Download Free An Advanced Sodium Graphite Reactor Nuclear Power Plant Book in PDF and EPUB Free Download. You can read online An Advanced Sodium Graphite Reactor Nuclear Power Plant and write the review.

An advanced sodium-cooled, graphite-moderated nuclear power plant is described which utilizes high-pressure, high-temperature steam to generate electricity at a high thermal efficiency. Steam is generated at 2400 psig, superheated to 1050 deg F and, after partial expansion in the turbine, reheated to 1000 deg F. Net thermal efficiency of the plant is 42.3%. In a plant sized to produce a net electrical output of 256 Mw, the estimated cost is 8232/kw. Estimated cost of power generation is 6.7 mills/kwh. In a similar plant with a net electrical output of 530 Mw, the estimated power generating cost is 5.4 mills/ kwh. Most of the components of the plant are within the capability of current technology. The major exception is the fuel material, uranium carbide. Preliminary results of the development work now in progress indicate that uranium carbide would be an excellent fuel for high-temperature reactors, but temperature and burnup limitation have yet to be firmly established. Additional development work is also required on the steam generators. These are the single-barrier type similar to those which will be used in the Enrico Fernri Fast Breeder Reactor plant but produce steam at higher pressure and temperature. Questions also remain regarding the use of nitrogen as a cover gas over sodium at 1200 deg F and compatibility of the materials used in the primary neutron shield. All of these questions are currently under investigation. (auth).
A description is given of the Advanced Sodium Graphite Reactor Power Plant, including the reactor, heat transfer systems, generatirg plant, control systems, and the economics of producing 256 Mw(e). The safety of this design is due to its unusually low operating pressure, absence of chemically incompatible materials in the core, and excellent stability under atatic and dynamic conditions. The reactor is being constructed at Hallam, Nebraska, at a probable cost of 0 to 0/kw, exclusive of the first core costs. The 151 fuel elements of uranium carbide are enriched to 2.75 at.% U235 and clad in stainless steel. The average thermal neutron flux in the fuel is 8 x 1013 n/cm2sec. (B.O.G.).
An analysis of the transient behavior of a 255-Mw(e) advanced sodium graphite reactor, previously described in NAA-SR-3829, is presented. The reactor and its components are briefly described. Nuclear and thermal characteristics are presented as far as they affect reactor kinetics or are essential in interpreting the results. The study includes an investigation of the inherent kinetic characteristics of the reactor, as well as and analysis of its transient behavior for all conceivable conditions of abnormal operations. Assumed reactor excursions are analyzed with and without ensuing protective system action. It is shown that the reactor is dynamically stable and that power transients which are followed by normal protective system actions will not lead to potentially unsafe conditions. The conclusion is reached furthermore, that uncontrolled rod withdrawal accidents from source power will be terminated by coolant choking'' and fuel meltdown before extensive coolant boiling occurs, and that the large thermal capacity and long-time constant of the upper plenum will provide protection against pool boiling for other less serious accidents until the reactor can be shut down by external means. (auth).
Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates Written by an expert in that particular area