Download Free Army Techniques Publication Atp 6 0272 Tac Radios Multi Service Tactics Techniques And Procedures For Tactical Radios Atp 6 0272 Mcrp 3 403a Nttp 6 022 Afttp 3 218 November 2013 Book in PDF and EPUB Free Download. You can read online Army Techniques Publication Atp 6 0272 Tac Radios Multi Service Tactics Techniques And Procedures For Tactical Radios Atp 6 0272 Mcrp 3 403a Nttp 6 022 Afttp 3 218 November 2013 and write the review.

This publication, ATP 6-02.72, MCRP 3-40.3A, NTTP 6-02.2, AFTTP 3-2.18, provides a single-source, consolidated reference for tactics, techniques, and procedures in the employment, configuration, and creation of radio nets consisting of voice and data tactical radios. It describes multi-Service tactics, techniques, and procedures (MTTP) for the tactical employment of tactical radios to support warfighters for training and operations across the spectrum of operations. This publication applies to the Army, Navy, Air Force, Marine Corps, and Coast Guard. Also, it may be used by multi-Service and Service components of a joint force to conduct tactical radio training and operations. Procedures herein may be modified to fit specific theater command and control (C2) procedures and allied and foreign national electromagnetic spectrum management requirements. This publication discusses current voice and data tactical radio systems in common use between the services. It describes recent updates to the Single-Channel Ground and Airborne Radio System (SINCGARS), including the Advanced System Improvement Program (ASIP) and the Internet controller (INC). It also reviews the operational procedures for SINCGARS for both analog and digital operations in a joint environment. This manual also describes the Enhanced Position Location Reporting System (EPLRS). This publication standardizes joint operational procedures for SINCGARS and provides an overview of the multiservice applications of EPLRS.
This United States Army manual, Army Techniques Publication ATP 6-02.53 Techniques for Tactical Radio Operations February 2020, is the primary doctrine publication for tactical radios and tactical radio networks. This publication describes the non-prescriptive methods to perform missions, functions, and tasks for the employment of tactical radio networks to support every warfighting function and enable command and control of Army forces. This publication includes doctrine on new communications and networking capabilities. It addresses the employment of interdependent and interoperable enterprise and tactical systems in the tactical network. This publication supports the Army's goal to provide an integrated network that is interoperable across all mission environments during all phases of operations. This publication implements North Atlantic Treaty Organization standardization agreement 4538, Technical Standards for an Automatic Radio Control System for High Frequency Communication Links. The principal audience for ATP 6-02.53 is commanders, staffs, supervisors, planners, radio operators, signal Soldiers, and other personnel responsible for operating tactical radios or employing tactical radio networks across multiple domains, at all echelons. ATP 6-02.53 is a standard reference for tactical radios. It provides system planners with guidance and steps for network planning, interoperability considerations, and equipment capabilities. ATP 6-02.53 uses joint terms where applicable. Selected joint and Army terms and definitions appear in both glossary and the document. Terms for which ATP 6-02.53 is the proponent publication (the authority) are italicized in the text and marked with an asterisk (*) in the glossary. Terms and definitions for which ATP 6-02.53 is the proponent publication are boldfaced in the text. For other definitions shown in the text, the term is italicized and the number of the proponent publication follows the definition. ATP 6-02.53 applies to the Regular Army, Army National Guard/Army National Guard of the United States, and United States Army Reserve unless otherwise stated.
This publication discusses current voice and data tactical radio systems in common use between the services. It describes recent updates to the Single-Channel Ground and Airborne Radio System (SINCGARS), including the Advanced System Improvement Program (ASIP) and the Internet controller (INC). It also reviews the operational procedures for SINCGARS for both analog and digital operations in a joint environment. This manual also describes the Enhanced Position Location Reporting System (EPLRS). This publication standardizes joint operational procedures for SINCGARS and provides an overview of the multiservice applications of EPLRS.
