Download Free Applications Of Model Predictive Control To Vehicle Dynamics For Active Safety And Stability Book in PDF and EPUB Free Download. You can read online Applications Of Model Predictive Control To Vehicle Dynamics For Active Safety And Stability and write the review.

Each year in the United States, thousands of lives are lost as a result of loss of control crashes. Production driver assistance systems such as electronic stability control (ESC) have been shown to be highly effective in preventing many of these automotive crashes, yet these systems rely on a sensor suite that yields limited information about the road conditions and vehicle motion. Furthermore, ESC systems rely on gains and thresholds that are tuned to yield good performance without feeling overly restrictive to the driver. This dissertation presents an alternative approach to providing stabilization assistance to the driver which leverages additional information about the vehicle and road that may be obtained with advanced estimation techniques. This new approach is based on well-known and robust vehicle models and utilizes phase plane analysis techniques to describe the limits of stable vehicle handling, alleviating the need for hand tuning of gains and thresholds. The resulting state space within the computed handling boundaries is referred to as a safe handling envelope. In addition to the boundaries being straightforward to calculate, this approach has the benefit of offering a way for the designer of the system to directly adjust the controller to accomodate the preferences of different drivers. A model predictive control structure capable of keeping the vehicle within the safe handling boundaries is the final component of the envelope control system. This dissertation presents the design of a controller that is capable of smoothly and progressively augmenting the driver steering input to enforce the boundaries of the envelope. The model predictive control formulation provides a method for making trade-offs between enforcing the boundaries of the envelope, minimizing disruptive interventions, and tracking the driver's intended trajectory. Experiments with a steer-by-wire test vehicle demonstrate that the model predictive envelope control system is capable of operating in conjunction with a human driver to prevent loss of control of the vehicle while yielding a predictable vehicle trajectory. These experiments considered both the ideal case of state information from a GPS/INS system and an a priori friction estimate as well as a real-world implementation estimating the vehicle states and friction coefficient from steering effort and inertial sensors. Results from the experiments demonstrated a controller that is tolerant of vehicle and tire parameterization errors and works well over a wide range of conditions. When real time sensing of the states and friction properties is enabled, the results show that coupling of the controller and estimator is possible and the model predictive control structure provides a mechanism for minimizing undesirable coupled dynamics through tuning of intuitive controller parameters. The model predictive control structure presented in this dissertation may also be considered as a general framework for vehicle control in conjunction with a human driver. The structure utilized for envelope control may also be used to restrict other vehicle states for safety and stability. Results are presented in this dissertation to show that a model predictive controller can coordinate a secondary actuator to alter the planar states and reduce the energy transferred into the roll modes of the vehicle. The systematic approach to vehicle stabilization presented in this dissertation has the potential to improve the design methodology for future systems and form the basis for the inclusion of more advanced functions as sensing and computing capabilities improve. The envelope control system presented here offers the opportunity to advance the state of the art in stabilization assistance and provides a way to help drivers of all skill levels maintain control of their vehicle.
Nonlinear Approaches in Engineering Applications: Design Engineering Problems examines the latest applications of nonlinear approaches in engineering and addresses a range of scientific problems. Chapters are authored by world-class scientists and researchers and focus on the application of nonlinear approaches in different disciplines of engineering and scientific applications, with a strong emphasis on application, physical meaning, and methodologies of the approaches. Topics covered are of high interest in engineering and physics, and an attempt has been made to expose engineers and researchers to a broad range of practical topics and approaches. This book is appropriate for researchers, students, and practicing engineers who are interested in the applications of engineering, physics, and mathematics in nonlinear approaches to solving engineering and science problems.
Vehicle Dynamics and Control provides a comprehensive coverage of vehicle control systems and the dynamic models used in the development of these control systems. The control system applications covered in the book include cruise control, adaptive cruise control, ABS, automated lane keeping, automated highway systems, yaw stability control, engine control, passive, active and semi-active suspensions, tire-road friction coefficient estimation, rollover prevention, and hybrid electric vehicles. In developing the dynamic model for each application, an effort is made to both keep the model simple enough for control system design but at the same time rich enough to capture the essential features of the dynamics. A special effort has been made to explain the several different tire models commonly used in literature and to interpret them physically. In the second edition of the book, chapters on roll dynamics, rollover prevention and hybrid electric vehicles have been added, and the chapter on electronic stability control has been enhanced. The use of feedback control systems on automobiles is growing rapidly. This book is intended to serve as a useful resource to researchers who work on the development of such control systems, both in the automotive industry and at universities. The book can also serve as a textbook for a graduate level course on Vehicle Dynamics and Control.
