Download Free Bre Good Building Guide Book in PDF and EPUB Free Download. You can read online Bre Good Building Guide and write the review.

This guide is for builders, designers and planners. It provides rule of thumb guidance for the stable construction of a range of common types of bonded brickwork and blockwork earth retaining walls to a maximum retaine dheight of 1.725 m. Walls of greater height should be designed by an appropriately qualified person. For practical purposes, this guide provides a simplified classification of soils which are suitable to found on, and gives foundation and wall dimensions for several wall heights.
Building pathology provides an interdisciplinary approach to the study of defects and performance in order to develop appropriate remedial and management solutions. It considers how the structure and materials of a building relate to its environment, its occupants and the way the building is used, so as to develop a better understanding of building failures. This book provides a well illustrated introduction to the discipline of building pathology, bridging the gap between current approaches to the surveying of buildings and the detailed study of defect diagnosis, prognosis and remediation. It features a number of case studies and a detailed set of references and further reading. This second edition has been updated to reflect changes in legislation, guidance and construction, and provides new case studies that demonstrate the breadth and depth of the subject.
Bricks and brickwork; Blocks and blockwork; Lime, cement and concrete; Timber and timber products; Ferrous and non-ferrous metals; Bitumen and flat roofing materials; Glass; Ceramic materials; Stone and cast stone; Plastics; Glass-fibre reinforced plastics, cement and gypsum; Plaster and board materials; Insulation materials; Sealants, gaskets and adhesives; Paints, wood stains, varnishes and colour; Energy-saving materials and componets; Recycled and ecological materials; Sustainability
The HAPM Workmanship Checklists fills an important gap in the current information provision in the industry, providing guidance for those engaged in site inspections during the course of building works. Its unique checklist format, designed for use on site, is complimented by extensive references to sources of guidance, standards and legislative in
Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
An indispensable tool for all landscape architects, this time-saving guide answers the most frequently asked questions in one pocket-sized volume. It is a concise, easy-to-read reference that gives instant access to a wide range of information needed on a daily basis, both out on site and in the office. Covering all the major topics, including hard landscaping, soft landscaping as well as planning and legislation, the pocket book also includes a handy glossary of important terms, useful calculations and helpful contacts. Not only an essential tool for everyday queries on British standards and procedures, this is a first point of reference for those seeking more extensive, supplementary sources of information, including websites and further publications. This new edition incorporates updates and revisions from key planning and environmental legislation, guidelines and national standards.
"Ray Tricker and Rozz Algar explain the meaning of the regulations, their history, current status and requirements, giving associated documentation and explaining how local authorities view their importance, whilst emphasising the benefits and requirements of each one." "The information is organised by building element rather than by standard, making use of the material simple. There is no easier or clearer guide to help you comply with the Scottish Building Standards in the simplest and most cost-effective manner possible."--BOOK JACKET.
Selecting the best materials, techniques and systems for each project and then specifying them correctly to meet all the requirements of quality, time, value, constructability, maintenance and durability is a fundamental aspect of architectural design. It also helps to determine the quality and environmental impact of the project. Specifying Buildings: A Design Management Perspective provides a unique insight into the entire specification process, from selecting materials and products to writing the specification, dealing with changes and minimising risk. This new edition has been extensively revised and includes new case studies, research findings and reviews to illustrate how to translate design intent into building assembly. The book is structured to meet the needs of students on construction-related programmes such as architecture, engineering, surveying and construction management. It provides valuable insights and practical guidance, with end of chapter exercises helping students achieve a thorough understanding of the specification process
As the Building Regulations and Approved Documents have become more and more complex, they have become increasingly unfriendly for a professional user. Compliance is only possible by understanding a wide range of supporting documentation. Alternative approaches are implied, but not described or analysed. This book examines Approved Document C on Site Preparation and takes the user through all the key stages of preparation, compliance, inspection and enforcement. It offers practical advice on using not just the traditional routes to compliance but also on the alternative approaches suggested but not explained in the Approved Documents. The advantages and disadvantages of each form of compliance are analysed in depth. Everything you need to know to prepare a site's fixtures against contamination and moisture is discussed, including floors, walls, window frames, door tresholds, and roofs. This is an indispensable text for professional designers, architects, structural and other specialist engineers, building control officers and students in construction, building and architecture.