Army Techniques Publication ATP 6-02.53 Techniques for Tactical Radio Operations January 2016 replaces Field Manual (FM) 6-02.53, Tactical Radio Operations and expands on the foundation of tactical radios operations found in FM 6-02, Signal Support to Operations. ATP 6-02.53 incorporates numerous changes. The Integrated Tactical Networking Environment is a combination and evolution of all three concepts through the integration of the software based networking radio technologies, and mission command mounted and mobile applications management. Communications and mobility are key enablers of mission command in support of the execution of successful unified land operations. Communications must support the Army's aim to seize, retain, and exploit the initiative to gain and maintain a position of relative advantage over the enemy in sustained land operations. Army forces must be able to move repeatedly and communicate. Tactical situations change rapidly during sustained land operations, requiring tactical radios that are versatile and readily adaptable to rapidly changing tactical situations. Communications in support of unified land operations require the employment of communications capabilities at squad level and higher echelons. Communications at the squad level enables communication and situational awareness at the lowest level possible. ATP 6-02.53 contains 12 chapters and 9 appendices- Ch 1 provides an overview of tactical radios, tactical radio networks, capabilities, and network management. Ch 2 addresses the employment of tactical radios at all echelons throughout the Army. Ch 3 addresses the tactical radio platforms and associated waveforms that Army forces employ at all echelons across all phases of operations. Ch 4 discusses the waveform and waveform application functional component of the tactical networking environment. Ch 5 describes the commercial-off-the-shelf very high frequency radios used to support tactical radio operations. Ch 6 addresses the ultrahigh frequency radios and systems that play a major role in network centric warfare. Ch 7 addresses the Army single channel tactical satellite capabilities associated with the legacy and enduring radio platform and planning considerations. Ch 8 addresses the airborne radios employed to provide communications for ground-to-air operations as well as air-to-air and air-to-sea missions. Ch 9 addresses various other tactical radio systems employed to enable communication and situational awareness during the conduct of operations. Ch 10 addresses antenna techniques, concepts, terms, types, effects, and provides examples of antenna field repairs. Ch 11 addresses key management techniques relative to protecting voice, data, and video information over tactical radio networks. Ch 12 addresses electronic warfare and the electronic protection techniques used to prevent enemy jamming and intrusion into friendly communications systems. App A provides a description of frequency modulation networks. App B identifies radio sets basic components, characteristics, properties of radio waves, wave modulation, and site considerations for single channel radios. App C addresses the importance of high frequency, very high frequency, ultrahigh frequency antenna selection. App D addresses radio operations in unusual environments. App E addresses the Julian date, synchronization time, and Zulu time. It also provides a time zone conversion chart. App F provides procedures for preventing a network compromise and addresses recovery options available to the commander and his staff. App G addresses data communications elements such as binary data, baud rate, modems, and forward error correction. App H addresses single channel ground airborne radio system implications and cosite interference mitigation. App I addresses the proper way to send messages over a radio as well as the proper procedures for opening and closing a radio net.
