Download Free Carbon Based Nanomaterials For Advanced Thermal And Electrochemical Energy Storage And Conversion Book in PDF and EPUB Free Download. You can read online Carbon Based Nanomaterials For Advanced Thermal And Electrochemical Energy Storage And Conversion and write the review.

Carbon Based Nanomaterials for Advanced Thermal and Electrochemical Energy Storage and Conversion presents a comprehensive overview of recent theoretical and experimental developments and prospects on carbon-based nanomaterials for thermal, solar and electrochemical energy conversion, along with their storage applications for both laboratory and industrial perspectives. Large growth in human populations has led to seminal growth in global energy consumption, hence fossil fuel usage has increased, as have unwanted greenhouse gases, including carbon dioxide, which results in critical environmental concerns. This book discusses this growing problem, aligning carbon nanomaterials as a solution because of their structural diversity and electronic, thermal and mechanical properties. - Provides an overview on state-of-the-art carbon nanomaterials and key requirements for applications of carbon materials towards efficient energy storage and conversion - Presents an updated and comprehensive review of recent work and the theoretical aspects on electrochemistry - Includes discussions on the industrial production of carbon-based materials for energy applications, along with insights from industrial experts
Hybrid Atomic-Scale Interface Design for Materials Functionality covers a broad range of atomistic, meso and macro scale computational methodologies, including multiphase (hybrid) materials constructs for tailoring structural, thermal and electrical properties. As future materials are expected to perform with increasing efficiency in complex and dynamic environments hybrid materials design, in contrast to monolithic concepts, they are a cost-effective alternative. Taking materials hybridization at smaller scale, even at atomic scale, offers exceedingly high-payoff opportunities for optimizing materials functionality at reduced material consumption and even reduced qualification costs (eliminates many costly component and system level qualification tests). - Presents computational methodologies for materials hybridization and interface design at the atomic scale - Covers materials interface design (atomic configuration), a key component to optimize and achieve performance metrics - Helps readers with material selectivity and in the materials design phase of any product design
Electrochemical Sensors: From Working Electrodes to Functionalization and Miniaturized Devices provides an overview of the materials, preparation and fabrication methods for biosensor applications. The book introduces the field of electrochemistry and its fundamentals, also providing a practical overview of working electrodes as key components for the implementation of sensors and assays. Features covered include the prompt transfer of electrons, favorable redox behavior, biocompatibility, and inertness in terms of electrode fouling. Special attention is dedicated to analyzing the various working materials systems for electrodes used in electrochemical cells such as gold, carbon, copper, platinum and metal oxides. This book is suitable for academics and practitioners working in the disciplines of materials science and engineering, analytical chemistry and biomedical engineering. - Introduces key concepts for electrochemistry and biosensors - Reviews the most common and emerging materials-based electrodes for sensor applications, including gold, carbon, platinum and metal oxides - Discusses both macro and miniaturized electrodes, including their cleaning, engineering, fabrication, examples of working biosensors, and advantages and disadvantages
Titanate-centered perovskites are an important class of crystalline materials with outstanding structural and property tunability. Recently, titanate perovskites have been extensively investigated as new-generation materials for various energy-allied applications, together with photovoltaic cells, light emitting diodes, photo detectors and lasers, for their exceptional optical and electronic properties. With increasing attention on the development of nanotechnology and multidisciplinary research, scientists have been trying to downscale the titanate perovskite structures into the nanoregime, so as to further boost their performances and applications. Compared with bulk perovskite materials, perovskite nanomaterials exhibit a series of advantages, such as fabrication of thin films and flexible devices and PNMs display high process ability. Perovskite nanomaterials feature rich and controllable facets and active sites. Besides benefiting from the small-size effect and quantum effect, perovskite nanomaterials are endowed with outstanding photo-electromagnetic properties. Furthermore, the applications of titanate-centered perovskites in the fields of energy, environment, WLEDs, forensic science and piezoelectric devices will be reviewed. This book will also discuss the possible solutions to the problems in their application by optimizing their compositions, structures and preparation methods. This book will systematically summarize the key points in the design, synthesis, property improvements and application expansion of titanate-centered perovskites. The different perovskite structures and the rational design of functional materials will be discussed in detail. The advantages, disadvantages and experimental parameters of different synthesis methods for titanate-centered perovskites will be reviewed. This book will also summarize some practical experiences in selecting suitable elements and designing multifunctional materials according to the mechanisms and principles of elements promoting the properties of perovskites by covering almost last 20 years of literature. At the end of this book, we will provide an outlook on the opportunities and challenges in the view of development in titanate-centered perovskites The inclusive effectiveness and practicality of prospective titanate energy materials and systems are directly connected to many materials-related factors. This volume of book features totally seven sections that envelop a wide range of titanate energy materials. They cover the modern developments involving materials for alternative and renewable energy sources and systems, including energy storage and batteries, nanocomposites, hydrogen, solar, wind, geothermal, biomass and nuclear. The book is a significant orientation for students and researchers (from academics, but also industry) interested in understanding the properties of emerging titanate energy materials and challenges in the recent era.
