Download Free Aerodynamic Characteristics At Mach Numbers From 160 To 216 Of A Blunt Nose Missile Model Having A Triangular Cross Section And Fixed Triform Fins Book in PDF and EPUB Free Download. You can read online Aerodynamic Characteristics At Mach Numbers From 160 To 216 Of A Blunt Nose Missile Model Having A Triangular Cross Section And Fixed Triform Fins and write the review.

Tests were conducted at Mach number 4.05 to determine the aerodynamic characteristics of several missile models having turbulent boundary layers and to compare these results with available method of predicting the aerodynamic characteristics. (The condition of the boundary layer was determined by the china-clay-lacquer boundary-layer-visualization technique.) Normal force and pitching moment were measured through an angle-of-attack range of 0 to between 4 and 8 degrees, depending upon balance limitations, and at roll angles of 0 and 45 degrees; drag was measured only at 0 degrees angle of attack.
An investigation has been conducted in the Langley Unitary Plan wind tunnel at Mach numbers from 1.50 to 4.63 to determine the aerodynamic characteristics of a maneuverable missile having in-line cruciform wings and canard surfaces oriented in 45° roll planes.
An experimental investigation was conducted to determine the longitudinal aerodynamic characteristics at transonic speeds of missile configurations having three blunted cone-cylinder bodies. Modifications of the basic model were tested to indicate the effects of (a) relative lengths of coplanar bodies, (b) seals between the cylindrical portions of the bodies, (c) horizontal connecting surfaces near the rear of the bodies, and (d) triangular rather than coplanar body grouping. Lift, drag, and pitching-moment data were obtained at angles of attack from -4 to 12 degrees and Mach numbers from 0.6 to 1.4 for a constant Reynolds number of 5,500,000, based on average body length.