To resolve the urban transportation challenges like congestion, parking, fuel consumption, and pollution, narrow urban vehicles which are small in footprint and light in their gross weight are proposed. Apart from the narrow cabin design, these vehicles are featured by their active tilting system, which automatically tilts the cabin like a motorcycle during the cornering for comfort and safety improvements. Such vehicles have been manufactured and utilized in city commuter programs. However, there is no book that systematically discusses the mechanism, dynamics, and control of narrow tilting vehicles (NTVs). In this book, motivations for building NTVs and various tilting mechanisms designs are reviewed, followed by the study of their dynamics. Finally, control algorithms designed to fully utilize the potential of tilting mechanisms in narrow vehicles are discussed. Special attention is paid to an efficient use of the control energy for rollover mitigation, which greatly enhance the stability of NTVs with optimized operational costs.
Collision avoidance systems like emergency braking assist systems have demonstrated their effectiveness in increasing the safety of vehicle passengers in various studies. To further increase the effectiveness of collision avoidance systems, the exploitation of the lateral free space by evasive maneuvers is being investigated in this book. This work focuses on methods for integrated trajectory planning and vehicle dynamics control in collision avoidance scenarios by combined evasion and braking.
This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16–17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas – advanced materials and sustainable energy – and a diverse range of subtopics: Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials. Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.
The authors examine in detail the fundamentals and mathematical descriptions of the dynamics of automobiles. In this context different levels of complexity will be presented, starting with basic single-track models up to complex three-dimensional multi-body models. A particular focus is on the process of establishing mathematical models on the basis of real cars and the validation of simulation results. The methods presented are explained in detail by means of selected application scenarios.
This book presents essential knowledge of car vehicle dynamics and control theory with NI LabVIEW software product application, resulting in a practical yet highly technical guide for designing advanced vehicle dynamics and vehicle system controllers. Presenting a clear overview of fundamental vehicle dynamics and vehicle system mathematical models, the book covers linear and non-linear design of model based controls such as wheel slip control, vehicle speed control, path following control, vehicle stability and rollover control, stabilization of vehicle-trailer system. Specific applications to autonomous vehicles are described among the methods. It details the practical applications of Kalman-Bucy filtering and the observer design for sensor signal estimation, alongside lateral vehicle dynamics and vehicle rollover dynamics. The book also discusses high level controllers, alongside a clear explanation of basic control principles for regenerative braking in both electric and hybrid vehicles, and wheel torque vectoring systems. Concrete LabVIEW simulation examples of how the models and controls are used in representative applications, along with software algorithms and LabVIEW block diagrams are illustrated. It will be of interest to engineering students, automotive engineering students and automotive engineers and researchers.
Recent developments in model-predictive control promise remarkable opportunities for designing multi-input, multi-output control systems and improving the control of single-input, single-output systems. This volume provides a definitive survey of the latest model-predictive control methods available to engineers and scientists today. The initial set of chapters present various methods for managing uncertainty in systems, including stochastic model-predictive control. With the advent of affordable and fast computation, control engineers now need to think about using “computationally intensive controls,” so the second part of this book addresses the solution of optimization problems in “real” time for model-predictive control. The theory and applications of control theory often influence each other, so the last section of Handbook of Model Predictive Control rounds out the book with representative applications to automobiles, healthcare, robotics, and finance. The chapters in this volume will be useful to working engineers, scientists, and mathematicians, as well as students and faculty interested in the progression of control theory. Future developments in MPC will no doubt build from concepts demonstrated in this book and anyone with an interest in MPC will find fruitful information and suggestions for additional reading.
Connectivity has arrived in the vehicle - whether it is in-car internet or car-to-car communication. For the chassis too, the connected car is increasingly becoming a driver of innovation. Predictive and intelligent chassis systems and automated driving are just some of the topics being addressed. In addition to enhancing driving comfort and safety, interconnecting the powertrain with the chassis can also provide new functions, not only in cars but also in commercial vehicles. What is more, modularization, electrification of the powertrain, intelligent development methods and efforts to reduce fuel consumption are also driving innovations in chassis systems.