Dye-Sensitized Solar Cells: Emerging Trends and Advanced Applications is highly focused on addressing all aspects of dye sensitized solar cell technology. In this book, the authors present systematic analysis and working principles and detailed studies of individual components, manufacturing methods, software assisted design surrounding the technology market, commercialization potential, and performance evaluations and detailed fabrication methods and parameters. As there is no specific book which could encircle all the aspects of dye sensitized solar cells from its very basic working principles to advanced approached to improve it efficiency, this book fills that gap. Providing a comprehensive study on dye sensitized solar cells, this reference covers basic working principles to advanced approaches in improving efficiency as well as thermodynamic and kinetic studies. It will be ideal for advanced stage researchers and engineers looking to get a grip on DSSC technology. - Provides a compilation of all-important principles and advanced research in the field of dye sensitized solar cells - Specifies constituents of each DSSC, from basic to advanced level - Details advances in fabrication and software assisted design of DSSC
Discover the go-to handbook for developers and application-oriented researchers who use carbon nanotubes in real products Carbon nanotubes have held much interest for researchers since their discovery in 1991. Due to their low mass density, large aspect ratio, and unique physical, chemical, and electronic properties, they provide a fertile ground for innovation in nanoscale applications. The development of chemical modifications that can enhance the poor dispersion of carbon nanotubes in solvents and improve interactions with other materials have enabled extensive industrial applications in a variety of fields. As the chemistry of carbon nanotubes and their functionalization becomes better understood, Chemically Modified Carbon Nanotubes for Commercial Applications presents the most recent developments of chemically modified carbon nanotubes and emphasizes the broad appeal for commercial purposes along many avenues of interest. The book reviews their already realized and prospective applications in fields such as electronics, photonics, separation science, food packaging, environmental monitoring and protecting, sensing technology, and biomedicine. By focusing on their commercialization prospects, this resource offers a unique approach to a significant and cutting-edge discipline. Chemically Modified Carbon Nanotubes for Commercial Applications readers will also find: Case studies that emphasize the information presented in each chapter Each chapter includes important websites and suggested reading materials Discussion of current applications of the relevant methodologies in every chapter A look at future perspectives in each application area to highlight the scope for next steps within the industry Chemically Modified Carbon Nanotubes for Commercial Applications is a valuable reference for material scientists, chemists (especially those focused on environmental concerns), and chemical and materials engineering scientists working in R&D and academia who want to learn more about chemically modified carbon nanotubes for various scalable commercial applications. It is also a useful resource for a broad audience: anyone interested in the fields of nanomaterials, nanoadsorbents, nanomedicine, bioinspired nanomaterials, nanotechnology, nanodevices, nanocomposites, biomedical application of nanomaterials, nano-engineering, and high energy applications.
