Download Free An Approach To The Determination Of Aircraft Handling Qualities By Using Pilot Transfer Functions Book in PDF and EPUB Free Download. You can read online An Approach To The Determination Of Aircraft Handling Qualities By Using Pilot Transfer Functions and write the review.

An investigation to determine the ranges of various lateral directional characteristics required to provide adequate flying qualities for turning maneuvers at low speed was undertaken using an airborne V/STOL aircraft simulator. Five parameters were varied in a systematic manner: the damping ratio, the frequency, and the ratio and the frequency of the numerator of the roll-angle to aileron-control-input transfer function. The pilots performed a low speed, visual maneuvering task and documented their assessment of the characteristics through extensive comments and a numerical rating. The report presents all the data categorized with respect to the test parameters. (Author).
In-fl ight simulation experiments performed in 1967 with a variable-stabil ity aircraft during the author's stay at Princeton University, motivated the study of handl ing characteristics of future transport aircraft with closed-loop fl ight control systems. In 1972, the first experiment took place at the National Aerospace Laboratory NLR, using one of its research aircraft. In anticipation of expected developments in (digital) fl ight control technology, the research programme following the first experiments was aimed at the establ ishment of quantitative handl ing qual ities criteria. An appreciable part of that programme has been sponsored by the Netherlands Agency for Aerospace Programs (Nederlands Instituut voor VI iegtuigontwikkel ing en Ruimtevaart) and the Department of Civil Aviation of the Netherlands (Rijksluchtvaartdienst). In 1981, a thorough review of the extensive and valuable data gathered was started. The result, presented in this book, was also included in the author's thesis for a Ph.D. degree of the Delft University of Technology. To introduce the reader to the multi-discipl inary field of handl ing qual ities research, introductory chapters are presented on longitudinal aircraft dynamics, closed-loop fl ight control systems using non-mechanical signal transmission, human pilot dynamics, hand I ing qual ities assessment techniques, and the present status of handl ing qual ity criteria.
This report is a codification in two parts of conventional aircraft handling qualities criteria. The results of this effort are to serve as an intermediate design guide in the areas of lateral-directional oscillatory and roll control. The roll handling qualities portion of this report uses as a point of departure the concept that control of bank angle is the primary piloting task in maintaining or changing heading. In the lateral oscillatory portion of this effort, in defining requirements for satisfactory Dutch roll characteristics, a fundamental consideration is the fact that the motions characterizing this mode are ordinarily not the pilot's chief objective. That is, he is not deliberately inducing Dutch roll motions in the sense that he induces rolling and longitudinal short-period motions. A worthwhile approach to establishment of Dutch roll damping requirements is to first establish the basic level, and then to study the varied influences of the disturbance parameters. This approach provides the basis for the material contained in this report.
This report presents the results of analytical studies of a variety of handling quality topics related to advanced manned aircraft.