This United States Army Multi-Service manual, Army Techniques Publication ATP 3-52.2 TAGS Multi-Service Tactics, Techniques, and Procedures for The Theater Air-Ground System May 2020, provides a generic concept and procedures for TAGS operations. It is a framework for all planners to facilitate the integration of air and ground operations. The theater air-ground system (TAGS) is a conglomeration of systems. For the purpose of this publication, TAGS refers to organizations, personnel, equipment, and procedures that participate in planning and executing all air-ground operations. Understanding the chain of command and systems comprising TAGS allows it to be maximized, providing the ability to create quick and decisive combat results. The objective of this publication is to describe how each of the Service component's systems operate within the TAGS. TAGS combines each Service's command and control (C2) and airspace control system into a multi-domain framework, allowing each Service to operate as part of a unified effort in support of the joint force commander (JFC).This MTTP publication applies to all commanders and their staffs. This publication is approved for public release with Distribution Statement A, in accordance with Department of Defense Directive Instruction 5230.24, Distribution Statements on Technical Documents.TAGS incorporates the Army air-ground system (AAGS), Marine air command and control system (MACCS), Navy tactical air control system (NTACS), special operations air-ground system (SOAGS), and the theater air control system (TACS) into one system. Each Service component's air-ground system is designed to facilitate C2 of its operations and interface with the TAGS. The roles, responsibilities, and authorities of each TAGS element is spelled out in theater-wide documents, such as the area air defense plan (AADP), airspace control plan (ACP), and operational task link (OPTASKLINK). When delegated tasks and authorities exceed the component commander's scope of operations, the responsibilities and authorities are included in the special instructions (SPINS).This United States Government TTP publication is known as: Army Techniques Publication ATP 3-52.2 Marine Corps Reference Publication MCRP 3-20.1 Navy Tactical Techniques Publication NTTP 3-56.2 Air Force Tactics Techniques and Procedures AFTTP 3-2.17
Army Techniques Publication ATP 4-10 MCRP 4-11H NTTP 4-09.1 AFMAN 10-409-O Multi-Service Tactics, Techniques, and Procedures or Operational Contract Support February 2016 This multi-Service tactics, techniques, and procedures manual provides operational contract support (OCS) "how to" guidance for Army, Air Force, and Marine Corps commanders, their non-acquisition officer staffs, and their servicing contracting organizations. It also applies to Naval forces operating ashore when these forces are being supported by Army, Air Force, or Marine Corps units. It serves as the primary reference document for planning and execution of OCS, associated functions and tasks at the tactical level. It supersedes ATTP 4-10, Operational Contract Support, dated June 2011 and incorporates the latest guidance found in JP 4-10, Operational Contract Support, dated 16 July 2014 and other associated regulatory guidance. OCS is the process of planning for and obtaining supplies, services, and construction from commercial sources in support of joint operations. While varying in scope and scale, OCS is a critical force multiplier across all phases and types of operations. With a smaller military, less robust active component sustainment capability, and greater emphasis on Phase 0 operations, the critical importance of operational contract support will surely increase as a necessary capability in future operations. Therefore, the Services must continue to enhance their capabilities to plan and provide OCS for deployed forces. This multi-Service publication is intended to provide commanders and their staffs with the doctrinal and policy tools necessary to properly leverage the full spectrum of OCS capabilities in all phases of the operation. This multi-Service publication content remains generally consistent with that found in ATTP 4-10; however, terminology and concepts have been updated as required. Most notably, OCS is redefined and contracting support added as one of the three key OCS functions, in accordance with joint OCS doctrine. The material in this multi-Service publication is presented in a more logical format and sequence, and several new appendices provide an overview of multi-Service OCS capabilities and contain checklists to assist requiring activities and supported units with OCS planning and execution. This multi-Service publication contains five chapters: Chapter 1 introduces OCS and other OCS-related terms, introduces the OCS process and team, discusses key OCS imperatives to minimize risk of contract fraud and unauthorized commitments, and closes with a brief discussion on ethics. Chapter 2 discusses joint planning guidance and the integration of OCS requirements into tactical level planning. It also covers considerations for conducting relief in place and base drawdown and closure. Chapter 3 describes the requirements development process with a focus on requiring activity and supported unit functions. It also discusses the critical parts of a contract support request package and the contract support request package approval process. Chapter 4 covers requiring activity and supported unit responsibilities in contract performance oversight, how contract support is typically assessed, and contains sections on unauthorized commitments, ratifications, and contract closeout actions. Chapter 5 discusses contractor management planning, linking contractor management requirements to the requirements development and contract performance oversight processes, contractor management risks and challenges, contractor personnel legal status information, deployment and redeployment planning and preparation requirements, contractor management in theater, and closes with a section on ensuring fair labor processes.