Presents uparalleled coverage of Na-ion battery technology, including the most recent research and emerging applications Na-ion battery technologies have emerged as cost-effective, environmentally friendly alternatives to Li-ion batteries, particularly for large-scale storage applications where battery size is less of a concern than in portable electronics or electric vehicles. Scientists and engineers involved in developing commercially viable Na-ion batteries need to understand the state-of-the-art in constituent materials, electrodes, and electrolytes to meet both performance metrics and economic requirements. Sodium-Ion Batteries: Materials, Characterization, and Technology provides in-depth coverage of the material constituents, characterization, applications, upscaling, and commercialization of Na-ion batteries. Contributions by international experts discuss the development and performance of cathode and anode materials and their characterization - using methods such as NMR spectroscopy, magnetic resonance imaging (MRI), and computational studies - as well as ceramics, ionic liquids, and other solid and liquid electrolytes. Discusses the development of battery technology based on the abundant alkali ion sodium Features a thorough introduction to Na-ion batteries and their comparison with Li-ion batteries Reviews recent research on the structure-electrochemical performance relationship and the development of new solid electrolytes Includes a timely overview of commercial perspectives, cost analysis, and safety issues of Na-ion batteries Covers emerging technologies including Na-ion capacitors, aqueous sodium batteries, and Na-S batteries The handbook Sodium-Ion Batteries: Materials, Characterization, and Technology is an indispensable reference for researchers and development engineers, materials scientists, electrochemists, and engineering scientists in both academia and industry.
Polymers with redox properties are electroactive macromolecules containing localized sites or groups that can be oxidized and reduced. Depending on the oxidation state, redox polymers can present different electronic, optical, mechanical or chemical properties. These polymers are finding new applications in materials science, as well as being included in the design of a number of electrochemical devices. Redox Polymers for Energy and Nanomedicine highlights trends in the chemistry, characterization and application of polymers with redox properties. The book starts with an introduction to redox polymers and covers several important topics including redox polymer types, state-of-the-art characterization techniques, synthetic strategies and theory and computational studies. The second part is devoted to the redox polymers applied in energy and nanomedicine. First, the most important redox polymer families in energy storage are reviewed, i.e, radical, phenothiazine, carbonyl and catechol containing polymers. The book also contains recent developments in redox polymers for biofuel cells and all-organic batteries. Second, the emerging applications of redox polymers in nanomedicine technologies such as, tissue engineering, drug-delivery, actuators or biosensors are explained in detail. With contributions from global experts, the book will be of interest to graduate students and researchers working in polymer science, electrochemistry, energy research and nanomedicine.
METAL OXIDE NANOCOMPOSITE THIN FILMS FOR OPTOELECTRONIC DEVICE APPLICATIONS The book provides insight into the fundamental aspects, latest research, synthesis route development, preparation, and future applications of metal oxide nanocomposite thin films. The fabrication of thin film-based materials is important to the future production of safe, efficient, and affordable energy as the devices convert sunlight into electricity. Thin film devices allow excellent interface engineering for high-performance printable solar cells as their structures are highly reliable and stand-alone systems can provide the required megawatts. They have been used as power sources in solar home systems, remote buildings, water pumping, megawatt-scale power plants, satellites, communications, and space vehicles. Metal Oxide Nanocomposite Thin Films for Optoelectronic Device Applications covers the basics of advanced nanometal oxide-based materials, their synthesis, characterization, and applications, and all the updated information on optoelectronics. Topics discussed include the implications of metal oxide thin films, which are critical for device fabrications. It provides updated information on the economic aspect and toxicity, with great focus paid to display applications, and covers some core areas of nanotechnology, which are particularly concerned with optoelectronics and the available technologies. The book concludes with insights into the role of nanotechnology and the physics behind photovoltaics. Audience The book will be an important volume for electronics and electrical engineers, nanotechnologists, materials scientists, inorganic chemists in academic research, and those in industries, exploring the applications of nanoparticles in semiconductors, power electronics, and more.
Presenting the most relevant advances for employing carbon-based nanostructured materials for analytical purposes, this book serves as a reference manual that guides readers through the possibilities and helps when selecting the most appropriate material for targeted analytical applications. It critically discusses the role these nanomaterials can play in sample preparation, separation procedures and detection limit improvements whilst also considering the future trends in this field. Useful to direct initiatives, this book fills a gap in the literature for graduate students and professional researchers discussing the advantages and limitations across analytical chemistry in industry and academia.