Download Free An Approach To Characterizing Materials Related Distress In Portland Cement Concrete Pavements Book in PDF and EPUB Free Download. You can read online An Approach To Characterizing Materials Related Distress In Portland Cement Concrete Pavements and write the review.

The objective of this research was to develop guidelines to provide pavement engineers and field and laboratory personnel with a systematic procedure for the identification, evaluation, treatment, and prevention of materials-related distress in portland cement concrete pavements.
The purpose of this research was to summarize existing nondestructive test methods that have the potential to be used to detect materials-related distress (MRD) in concrete pavements. The various nondestructive test methods were then subjected to selection criteria that helped to reduce the size of the list so that specific techniques could be investigated in more detail. The main test methods that were determined to be applicable to this study included two stress-wave propagation techniques (impact-echo and spectral analysis of surface waves techniques), infrared thermography, ground penetrating radar (GPR), and visual inspection. The GPR technique was selected for a preliminary round of "proof of concept" trials. GPR surveys were carried out over a variety of portland cement concrete pavements for this study using two different systems. One of the systems was a state-of-the-art GPR system that allowed data to be collected at highway speeds. The other system was a less sophisticated system that was commercially available. Surveys conducted with both sets of equipment have produced test results capable of identifying subsurface distress in two of the three sites that exhibited internal cracking due to MRD. Both systems failed to detect distress in a single pavement that exhibited extensive cracking. Both systems correctly indicated that the control pavement exhibited negligible evidence of distress. The initial positive results presented here indicate that a more thorough study (incorporating refinements to the system, data collection, and analysis) is needed. Improvements in the results will be dependent upon defining the optimum number and arrangement of GPR antennas to detect the most common problems in Iowa pavements. In addition, refining high frequency antenna response characteristics will be a crucial step toward providing an optimum GPR system for detecting materials related distress.
Pavement Engineering: Principles and Practice examines a wide range of topics in asphalt and concrete pavements from soil preparation and structural design to life cycle costing and economic analysis. This updated Fourth Edition covers all concepts and practices of pavement engineering in terms of materials, design, and construction methods for both flexible and rigid pavements and includes the latest developments in recycling, sustainable pavement materials, and resilient infrastructure. New and updated topics include material characterization concepts and tests, pavement management concepts, probabilistic examples of life cycle cost analysis, end-of-life considerations, waste plastic in asphalt, pervious concrete, pavement monitoring instrumentation and data acquisition, and more. The latest updated references, state of the art reviews, and online resources have also been included.
Hot mix asphalt (HMA) is used as the primary overlying material of concrete pavements during rehabilitation because of its inexpensive nature when compared to most Portland cement concrete (PCC) rehabilitation/reconstruction alternatives. However, due to the majority of the PCC pavements being in average to poor condition, many HMA overlays are exposed to extreme movements (both vertical and horizontal). The combination of associated load and environmentally induced movements creates complex stresses and strains in the vicinity of expansion joints and cracks in the PCC, thus dramatically reducing the life of the HMA overlay, typically in the form of reflective cracking. Reflective cracking is a fatigue cracking distress, which is initiated at the bottom of the HMA overlay and propagates to the surface. When the crack reaches the HMA overlay surface, not only does it affect the ride quality and overall integrity of the pavement surface, but it also creates a path for which water can migrate down into and below the PCC layer. This can ultimately reduce the overall structural support of the composite (HMA and PCC) pavement and result in a complete pavement failure. Medium to high severity reflective cracking results in poor surface conditions that could lead to poor driving conditions and higher accident rates. Therefore, this research is timely in that it not only addresses the structural integrity of the pavement system, but also the safety of the driving public, which is one of the main objectives of the administration at state agencies. To better understand the mechanisms associated with the development of reflective cracking, an extensive literature review was conducted. Analysis of the literature review indicated significant gaps in the current state of the practice in using bituminous overlays on PCC pavements. To fill in these gaps, a survey was developed, distributed to the state transportation agencies of all fifty states, and compiled to better define the scope of the research. The survey clearly identified that a major gap in the current state of the practice is linking the field conditions (climate, deflections, traffic levels) to appropriate laboratory testing protocols. Therefore, field test sections were selected with appropriate field forensic testing and traffic collection. During construction of the bituminous overlays, loose mix was collected and brought back to the laboratory for material characterization testing that would simulate the loading conditions associated with the respective test section. The research conducted during the development of this thesis has led to a rational approach in the prediction of reflective cracking potential in HMA overlays placed on PCC pavements. This methodology utilizes field forensic information that would normally be collected during the evaluation of the PCC/composite pavement prior to rehabilitation and laboratory fatigue and stiffness characterization of the HMA mixture(s), to predict the potential for reflective cracking in the bituminous overlay mixture(s). The extensive laboratory testing and field calibration/verification information utilized in the research has also led to "decision tree" methodology that would allow state agencies to properly select asphalt mixtures for overlaying PCC pavements.
A comprehensive, state-of-the-art guide to pavement design and materials With innovations ranging from the advent of SuperpaveTM, the data generated by the Long Term Pavement Performance (LTPP) project, to the recent release of the Mechanistic-Empirical pavement design guide developed under NCHRP Study 1-37A, the field of pavement engineering is experiencing significant development. Pavement Design and Materials is a practical reference for both students and practicing engineers that explores all the aspects of pavement engineering, including materials, analysis, design, evaluation, and economic analysis. Historically, numerous techniques have been applied by a multitude of jurisdictions dealing with roadway pavements. This book focuses on the best-established, currently applicable techniques available. Pavement Design and Materials offers complete coverage of: The characterization of traffic input The characterization of pavement bases/subgrades and aggregates Asphalt binder and asphalt concrete characterization Portland cement and concrete characterization Analysis of flexible and rigid pavements Pavement evaluation Environmental effects on pavements The design of flexible and rigid pavements Pavement rehabilitation Economic analysis of alternative pavement designs The coverage is accompanied by suggestions for software for implementing various analytical techniques described in these chapters. These tools are easily accessible through the book’s companion Web site, which is constantly updated to ensure that the reader finds the most up-to-date software available.