Download Free Building Facades A Guide To Common Defects In Tropical Climates Book in PDF and EPUB Free Download. You can read online Building Facades A Guide To Common Defects In Tropical Climates and write the review.

Much attention has been given to the increasing number of defects on building facades in relation to the construction industry's growing use of large panel curtain walls. This book highlights the various types of defects commonly found on building facades under tropical conditions. The facade elements discussed include natural stone, glass, metal sheeting, plaster and tiling. The causes of defects, such as poor workmanship, inadequate design and maintenance, inappropriate use of materials and the action of environmental agents, are evaluated. The typical problems highlighted include cracking, water penetration, misalignment, sealant defects, discoloration, staining, efflorescence, corrosion and tile delamination. The causes of these defects and their implications for design, construction and maintenance are described. Illustrated with many photographs, this book will be a useful guide both to practising professionals and to undergraduate and graduate students.
Facade staining is a centuries-old building defect that is globally widespread. Millions of dollars are wasted annually for its rectification. A stained building looks old and worn-out, diminishing the value of the property and the confidence in occupying it. The facade's durability may also be affected by staining. Despite these wide and varying downstream implications, facade staining can actually be foreseen and prevented if conscientious efforts are made at the building's planning and design stages. This book provides insight into the underlying causes of facade staining and proposes an approach to address the root of the problem. It aims to raise awareness of crucial factors that should be understood and considered in the prevention or minimization of facade staining, hence reducing resource wastage in unnecessary maintenance work. Staining of Facades will serve as a useful guide for students as well as practitioners in related professions such as architecture, engineering, building, realestate, and project and property management, in their efforts to minimize the life-cycle costs of buildings.
In this volume scientists from different disciplines present their experience and their scientific work in progress. These concern the properties of a series of stones that have been used for the erection of some of the most important stone monuments of international cultural heritage and are also used today for substitution of missing parts or completion of damaged ones. It deals with the subject globally and contains unpublished research results.
This book presents the results of a novel investigation into building deterioration and defects in Malaysia’s public schools. It sets forth an in-depth theoretical and empirical underpinning the maintenance management of public schools with the view to develop a building deterioration prediction model of building condition based on factors contributing to building defects for school buildings. The approach adopted is mixed method encompassing archived documentation, questionnaire survey and interview of sampled schools in Malaysia. It presents a number of useful tables, graphs and statistical analysis which are useful in understanding the factors contributing to building defects under reference. The prediction model assists the decision making of maintenance management to be more efficient with comprehensive budgeting as well as optimal maintenance and repair work. The book is of relevance to school managers, maintenance management practitioners and academics towards measuring and improving the building condition in schools.
This book introduces the latest construction practices and processes for tall buildings from foundation to roof. It attempts to acquaint readers with the methods, materials, equipment and systems used for the construction of tall buildings.The text progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, merits and limitations of the various proprietary systems commonly used in these respective stages are discussed. This third edition also includes several new topics not covered in the previous edition.
This book introduces the latest construction practices and processes for tall buildings from foundation to roof. It attempts to acquaint readers with the methods, materials, equipment and systems used for the construction of tall buildings.The text progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, merits and limitations of the various proprietary systems commonly used in these respective stages are discussed. This fourth edition also includes several new topics not covered in the previous edition.The target readers are practitioners and students in the related professions including architecture, engineering, building, real estate, construction, project and facilities management, and quantity and land surveying.
This study describes current construction practices and processes for tall buildings from foundation to roof. It discusses the construction sequence of the various proprietary systems and their merits and disadvantages.
This new edition of Construction Technology for Tall Buildings comprehensively revises and expands the previous edition, incorporating new topics and many new figures. The text introduces the latest construction practices and processes for tall buildings from foundation to roof. It acquaints the reader with the methods, materials, equipment and systems used for the construction of tall buildings.The book progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, and the merits and limitations of the various proprietary systems commonly used in these stages, are discussed.The target readers are practitioners and students in the related professions, including architecture, engineering, building, real estate, project and property management, quantity and land surveying.
Zusammenfassung: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2024 collection includes contributions from the following symposia: · Alumina & Bauxite · Aluminum Alloys: Development and Manufacturing · Aluminum Reduction Technology · Electrode Technology for Aluminum Production · Melt Processing, Casting and Recycling · Scandium Extraction and Use in Aluminum Alloys
The tropical region covers a significant proportion of the globe, and yet its architecture receives relatively little outside comment or exposure. Dispersed widely throughout the world, the region incorporates areas as far-flung as the Caribbean islands, India, South-East Asia, and large parts of Australia, Africa and South and Central America. Despite their great cultural diversity, these areas share both climatic and ecological factors, as well as a post-colonial condition and the pressures of modernization in the world of globalization. Architects' reactions to the tropical context are as varied as the region is diverse. Tropical Architecture brings together architects and critics from throughout the tropical region, examining the implications of the opposing forces of tradition and innovation and the struggle between global and local order. Among the issues covered are sustainability, bio- and cultural diversity, micro-climatic control and technology and multi-disciplinary design. The argument centres on Critical Regionalism, a concept introduced into the architectural debate in the early 1980s by two of the book's co-authors, Tzonis and Lefaivre. This is not a style but rather an approach to architecture that asks for design to be conceived in response to the needs and opportunities of a specific region - although it is not inherently opposed to global potentials. The theoretical debate is backed up by case studies of a range of projects, from small-scale designs using minimal technology to super-sophisticated, high-tech solutions, and from schemes that look to environmental comfort to ones concerned with issues of symbolism and memory. It is out of this multiplicity of approaches that the general global lesson of Critical Regionalism as applied to tropical architecture is to be found. THE PRINCE CLAUS FUND stimulates and supports activities in the field of culture and development by granting awards, funding and producing publications and by financing and promoting networks and innovative cultural activities. Support is given both to persons and to organizations in African, Asian, Latin American and Caribbearn countries.