Download Free Bond Stress Slip Characteristics Of Frp Rebars Book in PDF and EPUB Free Download. You can read online Bond Stress Slip Characteristics Of Frp Rebars and write the review.

This study summarizes experimental results of the local bond stress-slip response of reinforcing bars embedded in fiber reinforced concrete (FRC) under splitting type failure. Pullout specimens were tested to study the effect of several parameters, namely, type, volume fraction, and aspect ratio of fibers, concrete cover to reinforcing bars (or splitting area surrounding the reinforcing bar), and size of reinforcing bar. The experimental results showed that the major contribution of fibers is in the post-splitting range. As compared to plain concrete, the bond behavior of fiber reinforced concrete is more ductile inasmuch as the post-splitting bond stresses are increased. This increase is function of the fiber reinforcing index and of the fiber bond characteristics. The results from the current study were combined with other results reported in technical literature and used to develop a model to describe the bond stress-slip relationship of reinforcing bars embedded in plain and FRC under splitting type failure. The model accounts for all of the important parameters that tend to influence the bond characteristics of reinforcing bar3 as observed in the experiment. It should be mentioned that this study consists the second pact of a two-phase experimental program dealing with the local bond stress-slip characteristics of reinforcing bars embedded in fiber reinforced concrete. While this current phase concentrates on the splitting type of failure, the first part of the study (Ref. 4) emphasized pullout failure.
Recently, fibre reinforced polymer (FRP) rebars have been extensively used in construction instead of steel rebars due to their non-corrosive nature and high tensile strength. Bond between FRP rebars and concrete is a critical design parameter that controls the performance of reinforced concrete members at serviceability and ultimate limit states. In order to prevent a bond failure, an adequate anchorage length should be provided. The anchorage length is derived using a bond stress-slip () constitutive law. The objective of this study is to investigate the effect of different parameters such as the type of fibre, the rebar surface and the confinement provided by the transverse reinforcement on the bond behaviour of FRP rebars in concrete. Based on the analysis, a generalized bond stress-slip relationship will be developed and a new design equation for the required anchorage length of FRP rebar in concrete will be derived. A database was created on the bond stress-slip behaviour of FRP rebars in concrete from the available literature up to 2009. The data was statistically analyzed to investigate the effect of the different parameters on the bond performance of FRP rebars. It was observed that an increase in the confinement provided by the transverse reinforcement increased the bond strength of FRP rebars in concrete. This signifies that the presence of transverse reinforcement affects the bond behaviour of FRP rebars in concrete and hence, it should be taken into consideration while developing design equations for FRP rebars. Type of fibre and rebar surface does not affect the bond stress, but the latter affects the slip corresponding to the peak bond stress. Based on the results, a nonlinear regression analysis was performed to develop the bond stress-slip model for splitting mode of failure and a design equation for determining the development length of the FRP rebars in concrete was derived. The proposed development length equation can save about 10%-15% of the d.
Corrosion-resistant, electromagnetic transparent and lightweight fiber-reinforced polymers (FRPs) are accepted as valid alternatives to steel in concrete reinforcement. Reinforced Concrete with FRP Bars: Mechanics and Design, a technical guide based on the authors more than 30 years of collective experience, provides principles, algorithms, and pr
Although the use of composites has increased in many industrial, commercial, medical, and defense applications, there is a lack of technical literature that examines composites in conjunction with concrete construction. Fulfilling the need for a comprehensive, explicit guide, Reinforced Concrete Design with FRP Composites presents specific informat
Dealing with a wide range of non-metallic materials, this book opens up possibilities of lighter, more durable structures. With contributions from leading international researchers and design engineers, it provides a complete overview of current knowledge on the subject.
"In 1993, the CEB Commission 2 Material and Behavior Modelling established the Task Group 2.5 Bond Models. It's terms of reference were ... to write a state-of-art report concerning bond of reinforcement in concrete and later recommend how the knowledge could be applied in practice (Model Code like text proposal)... {This work} covers the first part ... the state-of-art report."--Pref.
Conference proceedings of the Fourteenth American Society for Composites held on the September 27-29 1999 at the Holiday Inn-1675 Conference Centre, Fairborn, Ohio.
Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures.