Download Free An Experimental Study And Parameters Optimization On Duplex Turning Of Titanium Alloy Book in PDF and EPUB Free Download. You can read online An Experimental Study And Parameters Optimization On Duplex Turning Of Titanium Alloy and write the review.

The present article focuses on analyzing the cutting behavior of the duplex turning process for turn-cut machining of aerospace material, especially for titanium alloy. The experiments are conducted on a homemade setup that was mounted on a lathe machine. Each experiment was replicated twice to avoid variability, and a total of 31 experimental data are collected according to the Central Composite Rotating Design matrix. The feed rate, cutting velocity, and depth of cuts (primary and secondary) are taken as control parameters, while the average surface roughness, primary cutting force, and secondary cutting force are taken as response parameters. The experimental data are used to develop an empirical model using Response Surface Methodology (RSM). The developed RSM model has been experimentally tested and used to generate the response surfaces for parametric studies. Finally, the responses are optimized using D-optimality criteria, and the optimal results are experimentally validated. The result shows that RSM models are well fitted with experimental values with percentage errors of 5.03, 4.77, and 4.87 % for the Fp, Fs, and Ra, respectively. Furthermore, the optimal cutting condition shows significant improvement in the responses, i.e., 4.22, 3.72, and 2.85 % for the Fp, Fs, and Ra, respectively.
This book covers the most important aspects of lightweight metal alloys including history, physical metallurgy, overview of production technologies, alloy development, compositing, post-processing (heat treatment, surface engineering, bulk-deformation), and joining methodologies. It discusses the microstructural evolution, fractography, morphology of corroded and worn surface to enable easy understanding of the mechanism. The topics covered in this book include lightweight metallic materials, instrumental characterization of light weight metal alloys and composites, severe plastic deformation processing of aluminum alloys, solid-state welding of aluminum alloys, aluminum metal matrix composite for automotive and aircraft applications, and heat treatment of aluminum metal matrix composites. The book is highly useful for students, researchers, academicians, scientists, and engineers working on lightweight materials.
This book gathers a selection of peer-reviewed papers presented at the 2nd International Conference on Experimental and Computational Mechanics in Engineering (ICECME 2020), held as a virtual conference and organized by Universitas Syiah Kuala, Banda Aceh, Indonesia, on 13–14 October 2020. The contributions, prepared by international scientists and engineers, cover the latest advances in computational mechanics, metallurgy and material science, energy systems, manufacturing processing systems, industrial and system engineering, biomechanics, artificial intelligence, micro/nano-engineering, micro-electro-mechanical system, machine learning, mechatronics, and engineering design. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of experimental and computational mechanics.
This proceedings gather a selection of peer-reviewed papers presented at the 8th International Conference on Fracture Fatigue and Wear (FFW 2020), held as a virtual conference on 26–27 August 2020. The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications of fracture mechanics, fatigue of materials, tribology, and wear of materials. In addition, they discuss industrial applications and cover theoretical and analytical methods, numerical simulations and experimental techniques. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of fracture fatigue and wear.
This volume comprises select papers presented at the International Conference on Advances in Manufacturing Technology (ICAMT 2018). It includes contributions from different researchers and practitioners working in the field of advanced manufacturing technology. This book covers diverse topics of contemporary manufacturing technology including material processes, machine tools, cutting tools, robotics and automation, manufacturing systems, optimization technologies, 3D scanning and re-engineering, and 3D printing. Computer applications in design, analysis, and simulation tools for solving manufacturing problems at various levels starting from material designs to complex manufacturing systems are also discussed. This book will be useful for students, researchers, and practitioners working in the field of manufacturing technology.
Selected peer-reviewed extended articles based on abstracts presented at the 10th International Conference on Mechanics, Materials and Manufacturing (ICMMM 2023) Aggregated Book
This book provides a detailed understanding of optimization methods as they are implemented in a variety of manufacturing, fabrication and machining processes. It covers the implementation of statistical methods, multi-criteria decision making methods and evolutionary techniques for single and multi-objective optimization to improve quality, productivity, and sustainability in manufacturing. It reports on the theoretical aspects, special features, recent research and latest development in the field. Optimization of Manufacturing Processes is a valuable source of information for researchers and practitioners, as it fills the gap where no dedicated book is available on intelligent manufacturing/modeling and optimization in manufacturing. Readers will develop an understanding of the implementation of statistical and evolutionary techniques for modeling and optimization in manufacturing.
In the manufacturing sector, nanomaterials offer promising outcomes for cost reduction in production, quality improvement, and minimization of environmental hazards. This book focuses on the application of nanomaterials across a wide range of manufacturing areas, including in paint and coatings, petroleum refining, textile and leather industries, electronics, energy storage devices, electrochemical sensors, as well as in industrial waste treatment. This book: Examines nanofluids and nanocoatings in manufacturing and their characterization. Discusses nanomaterial applications in fabricating lightweight structural components, oil refining, smart leather processing and textile industries, and the construction industry. Highlights the role of 3D printing in realizing the full potential of nanotechnology. Considers synthetic strategies with a focus on greener protocols for the fabrication of nanostructured materials with enhanced properties and better control, including these materials' characterization and significant properties for ensuring smart outputs. Offers a unique perspective on applications in industrial waste recycling and treatment, along with challenges in terms of safety, economics, and sustainability in industrial processes. This work is written for researchers and industry professionals across a variety of engineering disciplines, including materials, manufacturing, process, and industrial engineering.
This book comprises selected peer-reviewed proceedings of the International Conference on Advances in Industrial Automation and Smart Manufacturing (ICAIASM) 2019. The contents focus on innovative manufacturing processes, standards and technologies used to implement Industry 4.0, and industrial IoT based environment for smart manufacturing. The book particularly emphasizes on emerging industrial concepts like industrial IoT and cyber physical systems, advanced simulation and digital twin, wireless instrumentation, rapid prototyping and tooling, augmented reality, analytics and manufacturing operations management. Given the range of topics covered, this book will be useful for students, researchers as well as industry professionals.
This book presents selected peer-reviewed papers presented at the International Conference on Innovative Technologies in Mechanical Engineering (ITME) 2019. The book discusses a wide range of topics in mechanical engineering such as mechanical systems, materials engineering, micro-machining, renewable energy, systems engineering, thermal engineering, additive manufacturing, automotive technologies, rapid prototyping, computer aided design and manufacturing. This book, in addition to assisting students and researchers working in various areas of mechanical engineering, can also be useful to researchers and professionals working in various allied and interdisciplinary fields.