Download Free Advances In Laser Physics And Technology Book in PDF and EPUB Free Download. You can read online Advances In Laser Physics And Technology and write the review.

The birth of quantum electronics in the middle of the 20th century and the subsquent discovery of the laser led to new trends in physics and a number of photonic technolgies. This volume is dedicated to Peter Franken, a pioneer of nonlinear optics, and includes papers by the founders of quantum electronics, Aleksandr Prokhorov, Nicolaas Blombergen, and Norman Ramsey. The topics covered range from astronomy to nuclear and semiconductor physics, and from fundamental problems in quantum mechanics to applications in novel laser materials and nanoscience.
Presenting a blend of applied and fundamental research in highly interdisciplinary subjects of rapidly developing areas, this book contains contributions on the frontiers and hot topics of laser physics, laser technology and laser engineering, and covers a wide range of laser topics, from all-optical signal processing and chaotic optical communication to production of superwicking surfaces, correction of extremely high-power beams, and generation of ultrabroadband spectra. It presents both review-type contributions and well researched and documented case studies, and is intended for graduate students, young scientist, and emeritus scientist working/studying in laser physics, optoelectronics, optics, photonics, and adjacent areas. The book contains both experimental and theoretical studies, as well as combinations of these two, which is known to be a most useful and interesting form of reporting scientific results, allowing students to really learn from each contribution. The book contains over 130 illustrations.
Emerging Laser Technologies for High-Power and Ultrafast Science includes chapters from leading experts devoted to the most recent achievements in the field. Including cutting-edge topics such as high energy/high average power laser systems, the most current developments for high repetition rate high average power infrared fiber laser systems, breakthroughs of the development of CPA based on chromium doped zinc selenide gain material, infrared/mid-infrared laser systems based on high average power Ytterbium pumped OPCPA, and generation of ultrashort laser pulses in the UV spectral range. This book will serve as an important reference for students, researchers, scientists, and engineers interested in the development of next generation of ultrafast laser technologies.
The only introductory text on the market today that explains the underlying physics and engineering applicable to all lasers Although lasers are becoming increasingly important in our high-tech environment, many of the technicians and engineers who install, operate, and maintain them have had little, if any, formal training in the field of electro-optics. This can result in less efficient usage of these important tools. Introduction to Laser Technology, Fourth Edition provides readers with a good understanding of what a laser is and what it can and cannot do. The book explains what types of laser to use for different purposes and how a laser can be modified to improve its performance in a given application. With a unique combination of clarity and technical depth, the book explains the characteristics and important applications of commercial lasers worldwide and discusses light and optics, the fundamental elements of lasers, and laser modification.? In addition to new chapter-end problems, the Fourth Edition includes new and expanded chapter material on: Material and wavelength Diode Laser Arrays Quantum-cascade lasers Fiber lasers Thin-disk and slab lasers Ultrafast fiber lasers Raman lasers Quasi-phase matching Optically pumped semiconductor lasers Introduction to Laser Technology, Fourth Edition is an excellent book for students, technicians, engineers, and other professionals seeking a fuller, more formal introduction to the field of laser technology.
Although the basic principles of lasers have remained unchanged in the past 20 years, there has been a shift in the kinds of lasers generating interest. Providing a comprehensive introduction to the operating principles and applications of lasers, this second edition of the classic book on the subject reveals the latest developments and applications of lasers. Placing more emphasis on applications of lasers and on optical physics, the book's self-contained discussions will appeal to physicists, chemists, optical scientists, engineers, and advanced undergraduate students.
Due to their unique flexibility and high reproducibility, lasers have been traditionally used in processes such as cutting, drilling, machining, welding or cladding. In recent years, with the development of ultrafast laser sources, (ie: laser sources emitting pulses with durations ranging from picoseconds to femtoseconds), lasers also emerged as a new and promising tool for the texturing of virtually all kinds of surfaces. In Chapter One, a brief overview of the lasers and techniques utilised in micro- and nano-surface modifications is presented, followed by a detailed discussion of the surface chemistry and topography effect on bacteria aggregation and adhesion. Also, the role of the laser-induced superficial patterns on the response and sensitivity of bio-implants will be explored in depth. Chapter Two reports on cardiovascular laser application by using the open-irrigated ELMA catheter RytmoLas as an intriguing alternative for catheter ablation of arrhythmias. Chapter Three describes a novel feature designed for ELAI in which different colouration codes for the different metals are applied, enabling a good regional allocation of a specific metal within the tissues. Chapter Four focuses on laser ablation processing of metallic and polymeric thin films used in microelectromechanical systems technology for the fabrication of microfluidic devices with integrated electrodes on printed circuit boards (PCB-MEMS). Chapter Five presents typical micro and nanotextured surfaces created by direct irradiation under stationary and non-stationary conditions and the mechanisms behind their development and growth are discussed. Chapter Six describes a novel three-dimensional (3-D) fabrication process of micro-scale shell resonator made of single-crystal diamond (SCD). Chapter Seven discusses the data about structural and morphological characteristics of nano-sized transition-metal oxides of zirconium and molybdenum produced by laser ablation in water.
The three volumes VIII/1A, B, C document the state of the art of "Laser Physics and Applications". Scientific trends and related technological aspects are considered by compiling results and conclusions from phenomenology, observation and experience. Reliable data, physical fundamentals and detailed references are presented. In the recent decades the laser beam source matured to a universal tool common to scientific research as well as to industrial use. Today a technical goal is the generation of optical power towards shorter wavelengths, shorter pulses and higher power for application in science and industry. Tailoring the optical energy in wavelength, space and time is a requirement for the investigation of laser-induced processes, i.e. excitation, non-linear amplification, storage of optical energy, etc. According to the actual trends in laser research and development, Vol. VIII/1 is split into three parts: Vol. VIII/1A with its two subvolumes 1A1 and 1A2 covers laser fundamentals, Vol. VIII/1B deals with laser systems and Vol. VIII/1C gives an overview on laser applications.
This timely publication presents a review of the most recent developments in the field of Semiconductor Disk Lasers. Covering a wide range of key topics, such as operating principles, thermal management, nonlinear frequency conversion, semiconductor materials, short pulse generation, electrical pumping, and laser applications, the book provides readers with a comprehensive account of the fundamentals and latest advances in this rich and diverse field. In so doing, it brings together contributions from world experts at major collaborative research centers in Europe and the USA. Each chapter includes a tutorial style introduction to the selected topic suitable for postgraduate students and scientists with a basic background in optics - making it of interest to a wide range of scientists, researchers, engineers and physicists working and interested in this rapidly developing field. It will also serve as additional reading for students in the field.
Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.
Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing - Provides revised, expanded and updated coverage