Download Free Characterization Of Heavy Duty Motor Vehicle Emissions Under Transient Driving Conditions Book in PDF and EPUB Free Download. You can read online Characterization Of Heavy Duty Motor Vehicle Emissions Under Transient Driving Conditions and write the review.

Apportionment of air pollution to sources requires knowledge of source emission strengths and/or chemical and physical characteristics. The literature is deficient in data useful for this purpose for heavy-duty motor vehicles, which can be important sources of air pollution in select microenvironments. Emission factors are developed in this study for heavy-duty gasoline trucks using chassis dynamometer simulations of urban driving conditions. The sensitivity of the emissions to such considerations as the characteristics of the speed-time driving schedule, vehicle payload, and chassis configuration are examined. Emissions characterization includes total and individual hydrocarbons, aldehydes, carbon monoxide, oxides of nitrogen, total particulate matter, particulate organics, lead, bromine, chlorine, and the fraction of total particulate less than 2 microns. Preliminary comparisons of emissions obtained using transient engine and transient chassis test procedures are also reported.
Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. This study is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. On September 15, 2011, NHTSA and EPA finalized joint Phase I rules to establish a comprehensive Heavy-Duty National Program to reduce greenhouse gas emissions and fuel consumption for on-road medium- and heavy-duty vehicles. As NHTSA and EPA began working on a second round of standards, the National Academies issued another report, Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two: First Report, providing recommendations for the Phase II standards. This third and final report focuses on a possible third phase of regulations to be promulgated by these agencies in the next decade.
Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.