This United States Army manual, Army Techniques Publication ATP 1-02.1 Brevity Multi-Service Tactics, Techniques, and Procedures for Multi-Service Brevity Codes May 2020, is a product of the Air Land Sea Application (ALSA) Center in accordance with (IAW) the memorandum of agreement between the Headquarters of the United States (US) Army, Marine Corps, Navy, and Air Force doctrine commanders directing ALSA to develop MTTP publications to meet the immediate needs of the warfighter. This publication will improve coordination and understanding during multi-Service operations. A brevity code is a code which provides no security but which has as its sole purpose the shortening of messages rather than the concealment of its content. This United States Government TTP publication is known as: Army Techniques Publication ATP 1-02.1 Marine Corps Reference Publication 3-30B.1 Navy Tactical Techniques Publication 6-02.1 Air Force Tactics Techniques and Procedures 3-2.5
Multi-service Tactics, techniques, and procedures for Operation Assessment ATP 5-0.3 MCRP 5-10.1 (Formerly MCRP 5-1C) NTTP 5-01.3 AFTTP 3-2.87 August 2015 This multi-Service tactics, techniques, and procedures (MTTP) publication serves as a commander and staff guide for integrating assessments into the planning and operations processes for operations conducted at any point along the range of military operations. It provides operation assessment "how to" techniques and procedures which complement current joint and Service doctrine, and provides guidance on disparate assessment related terms. The MTTP is a means for ensuring appropriate assessment information gets to the right decision maker at the right time to make a decision.
Army Techniques Publication ATP 3-91.1 AFTTP 3-2.86 The Joint Air Ground Integration Center April 2019This manual, Army Techniques Publication (ATP) 3-91.1/Air Force Tactics, Techniques, and Procedures (AFTTP) 3-2.86, The Joint Air Ground Integration Center, provides division commanders, staff officers, air support operations center, division tactical control party, and airspace element personnel with tactics and techniques to enhance the synchronization of joint fires and air operations in airspace delegated to the ground commander's control. Using the theater air-ground system and the operations process, this publication addresses roles and responsibilities, by echelon, of Army and Air Force elements in the execution of joint fires and airspace control. The principal audience for ATP 3-91.1/AFTTP 3-2.86 is commanders, leaders, staffs, airspace elements, air traffic controllers, air support operations centers (ASOC), and airspace users throughout the Army air-ground system (AAGS) and Air Force theater air control system (TACS) with responsibilities for joint fires and airspace control from tactical to operational levels. Trainers and educators throughout the Army and Air Force will also use this publication. ATP 3-91.1/AFTTP 3-2.86 recognizes and implements the standardization agreement entitled Allied Joint Publication (AJP)-3.3.5, Allied Joint Doctrine for Airspace Control, Edition B, Version 1, May 2013. ATP 3-91.1/AFTTP 3-2.86 uses joint terms where applicable. Selected joint, Army, and Air Force terms and definitions appear in both the glossary and the text. For definitions shown in the text, the term is italicized and the number of the proponent publication follows the definition. ATP 3-91.1/AFTTP 3-2.86 is a multi-Service Army and Air Force publication. Unless otherwise stated, this publication applies to the Active Army, the Active Air Force, the Army National Guard/Air National Guard of the United States, and the Reserve forces of both Services.
This United States Army and Joint manual, BREVITY MULTI-SERVICE TACTICS, TECHNIQUES, AND PROCEDURES FOR MULTI-SERVICE BREVITY CODES ATP 1-02.1 MCRP 3-30B.1 NTTP 6-02.1 AFTTP 3-2.5 APRIL 2021, standardizes air-to-air (A/A), air-to-surface (A/S), surface-to-air (S/A), surface-to-surface (S/S), maritime air, and maritime to maritime brevity codes regardless of communication medium (voice/chat), as well as brevity codes (abbreviations) specific for use in tactical chat. The scope of this publication is limited to those brevity codes used in multi-Service operations and does not include words unique to single-Service operations. All Services agree to these brevity code meanings. These brevity codes have been forwarded to the NATO Standardization Office (NSO) terminology custodian for inclusion or modification of current joint brevity words in APP-7 and other appropriate Allied Communications Publications.