Download Free Assessment Of Frp Composite Strengthened Reinforced Concrete Structures At The Component And Systems Level Through Progressive Damage And Non Destructive Evaluation Book in PDF and EPUB Free Download. You can read online Assessment Of Frp Composite Strengthened Reinforced Concrete Structures At The Component And Systems Level Through Progressive Damage And Non Destructive Evaluation and write the review.

Fiber-reinforced polymer (FRP) composite materials have been increasingly used in civil engineering applications in the past two decades. Their wide ranging use, however, is still not realized due to a few fundamental issues including high material costs, relatively short history of applications and the gaps in the development of established standards. Design safety requires that all possible modes and mechanisms of failure are identified, characterized, and accounted for in the design procedures. This chapter provides a review of the failure types encountered in structural engineering applications of FRP and the preventive methods and strategies that have been developed to eliminate or delay such failures. As part of preventive measures, various non-destructive testing (NDT) and structural health monitoring (SHM) methods used for monitoring FRP applications are discussed with illustrative examples.
High strength fibre composites (FRPs) have been used with civil structures since the 1980s, mostly in the repair, strengthening and retrofitting of concrete structures. This has attracted considerable research, and the industry has expanded exponentially in the last decade. Design guidelines have been developed by professional organizations in a number of countries including USA, Japan, Europe and China, but until now designers have had no publication which provides practical guidance or accessible coverage of the fundamentals. This book fills this void. It deals with the fundamentals of composites, and basic design principles, and provides step-by-step guidelines for design. Its main theme is the repair and retrofit of un-reinforced, reinforced and prestressed concrete structures using carbon, glass and other high strength fibre composites. In the case of beams, the focus is on their strengthening for flexure and shear or their stiffening. The main interest with columns is the improvement of their ductility; and both strengthening and ductility improvement of un-reinforced structures are covered. Methods for evaluating the strengthened structures are presented. Step by step procedures are set out, including flow charts, for the various structural components, and design examples and practice problems are used to illustrate. As infrastructure ages worldwide, and its demolition and replacement becomes less of an option, the need for repair and retrofit of existing facilities will increase. Besides its audience of design professionals, this book suits graduate and advanced undergraduate students.
The Most Complete FRP Reinforced Concrete Structure Analysis and Design Guide This comprehensive reference provides proven design procedures for the use of fiber-reinforced polymer (FRP) materials for reinforcement, prestressing, and strengthening of reinforced concrete structures. The characteristics of FRP composite materials as well as the latest manufacturing techniques are discussed. Detailed illustrations and tables, design equations, end-of-chapter problems, and real-world case studies are included in this authoritative resource. Analysis and Design of FRP Reinforced Concrete Structures covers: Material characteristics of FRP bars History and uses of FRP technology Design of RC structures reinforced with FRP bars Design philosophy for FRP external strengthening systems Durability-based design approach for external FRP strengthening of RC beams
Fiber-reinforced polymer (FRP) strengthening and retrofitting of concrete structural elements has become increasingly popular for civil infrastructure systems. When defects occur in FRP-reinforced concrete elements at the FRP-concrete interface, such as voids or delamination, FRP obscures the defect such that visual detection may not be possible. Most currently available non-destructive testing (NDT) methods rely on physical contact; an NDT method that is capable of remotely assessing damage would be greatly advantageous. A novel approach called the acoustic-laser vibrometry method which is capable of remote assessment of damage in FRP-reinforced concrete, is investigated in this thesis. It exploits the fact that areas where the FRP has debonded from concrete will vibrate excessively compared to intact material. In order to investigate this method, a laboratory system consisting of a commercial laser vibrometer system and conventional loudspeaker was used to perform tests with fabricated FRP-reinforced concrete specimens. The measurement results in the form of resonant frequencies were compared to those determined from theoretical and finite element defect models. With a series of measurements the vibrational mode shapes of defects and extent of the damage were imaged. The feasibility of the method was determined through a series of parametric studies, including sound pressure level (SPL), defect size, laser signal level, and angle of incidence. A preliminary Receiver Operating Characteristic (ROC) curve was determined for the method, and future work involving the acoustic-laser vibrometry method is proposed.
This volume highlights the latest advances, innovations, and applications in the field of FRP composites and structures, as presented by leading international researchers and engineers at the 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), held in Istanbul, Turkey on December 8-10, 2021. It covers a diverse range of topics such as All FRP structures; Bond and interfacial stresses; Concrete-filled FRP tubular members; Concrete structures reinforced or pre-stressed with FRP; Confinement; Design issues/guidelines; Durability and long-term performance; Fire, impact and blast loading; FRP as internal reinforcement; Hybrid structures of FRP and other materials; Materials and products; Seismic retrofit of structures; Strengthening of concrete, steel, masonry and timber structures; and Testing. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.