Download Free Cavitation And The Centrifugal Pump Book in PDF and EPUB Free Download. You can read online Cavitation And The Centrifugal Pump and write the review.

This practical reference describes the occurrence of cavitation in a centrifugal pump, and how unacceptable cavitation can be avoided. It explains cavitation problems such as hydraulic performance loss, hydrodynamically or thermodynamically induced surging, and cavitation erosion. General guidelines for acceptable operation conditions, such as, net positive suction head (NPSH) margins and minimum flowrates, are presented along with evidence and logic for these proposed guidelines.
Cavitation in a centrifugal pump often limits performance or compromises safe operation. This practical reference provides engineers with clear and comprehensive insight into the occurrence of cavitation in a centrifugal pump. By developing an understanding of how cavitation affects pump operation in measurable terms, the book demonstrates how unacceptable cavitation can be avoided. Such industrially significant cavitation problems include hydraulic performance loss, hydrodynamically or thermodynamically induced surging, and cavitation erosion.
Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.
This practical reference describes the occurrence of cavitation in a centrifugal pump, and how unacceptable cavitation can be avoided. It explains cavitation problems such as hydraulic performance loss, hydrodynamically or thermodynamically induced surging, and cavitation erosion. General guidelines for acceptable operation conditions, such as, net positive suction head (NPSH) margins and minimum flowrates, are presented along with evidence and logic for these proposed guidelines.
This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The discussions of vibrations, noise, unsteady flow phenomena, stability, hydraulic excitation forces and cavitation have been significantly enhanced. To ease the use of the information, the methods and procedures for the various calculations and failure diagnostics discussed in the text are gathered in about 150 pages of tables which may be considered as almost unique in the open literature. The text focuses on practical application in the industry and is free of mathematical or theoretical ballast. In order to find viable solutions in practice, the physical mechanisms involved should be thoroughly understood. The book is focused on fostering this understanding which will benefit the pump engineer in industry as well as academia and students.
Pumps are commonly encountered in industry and are essential to the smooth running of many industrial complexes. Mechanical engineers entering industry often have little practical experience of pumps and their problems, and need to build up an understanding of the design, operation and appropriate use of pumps, plus how to diagnose faults and put them right. This book tackles all these aspects in a readable manner, drawing on the authors' long experience of lecturing and writing on centrifugal pumps for industrial audiences.
This book presents a collection of the best papers from the Seventh Asian Joint Workshop on Thermophysics and Fluid Science (AJWTF7 2018), which was held in Trivandrum, India, in November 2018. The papers highlight research outputs from India, China, Japan, Korea and Bangladesh, and many of them report on collaborative efforts by researchers from these countries. The topics covered include Aero-Acoustics, Aerodynamics, Aerospace Engineering, Bio-Fluidics, Combustion, Flow Measurement, Control and Instrumentation, Fluid Dynamics, Heat and Mass Transfer, Thermodynamics, Mixing and Chemically Reacting Flows, Multiphase Flows, Micro/Nano Flows, Noise/NOx/SOx Reduction, Propulsion, Transonic and Supersonic Flows, and Turbomachinery. The book is one of the first on the topic to gather contributions from some of the leading countries in Asia. Given its scope, it will benefit researchers and students working on research problems in the thermal and fluid sciences.
Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.
Centrifugal and Rotary Pumps offers both professionals and students a concise reference detailing the design, performance, and principles of operation of the different pumps types defined by the Hydraulic Institute. From historical background to the latest trends and technological developments, the author focuses on information with real-world prac
This last, the education of pump users, is precisely what this book was intended to do. To what extent we must have achieved our purpose, our readers must decide. My good friend and associate, J. T. (Terry) McGuire, and I have been working very closely together for a long time. Our view of engineering problems and of their solutions coincide to an astonishing degree. When I was asked to prepare a second edition of my book Centrifugal Pumps, it was logical that I turned to Terry and suggested that he be my coauthor on this project. He agreed to do so, and his cooperation has been most valuable, both in improving the resultant work and in easing my burden. It would be presumptuous on my part to pretend that nothing has changed in the technology of centrifugal pumps during the 30 years since I prepared the manuscript for the first edition of this book. Let me, then, speak of some of these changes.