Download Free Biotribology Of Natural And Artificial Joints Book in PDF and EPUB Free Download. You can read online Biotribology Of Natural And Artificial Joints and write the review.

Biotribology of Natural and Artificial Joints: Reducing Wear Through Material Selection and Geometric Design with Actual Lubrication Mode provides a thorough overview of key issues surrounding the tribological behaviors of both natural and artificial joints, covering methods for optimizing the properties of biomaterials, summarizing the lubrication and contact mechanics of natural and artificial joints, and offering solutions to tribological problems in soft biomaterials and surface failures of materials. Sections cover biomechanics and biotribology of natural and artificial joints, articular cartilage and synovial fluids, methods for improving the tribological properties of artificial joints, and the biotribology of artificial joints with artificial cartilage, regenerated cartilage, and biomimetic design solutions. - Provides insights on how to optimize the performance of artificial joints via friction reduction, better material selection and improved geometric design - Looks at the effects of rubbing and loading on tissue regeneration with chondrocytes - Discusses lubrication and contact mechanisms for reducing friction and wear in artificial and natural joints - Outlines artificial joint design considerations for achieving low wear
The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes.
Tribology is the “science and technology of interacting surfaces in relative motion” and encompasses the study of friction, wear and lubrication. By extension biotribology is usually defined as the tribological phenomena occurring in either the human body or in animals. Therefore, it is possible to consider tribological processes that may occur after implantation of an artificial device in the human body and the tribological processes naturally occurring in or on the tissues and organ of animals. Animals, including humans, possess a wide variety of sliding and frictional interfaces. The authors aim to provide some advances in research in biotribology. They cover several aspects of biotribology such as tribology of synovial joints and artificial replacements; wear of screws and plates in bone fractures repair; wear of denture and restorative materials; friction of the skin and comfort of clothing; wear of replacement heart valves; tribology of contact lenses and ocular tribology; biotribology on the microscale and nanoscale levels, etc. This book can be used as a research text for final undergraduate engineering courses (for example, materials, biomedical, etc.) or for those studying the subject of biotribology at the postgraduate level. It can also serve as a useful reference for academics, biomechanical researchers, biologists, chemists, physicists, biomedicals and materials engineers, and other professionals in related engineering, medicine and biomedical industries.
This book summarizes the theoretical and experimental studies confirming the concept of the liquid-crystalline nature of boundary lubrication in synovial joints. It is shown that cholesteric liquid crystals in the synovial liquid play a significant role in the mechanism of intra-articular friction reduction. The results of structural, rheological and tribological research of the creation of artificial synovial liquids containing cholesteric liquid crystals in natural synovial liquids are described. These liquid crystals reproduce the lubrication properties of natural synovia and provide a high chondroprotective efficiency. They were tested in osteoarthritis models and in clinical practice.
This book presents a comprehensive, state-of-the-art review of the latest progresses in UHMWPE biomaterials, which has been critical for the performance and longevity of joint implants. Oriented by clinical challenges to UHMWPE-based joint implants, it introduces the processing, crosslinking, structural manipulation, oxidation mechanism, stabilization, drug delivery, and wear, as well as clinical performance, biomechanics, and simulated studies of joint implant based on UHMWPE with low wear, which are aimed to tackle or minimize the adverse effect related to wear and wear debris. These contributions provide fundamentals of chemistry and physics of UHMWPEs to help understand the clinical performances of UHMWPE based joint implants. Perspectives to next generation UHMWPE to meet the unmet challenges in clinical use are included.
Tribology is a multidisciplinary science that encompasses mechanical engineering, materials science, surface engineering, lubricants, and additives chemistry with tremendous applications. Progress in Lubrication and Nano- and Biotribology discusses the latest in lubrication engineering and nano- and biotribology. This book: Discusses green tribology and snakeskin tribology Explains biogreases and nanolubricant additives Explores applications in aerospace, additively manufactured parts, and severe environments Written for researchers and advanced students, this book encompasses a wide-ranging view of the latest in nano- and biotribology for a variety of cross-disciplinary applications.
The third edition of Joint Replacement Technology provides a thoroughly updated review of recent developments in joint replacement technology. Joint replacement is a standard treatment for joint degradation and has improved the quality of life of millions of patients. Collaboration between clinicians and researchers is critical to its continued success and to meet the rising expectations of patients and surgeons.This edition covers a range of updated and new content, ranging from chapters on materials analysis and selection, to methodologies and techniques used for joint replacement and clinical challenges of replacing specific joints. Key topics include tribological considerations and experiments; challenges in joint bearing surfaces; cementless fixation techniques; healing responses to implants. Clinical challenges and perspectives are covered with the aid of case studies.Thanks to its widespread collaboration and international contributors, Joint Replacement Technology, Third Edition is useful for materials scientists and engineers in both academia and the biomedical industry. Chemists, clinicians, and other researchers in this area will also find this text invaluable. - This third edition provides an updated comprehensive review of recent developments in joint replacement technology - Reviews a range of specific joints, biological and mechanical issues and fixation techniques - Includes revised and new content, such as sections on regulatory affairs, AI techniques and 3D printing
TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.
"Biotribology includes tribological phenomena of natural and implant surface interactions under relative motion in the human body. This book disseminates ideas and research trends in biotribology and presents pioneering recent research advances impacting the field, focusing on the role of mathematics, chemistry, physics, materials, and mechanical engineering. Biotribology is an important and growing field, and topics covered in the book will be of great interest to the international tribology community, appealing to readers working in the fields of materials science, biomedical engineering, biotechnology, mechanical engineering, and related areas"--