks, along with key challenges and issues related to the development of 5G networks. Covers the latest research on 5G networks – including propagation, localization, IoT and radio channels Based on the International COST research project, IRACON, with 120 institutions and 500 researchers from Europe, US and the Far East involved Provides coverage of IoT protocols, architectures and applications, along with IoT applications in healthcare Contains a concluding chapter on future trends in mobile communications and networking