Download Free Advanced Materials Characterization Book in PDF and EPUB Free Download. You can read online Advanced Materials Characterization and write the review.

This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Volume is indexed by Thomson Reuters BCI (WoS). Nowadays, an impressively large number of powerful characterization techniques is being used by physicists, chemists, biologists and engineers in order to solve analytical research problems; especially those related to the investigation of the properties of new materials for advanced applications. Although there are a few available books which deal with such experimental techniques, they are either too exhaustive and cover very few techniques or are too elementary to provide a solid basis for learning to use the characterization technique. Moreover, such books usually over-emphasize the textbook approach: being full of theoretical concepts and mathematical derivations, and omitting the practical instruction required in order to permit newcomers to use the techniques.
Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. - Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques - Reviews the determination of microstructural and mechanical properties - Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries - Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials
"A thoroughly updated and expanded new edition, this work features a logical, detailed, and self-contained coverage of the latest materials characterization techniques. Reflecting the enormous progress in the field since the last edition, this book details a variety of new powerful and accessible tools, improvements in methods arising from new instrumentation and approaches to sample preparation, and characterization techniques for new types of materials, such as nanomaterials. Researchers in materials science and related fields will be able to identify and apply the most appropriate method in their work"--
This book focuses on the widely used experimental techniques available for the structural, morphological, and spectroscopic characterization of materials. Recent developments in a wide range of experimental techniques and their application to the quantification of materials properties are an essential side of this book. Moreover, it provides concise but thorough coverage of the practical and theoretical aspects of the analytical techniques used to characterize a wide variety of functional nanomaterials. The book provides an overview of widely used characterization techniques for a broad audience: from beginners and graduate students, to advanced specialists in both academia and industry.
Experts must be able to analyze and distinguish all materials, or combinations of materials, in use today-whether they be metals, ceramics, polymers, semiconductors, or composites. To understand a material's structure, how that structure determines its properties, and how that material will subsequently work in technological applications, researche
The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. - Teaches effective use of advanced analysis and characterization methods at an atomistic level - Contains many supporting examples of materials in which such design concepts have been successfully applied
Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.
These papers by leading experts look at current methods for synthesizing new materials. The methods presented include chemical vapor deposition synthesis, solution synthesis, pyrolysis and combustion synthesis, and polymer synthesis. Featuring in-depth coverage of ceramic materials, the volume also discusses group III nitrides, fullerenes, and ferroelectrics.
Advanced Green Materials: Fabrication, Characterization and Applications of Biopolymers and Biocomposites looks at their extraction, purification, modification, and processing for various industrial, biomedical, pharmaceutical, and construction applications. The book comprehensively summarizes recent technical research accomplishments in natural materials and discusses various aspects of natural materials from a chemistry/engineering point of view. The book is unique with contributions from experts working on hybrid biopolymers and bio- composites, bioactive and biodegradable materials, bio-inert polymers and composites, natural polymer and composites, and metallic natural materials. The book will be a useful reference for scientists, academicians, research scholars, and biotechnologists. Advanced biocomposite materials continue to become increasingly popular and important for a broad range of different science and engineering applications. In the race to exploit the unique mechanical, thermal, and electrical properties of these materials, researchers must also address new challenges to predict, understand, and manage the potentially adverse effects they could have on the environment and human lives. The book describes recent developments and applications of biopolymers and biocomposites for applications in various industrial fields. Chapters include original research and the latest reviews in similar fields. Biopolymers and biocomposites occupy an exceptional position in the exciting new world of novel biomaterials. Considering their sustainability, non-toxic properties, and their ability to have tailored properties and functions, they should be considered as a smart candidate in the advancement of biomaterials technology. - Covers all types of biopolymers and advanced industrial applications, from packaging to biomedical therapeutics - Discusses the shift from research to industrial large-scale application of biopolymers and biocomposites - Emphasizes new strategic trends, such as bio-based and biodegradable additives for bioplastics, PHAs, new lignin-based biopolymers, and new polymers based on terpenes and biosensor applications